Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Out-of-Stock

Workshop

SETTING BASE

Fabricante: MITOOS

Ref: CX1211

€6.95

Setup base with the Cartrix logo, functionally identical to the reference model Mitoos. A simple and practical accessory for adjusting and tuning your slot cars.

View

In Stock

Coronas anglewinder

32d Crown Gear Anglewinder 25° Procomp-R

Fabricante: Scaleauto

Ref: SC-1172br

€5.43

32-tooth crown gear anglewinder at 25° in reverse version from the Procomp-RS line by Scaleauto. A precision spare part designed for those who fine-tune the transmission of their slot racing competition setups.

In Stock

Coronas anglewinder

32d Crown Gear Anglewinder 25° Procomp-R

Fabricante: Scaleauto

Ref: SC-1172R

€5.43

32-tooth crown gear designed for 25° anglewinder configuration, specific for Scaleauto Procomp-R mounts. A key component when looking to adjust the gear ratio with precision and reliability on track.

In Stock

Coronas anglewinder

Crown gear 31d. Anglewinder 25° Procomp-R

Fabricante: Scaleauto

Ref: SC-1171R

€5.43

31-tooth crown gear specifically for 25° anglewinder setups, designed by Scaleauto for the Procomp-R line. A key component in the transmission if you are looking to fine-tune the gear ratio of your slot car.

Out-of-Stock

Guides and wires

Guide clips

Fabricante: Scaleauto

Ref: SC-1615

€3.40

Scaleauto guide clips (ref. SC-1615) for 1/24 scale, designed to securely hold the guide wire inside the chassis. A small detail that makes a difference in the performance and reliability of your slot car.

View

Holes

50mm x 3/32 Hollow axle PRO

Fabricante: Scaleauto

Ref: SC-1201

€3.80

PRO Scaleauto steel axle (ref. SC-1201) of 50 mm x 3/32, drilled and weighing only 0.90 g. A benchmark option for those looking to reduce rotating mass and fine-tune performance on track without compromising the rigidity of the assembly.

Out-of-Stock

Tyre additives

Wheel cleaner

Fabricante: Scaleauto

Ref: SC-5301

€11.24

Maintain maximum grip with the SC-5301 tyre cleaner. It quickly and safely removes dirt and debris from tyres, restoring original adhesion for more consistent and predictable driving in every session.

View

Lexan Interior

Lexan interior z4

Fabricante: Scaleauto

Ref: SC-6618b

€3.95

Have you considered putting a BMW Z4 GT3 track car in the mud of a rally? This lexan interior from Scaleauto (SC-6618b) is the piece you need to take that crazy yet irresistible idea to the finish.

Lexan Interior

Lexan interior

Fabricante: Scaleauto

Ref: SC-6631

€3.95

Scaleauto lexan interior (ref. SC-6631) designed for slot rally cars. It reduces the weight of the vehicle and contributes to better track balance, ideal for those looking to fine-tune every gram of their setup.

Lexan decorado universal velocidad Jerez

Lexan Interior

Universal decorated Lexan speed Jerez

Fabricante: Sloting Plus

Ref: SP395502

€7.20

Decorated lexan cockpit in Jerez version, suitable for universal track. It meets the needs of current models that do not have a specific lexan cockpit. Sold in a bag with 1 unit.

Lexan decorado universal velocidad Alcañiz

Lexan Interior

Universal decorated Lexan speed Alcañiz

Fabricante: Sloting Plus

Ref: SP395501

€7.20

Decorated lexan plastic cockpit, Alcañiz design, intended for speed models that do not have a specific cockpit. Compatible with universal track (Scalextric, Ninco). Bag with 1 unit. Ref. SP395501.

Controllers and power supplies

Open connector for controllers

Fabricante: Sloting Plus

Ref: SP138701

€6.00

Open connector for slot controllers made of fibre and metal. Includes 3 x 4 mm banana plugs with M3×3 allen screw and 2 ties, all in a bag with 1 unit. Designed to keep connections accessible and well organised at all times.

Grasa especial para transmisiones LUBBGREASE

Lubricants

Special grease for transmissions LUBBGREASE

Fabricante: Sloting Plus

Ref: SP120101

€8.35

Lubricating grease based on PTFE (Teflon) specifically formulated for slot car transmissions: protects pinions and crown gears, fills micropores, and ensures long-lasting lubrication in any combination of materials. Format of 4.5 ml, bag with 1 unit.

Braids

Copper braid cb race 1m

Fabricante: Sloting Plus

Ref: SP104125

€5.28

CB Race copper braid in a 1 metre format: 0.25 mm thick and 3.75 mm wide. An essential spare part to maintain a clean electrical contact and ensure the controller's response in every corner.

Belts

56mm green drive belt

Fabricante: Sloting Plus

Ref: SP079956

€4.00

Green rubber transmission belt from Sloting Plus (ref. SP079956): Ø56mm outer diameter and Ø1mm section. The colour code allows you to quickly identify the size installed on each axle, avoiding confusion during assembly or adjustment. Pack of 4 units.

Belts

54mm purple transmission belt

Fabricante: Sloting Plus

Ref: SP079954

€4.16

Purple rubber drive belt from Sloting Plus: 54 mm, 1 mm section and 56 mm outer diameter. The colour coding allows you to instantly identify the size and compare sensations between axles with total precision. Bag with 4 units.

Bearings

RRSS Victor's 2.38mm axle joint

Fabricante: Sloting Plus

Ref: SP053025

€7.20

Victor's RRSS brass joint for 2.38 mm (3/32") axle, with a diameter of 3.80 mm and a thickness of 2 mm. Compatible with all Slot.it and Black Arrow cradles. Sold in a pack of 6 units, ready to install and fine-tune your car's transmission.

Herramientas

T3 TORX tip torque screwdriver

Fabricante: Sloting Plus

Ref: SP141004

€19.20

Precision in every tightening: torque screwdriver with T3 TORX tip designed for M2 studs, with a 1.5 mm Allen key included. The essential ally for the preparer who pays attention to every detail of the assembly.

Herramientas

1.5mm torque screwdriver

Fabricante: Sloting Plus

Ref: SP141003

€19.20

Precision and control in every tightening: torque screwdriver with a 1.5 mm hexagonal tip, ideal for M3 allen screws in slot car preparation. Supplied in a bag with one unit plus a 1.5 mm allen key included.

Herramientas

1.3mm screwdriver torque

Fabricante: Sloting Plus

Ref: SP141002

€19.20

Precision and control in every tightening: torque screwdriver with a 1.3 mm hex tip for M2.5 Allen screws, ideal for fine tuning your slot car. Includes a 1.5 mm Allen key.

Herramientas

Torque screwdriver tip 0.9mm

Fabricante: Sloting Plus

Ref: SP141001

€19.20

Precision and control in every tightening: the 0.9 mm hex tip torque screwdriver from Sloting Plus is designed for M2 Allen screws and comes with a ready-to-use 1.5 mm Allen key.

Eje hueco con tratamiento de titanio 2,38 x 52,5mm

Holes

60mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042160

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approximately 8 microns, 60 mm in length and 2.38 mm in diameter (3/32"). Greater resistance to wear and traction in competition. Bag with 1 unit, weight 1.27 g.

Holes

57.5mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042157

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, in a format of 57.5 mm x 2.38 mm (3/32''). Greater resistance to wear and traction for demanding competition. 1.23 g. Bag with 1 unit.

Holes

55mm x Hollow axle with titanium treatment 2.38

Fabricante: Sloting Plus

Ref: SP042155

€4.40

Hollow stainless steel axle calibrated with a titanium coating of approx. 8 µm, measuring 55 mm x 2.38 mm (3/32"). A preparation solution that combines lightness and high resistance to wear and traction for demanding assemblies.

Showing 1009-1032 of 1395 item(s)