Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Nylon

9d Pinion M50 Nylon

Fabricante: Scaleauto

Ref: SC-1009

€1.94

9-tooth pinion with a 50 module made of high-durability nylon, compatible with standard 2 mm axles. It comes in a pack of 4 units, ideal for preparation and replacement in competition slot car assemblies.

Nylon

8t pinion. M50 Nylon

Fabricante: Scaleauto

Ref: SC-1008

€1.94

8-tooth pinion in module 50 made of high-durability nylon, designed for motors with a standard 2 mm shaft. Packaged in a set of 4 units, it is a key component in the transmission of any Scaleauto slot car setup.

SC-1124R - Tope Corona Aligerado M2.5 Rojo

Stoppers

Lightened Crown Stop M2.5 Red

Fabricante: Scaleauto

Ref: SC-1124R

€6.59

Lightened crown gear stop M2.5 in red from Scaleauto, designed for axles of 2.38 mm. With dimensions of 6.20 x 2.48 mm and weighing only 0.15 g, it provides reliable support and minimal rotating mass in any transmission setup.

Crown 26d In-Line Blue Nylon Procomp-RS SC-1112R

Coronas en linea

26d Crown Gear In-Line in Blue Nylon Procomp-RS

Fabricante: Scaleauto

Ref: SC-1112R

€7.20

26-tooth crown gear in blue nylon designed for the In-Line configuration of the Scaleauto Procomp-RS chassis. A key component to keep the transmission on point with smoothness and precision in every session.

SC-1111R - Corona 25d. In-Line en Nylon Naranja Procomp-RS de Scaleauto

Coronas en linea

25d Crown Gear. In-Line in Nylon

Fabricante: Scaleauto

Ref: SC-1111R

€7.20

25-tooth inline crown gear in orange nylon from Scaleauto, designed for 3/32 axle and secured with M2.5 screw. A straightforward transmission component to install, offering precise mechanical response for inline track configurations.

SC-4761AS25 Neumático 19,5x10,5mm (shore 25)

In Stock

Rear

Tyre 19.5x10.5mm (shore 25)

Fabricante: Scaleauto

Ref: SC-4761AS25

€6.95

Scaleauto soft rubber Shore 25 Racing Slick tyre, measuring 19.5x10.5mm. Designed for wheels from 15.8 to 17mm, it offers a competition profile with the feel and grip demanded by the track.

SC-4760AS25 Neumático 18,5x10,5mm (shore 25)

In Stock

Rear

Tyre 18.5x10.5mm (shore 25)

Fabricante: Scaleauto

Ref: SC-4760AS25

€6.96

Scaleauto soft rubber Shore 25 Racing Slick tyre (ref. SC-4760AS25), measuring 18.5x10.5mm and compatible with wheels from 15.8 to 17mm. An option designed for those seeking maximum grip on track.

SC-4756AS25 Neumático 20x10,5mm (shore 25)

Online only

In Stock

Rear

Tyre 20x10.5mm (shore 25)

Fabricante: Scaleauto

Ref: SC-4756AS25

€6.96

Scaleauto Racing Slick A-S25 rubber tyre in Shore 25, measuring 20x10.5 mm and compatible with rims from 15.8 to 17 mm. A soft hardness that delivers real traction from the first lap, designed for those who fine-tune every tenth on track.

SC-4752AS25 Neumático 19x10,5mm (shore 25)

In stock

Rear

Tyre 19x10.5mm (shore 25)

Fabricante: Scaleauto

Ref: SC-4752AS25

€6.95

Soft Shore 25 rubber Racing Slick tyre from Scaleauto, with dimensions 19x10.5mm and compatible with wheels from 15.8 to 17mm. A benchmark option for those seeking the best grip on track without sacrificing durability.

Braids

Standard 0.25 tinned braid cut

Fabricante: Sloting Plus

Ref: SP103149

€2.80

STANDARD FLAT tinned copper braid from Sloting Plus, cut to 3 cm and ready to install. With a thickness of 0.25 mm and a width of 3.3 mm, it provides reliable and uniform current transmission. Pack of 10 units.

SP103148 - Trencilla estañada STANDARD 0,35

Braids

Standard Flat Tinned Braid 0.25

Fabricante: Sloting Plus

Ref: SP103148

€5.28

Sloting Plus tinned copper braid in STANDARD FLAT format: 0.25 mm thick and 3.3 mm wide, presented in a 1-metre bag. A reliable reference for the tuning and setup of your competition or recreational slot cars.

Trencilla estañada STANDARD 0,35 cortada

Braids

Standard 0.35 tinned braid cut

Fabricante: Sloting Plus

Ref: SP103147

€2.80

Sloting Plus tinned copper braids ready to mount: 0.35 mm thick, 3.3 mm wide and cut to 3 cm. Pack of 10 units to always have the essential spare for your guide on hand.

SP103146 - Trencilla estañada STANDARD FLAT 0,35

Braids

Standard 0.35 tinned braid

Fabricante: Sloting Plus

Ref: SP103146

€5.28

Sloting Plus tinned copper braid in STANDARD FLAT format: 0.35 mm thick, 3.3 mm wide, cut into strips of 3 cm and presented in a 1 metre bag. Reliable contact and constant conductivity to keep your slot car's electrical performance on point.

Corona Z27 x 16 Ø angular Morada - Invertida

Coronas anglewinder

Z27 x 16 Ø angular Purple Crown - Inverted

Fabricante: Sloting Plus

Ref: SP072427

€7.20

Z27 angular crown gear made of lightweight duraluminium in purple with inverted configuration. Designed for a 2.38 mm (3/32'') axle, it offers extreme lightness and precise transmission for competitive anglewinder setups.

SP072426 Corona Z26 x 16 Ø angular Aluminio - Invertida

Coronas anglewinder

Z26 Crown Gear x 16 Ø Angular Aluminium - Inverted

Fabricante: Sloting Plus

Ref: SP072426

€7.20

Lightweight Z26 duraluminium crown gear in inverted configuration, with a diameter of 16 mm and standard inverted gear pitch. Designed for a 2.38 mm (3/32'') axle, it weighs only 0.6 g and is secured with an M2.5 x 3 mm allen screw. Bag with 1 unit.

Steel

47.5mm Steel axle x2

Fabricante: Sloting Plus

Ref: SP041047

€3.35

Tempered and calibrated stainless steel axle of 47.5 mm in length and 2.38 mm in diameter (3/32"). Bag with 2 units. Precision and rigidity for demanding slot car assemblies where the centring and uniformity of the axle make a difference on track.

Magnesium

Urano wheel 16.9x8.5 Champagne

Fabricante: Sloting Plus

Ref: SP022323

€11.76

Sloting Plus Urano magnesium wheel in champagne colour: 16.9x8.5 mm, only 1.08 g per unit. Includes a bag with 2 wheels and 2 M2.5x3 mm allen screws, ready to assemble and hit the track.

Magnesium

Urano wheel 16.7x8.5 Champagne

Fabricante: Sloting Plus

Ref: SP022321

€11.76

Urano magnesium wheel in champagne finish, reference SP022321 from Sloting Plus. With a diameter of 16.7x8.5 mm and weighing only 1.08 g, it is an option to consider for those looking to reduce unsprung mass without sacrificing the rigidity of magnesium. Pack containing 2 units and 2 M2.5 x 3 mm allen screws included.

Coronas anglewinder

Crown gear 16 x z25 aluminium anglewinder red

Fabricante: Sloting Plus

Ref: SP072325

€7.20

Lightweight red duraluminium anglewinder crown gear with 25 teeth and 16 mm diameter, designed for a 2.38 mm (3/32'') axle. Weighing only 0.6 g, it provides real lightness to the transmission without compromising precision or durability. Includes M2.5 x 3 mm allen screw. Bag with 1 unit.

Coronas anglewinder

Crown gear 16 x z26 aluminium anglewinder silver

Fabricante: Sloting Plus

Ref: SP072326

€7.20

Lightweight Z26 duraluminium crown gear specially designed for anglewinder configurations. With a diameter of 16 mm, a thickness of 4.25 mm, and weighing only 0.6 g, it is a precise and lightweight option for those preparing their car with a competitive mindset.

Corona 17 x z31 alum anglewinder plata invertido

Coronas anglewinder

Crown gear 17 x z31 aluminium anglewinder inverted silver

Fabricante: Sloting Plus

Ref: SP072431

€7.20

Lightweight duraluminium crown Z31 teeth, diameter 17 mm, with anglewinder cut in inverted angle. Evolved design that allows for precise adjustment of the crown/pinion gear using different spacer thicknesses and various pinion diameters.

Corona 17 x z32 alum anglewinder negra invertido

Coronas anglewinder

Crown gear 17 x z32 aluminium anglewinder black inverted

Fabricante: Sloting Plus

Ref: SP072432

€7.20

Lightweight duraluminium crown Ø17 mm and 32 teeth with inverted size for anglewinder configurations. Allows adjustment of the crown-pinion distance with different spacers and accommodates various pinion diameters, providing very precise tuning.

Muelle UNIVERSAL para suspensión L10/3-SM20

Shock absorbers

UNIVERSAL spring for suspension L10/3-SM20

Fabricante: Sloting Plus

Ref: SP117030

€3.70

Universal stainless steel spring for slot suspensions, with an inner diameter of Ø 3 mm and a length of 10 mm, in soft-medium hardness. Pack of 6 units of reference SP117030 from Sloting Plus.

Muelle UNIVERSAL para suspensión L7/3-S20

For bench

UNIVERSAL spring for suspension L7/3-M20

Fabricante: Sloting Plus

Ref: SP117024

€3.70

Universal stainless steel spring for slot suspension, with an inner diameter of 3 mm and a length of 7 mm, medium hardness. Pack of 6 units, compatible with Scalextric and Ninco systems. Reference Sloting Plus SP117024.

Showing 937-960 of 1395 item(s)