Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Terminals

Long cable terminals (x20)

Fabricante: Sloting Plus

Ref: SP108011

€3.54

Long cable terminals made of brass (1.5 mm diameter × 4.4 mm total length), supplied in a pack of 20 units. A small detail that makes a difference in the wiring of your slot car or model railway electrical installation.

Calcas

40 adhesive numbers 1-4

Fabricante: MITOOS

Ref: CXM523

€3.97

Forty reusable vinyl adhesive numbers, numbered from 1 to 4, designed to identify lanes in slot and Scalextric competitions. They stick and peel off easily, leaving no marks, facilitating race organisation and the work of track marshals.

Calcas

60 adhesive dorsal numbers 1-6

Fabricante: MITOOS

Ref: CXM522

€4.96

Sixty reusable adhesive numbers from 1 to 6 for accurately organising slot competitions. Easy to stick and remove, they help identify each car's lane and streamline the work of marshals at corner exits.

Calcas

80 adhesive dorsal numbers 1-8

Fabricante: MITOOS

Ref: CXM521

€6.32

Eighty reusable adhesive numbers, numbered from 1 to 8, designed to organise slot racing competitions clearly and efficiently. They facilitate lane identification and streamline the work of track marshals at each corner exit.

Calcas

100 adhesive numbers 1-10

Fabricante: MITOOS

Ref: CXM520

€7.92

Organise your slot competitions like a professional: 100 reusable adhesive numbers numbered from 1 to 10, designed for club tracks with up to 10 lanes. Essential for identifying cars and facilitating the work of track marshals at each corner exit.

Corona Z31 x 16,8 engranaje angular 11grados PLATA

Coronas anglewinder

Crown gear Z31 x 16.8 angular gear 11 degrees SILVER

Fabricante: Sloting Plus

Ref: SP072531

€7.60

Sloting Plus Z31 crown gear of 16.8 mm and angled pinion at 11 degrees, finished in silver. Designed for anglewinder setups with NSR triangular mounts, SC RT4 and closed angle 3D chassis. Lightweight (0.6 g) and precise, with standard axle pitch of 3/32 (2.38 mm).

Corona Z30 x 16,8 engranaje angular 11grados ORO

Coronas anglewinder

Crown gear Z30 x 16.8 angular gear 11 degrees GOLD

Fabricante: Sloting Plus

Ref: SP072530

€7.60

Golden crown gear with 30 teeth and a diameter of 16.8 mm with an 11° bevel gear, designed by Sloting Plus for anglewinder configurations. Compatible with NSR triangular mounts, SC RT4, and closed geometry 3D chassis. 3/32 (2.38 mm) axle and weighing just 0.6 g.

Corona Z29 x 16,8 engranaje angular 11grados VERDE

Coronas anglewinder

Crown gear Z29 x 16.8 11-degree bevel gear GREEN

Fabricante: Sloting Plus

Ref: SP072529

€7.60

Sloting Plus crown gear Z29 x 16.8 mm with 11-degree angled gear for anglewinder configurations. Compatible with NSR triangular brackets, SC RT4 bracket and most closed-angle 3D chassis. Lightweight (0.6 g) and precise, identified in green for quick identification in the pit box.

Corona Z28 x 16,8 engranaje angular 11grados AZUL

Coronas anglewinder

Crown gear Z28 x 16.8 angular gear 11 degrees BLUE

Fabricante: Sloting Plus

Ref: SP072528

€7.60

28-tooth crown gear for 11-degree anglewinder configurations, with a diameter of 16.8 mm and a 3/32" axle. Compatible with NSR triangular mounts, SC RT4, and most closed-angle 3D chassis. Lightweight (0.6 g) and in striking blue for easy identification at a glance on the workbench.

Herramientas

Special screw M8 tip 1.45 mm

Fabricante: Sloting Plus

Ref: SP140021

€14.10

Special M8 screw with a 1.45 mm tip from Sloting Plus, designed for precision adjustments in the preparation and setup of slot cars. A small part that makes a difference in assembly.

Herramientas

Special screw M8 tip 1.45 mm

Fabricante: Sloting Plus

Ref: SP140020

€14.10

Special M8 screw with a 1.45 mm tip from Sloting Plus, designed for adjustment and preparation tasks in slot racing with the precision required by competitive or the most demanding workshop.

Rodamiento de bolas para eje de 3 mm. -ABEC 7-

Bearings

Ball bearing for 3 mm axle -ABEC 7-

Fabricante: Sloting Plus

Ref: SP058001

€10.88

Precision ball bearing ABEC 7 for 3 mm axle from Sloting Plus. Designed to minimise friction and ensure smooth and consistent rolling in your most demanding slot car setups.

Bearings

Evo Lub universal bearing

Fabricante: Sloting Plus

Ref: SP051003

€2.40

The Evo Lub universal bearing from Sloting Plus (SP051003) offers a reliable and precise solution for axle preparation in slot cars on universal track. With measurements of 2-38-3-32, it fits perfectly in Scalextric and Ninco mounts.

Herramientas

Special screw M6 TIP Ø 1.45 mm.

Fabricante: Sloting Plus

Ref: SP140022

€11.44

Special M6 screw with a tip of Ø 1.45 mm designed to extract pinions with a hole of Ø 1.48/1.49 mm. Compatible with the UNIVERSAL pinion extractor of Sloting Plus. Made from A303 stainless steel with a 10-year guarantee against breakage or manufacturing defects.

Herramientas

Special screw M6 TIP Ø 1.9 mm.

Fabricante: Sloting Plus

Ref: SP140023

€11.44

M6 extractor screw with a tip of Ø 1.9 mm, made of A303 stainless steel, with a 10-year warranty from Sloting Plus. Ideal for extracting pinions with a hole of Ø 1.98/1.99 mm (motor shafts of Ø 2 mm). Total length 44 mm, weight 10 g. Bag with 1 unit.

Belts

MXL belt z54 2mm wide - 1pc

Fabricante: MITOOS

Ref: CXM454

€3.47

MXL timing belt with 54 teeth and 2 mm width, compatible with the entire range of Mitoos toothed pulleys —both plastic and aluminium— to transmit high revolutions without loss of traction. Single unit.

Belts

MXL belt z46 - 2mm - 1pc

Fabricante: MITOOS

Ref: CXM446

€3.47

MXL timing belt with 46 teeth and 2 mm width manufactured by Mitoos. Compatible with the entire range of Mitoos toothed pulleys —both plastic and aluminium— for a slip-free transmission with no loss of traction at high revolutions.

Belts

MXL belt z44 2mm wide - 1pc

Fabricante: MITOOS

Ref: CXM444

€3.47

MXL timing belt with 44 teeth and 2 mm width, designed to fit perfectly with the entire range of Mitoos toothed pulleys —both plastic (M136-M140) and aluminium (M143-M149)— and ensure a clean transmission without loss of traction at high revolutions.

Out-of-Stock

Storage

New Controller Case

Fabricante: Sloting Plus

Ref: SP138903

€20.00

Rigid EVA fabric case in black to protect your competition controller from impacts, dust, and moisture. With dimensions of 26×19×6 cm, it is compact, durable, and perfect for taking to the club or circuit with complete peace of mind.

View

Nylon

Fine nylon pinion z10

Fabricante: Sloting Plus

Ref: SP083010

€1.80

Fine (F) nylon pinion Z10 from Sloting Plus, designed to smooth power delivery and braking. Narrower tooth than the standard Z9 model, greater spacing between gears and wide compatibility with market crowns. Pack of 4 units in purple colour.

Motors

Motor Speed 3 21500RPM 340g 12V

Fabricante: Sloting Plus

Ref: SP090003

€12.00

Powerful performance and linear delivery are the hallmarks of the Speed 3 Motor from Sloting Plus. With 21500 RPM, 340g of torque, and powered at 12V, it offers usable performance throughout the acceleration range, ideal for those seeking real progression on track.

Storage

Plastic box 165x75x45 mm

Fabricante: Sloting Plus

Ref: SP999021

€1.60

Thermoformed plastic box with internal dimensions of 165 x 75 x 45 mm, ideal for storing and organising spare parts, tools, and small slot components. Sold in 1 unit.

of motor

80 M2x6mm Extra flat head Torx T6 screws

Fabricante: Sloting Plus

Ref: SP158706

€8.80

M2x6mm flat head screws (0.9mm) with Torx T6 profile, designed by Sloting Plus specifically for the preparation of slot car models in scales 1/32 and 1/24. Bag of 80 units with T6 screwdriver and plastic container of 42 x Ø14mm included.

Rodamiento de bolas eje de 2,38 mm. doble pared

Bearings

2.38mm double wall ball bearing.

Fabricante: Sloting Plus

Ref: SP055200

€12.00

Double-walled ball bearing for 2.38 mm axle, designed by Sloting Plus for chassis that require two-lip bearings. High durability with proper maintenance, compatible with a wide variety of competitive and recreational slot car setups.

Showing 73-96 of 660 item(s)