Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Accessories

ADHESIVE BALANCE WEIGHT 100X50X1MM

Fabricante: Scaleauto

Ref: SC-1511

€3.49

Scaleauto adhesive counterweight sheet (100×50×1mm) to adjust the weight distribution of your slot car with complete freedom. Cut it to the exact size you need and stick it where the chassis needs it most.

Stoppers

Lightened M2 stopper

Fabricante: Scaleauto

Ref: SC-1124

€6.59

Lightened M2 stopper from Sloting Plus (ref. SC-1124) specifically designed for 2.38 mm (3/32") axles. A simple yet crucial part for securing and properly positioning the rear axle components with minimal mass.

Piñón de 13d 7,5mm extraible con tornillo

Coronas en linea

30d nylon In-Line crown gear for 3/32" axle Red

Fabricante: Scaleauto

Ref: SC-1100

€5.20

30-tooth nylon crown gear designed for In-Line configurations with a 3/32" axle. Silent transmission, precise fit, and finished in red for easy identification on the workbench.

Motors

Motor SC-27 Sprinter 1 Jr

Fabricante: Scaleauto

Ref: SC-0027B

€13.20

The Scaleauto SC-27 Sprinter 1 Jr Motor (ref. SC-0027B) offers 18,000 rpm and a torque of 14.5 g·cm, a combination designed for those seeking progressive and controllable performance in Junior categories.

Motors

Motor Speed 12 21500RPM 230g 12V

Fabricante: Sloting Plus

Ref: SP090012

€11.20

Well-balanced power and torque in a single motor: 21,500 rpm and 230 g·cm of torque at 12V, with an equivalence of approximately 1.4 UMS. A solid option for slot setups that seek consistent performance without sacrificing control.

Nylon

Nylon pinion z10

Fabricante: Sloting Plus

Ref: SP082910

€2.15

nylon pinion Z10 with a shaft diameter of 6 mm in purple, supplied in a pack of 4 units. A reliable and lightweight option for the transmission of your slot car.

Nylon

Nylon pinion z9

Fabricante: Sloting Plus

Ref: SP082909

€2.15

Z9 nylon pinion with a diameter of 5.5 mm in blue, presented in a pack of 4 units. A reference spare part for the transmission of your slot car, easy to identify thanks to its colour and ready to be mounted in your club or workshop setups.

Nylon

Nylon pinion z8

Fabricante: Sloting Plus

Ref: SP082908

€2.15

Z8 nylon pinion for 5 mm axle in striking orange colour, presented in a pack of 4 units. A lightweight and quiet option to keep your slot car's transmission in top condition.

Corona sidewinder z34 azul Ø19,0 SLPL8334

Cross crowns

Gold sidewinder crown z35 Ø19.0 SLPL8335

Fabricante: Sloting Plus

Ref: SP074935

€7.20

Lightweight duraluminium crown gear from Sloting Plus, designed for sidewinder configurations with a 3/32'' (2.38 mm) axle. 35 teeth, Ø19 mm, only 0.85 g: performance without dead weight, with M2.5 x 3 mm allen screw included.

Corona sidewinder z33 rosa Ø18,0 SLPL8233

Cross crowns

Sidewinder crown z33 pink Ø18.0 SLPL8233

Fabricante: Sloting Plus

Ref: SP074833

€7.20

Lightweight duraluminium crown gear for sidewinder mounting in slot cars. With 33 teeth, a diameter of 18 mm and only 0.8 g, it is a part designed for those who seek every tenth on the clock without compromising reliability.

Corona sidewinder z32 negra Ø18,0 SLPL8232

Cross crowns

Black sidewinder crown gear z32 Ø18.0 SLPL8232

Fabricante: Sloting Plus

Ref: SP074832

€7.20

Z32 crown gear in sidewinder configuration from Sloting Plus: lightweight duraluminium, Ø18 mm, only 0.8 g and 3/32'' axle. A precision piece designed for those seeking immediate response and consistency in every corner.

Corona sidewinder z31 plata Ø18,0 SLPL8231

Cross crowns

Sidewinder crown z31 silver Ø18.0 SLPL8231

Fabricante: Sloting Plus

Ref: SP074831

€7.20

Lightweight duraluminium crown gear for sidewinder setups, with 31 teeth, Ø18 mm and only 0.8 g of weight. Designed for a 2.38 mm (3/32'') axle, it is secured with an M2.5 x 3 mm allen screw and is sold in a pack of 1 unit.

Corona sidewinder z36 lila Ø17,5 SLPL8136

Cross crowns

Sidewinder crown z36 purple Ø17.5 SLPL8136

Fabricante: Sloting Plus

Ref: SP074736

€7.20

Lightweight duraluminium crown gear from Sloting Plus for sidewinder mounting, with 36 teeth, a diameter of 17.5 mm and weighing just 0.75 g. Designed for a 2.38 mm (3/32'') axle, it offers a balanced gear ratio and clean, precise rotation. Supplied with M2.5 x 3 mm allen screw.

Cross crowns

Gold sidewinder crown gear z35 Ø17.5

Fabricante: Sloting Plus

Ref: SP074735

€7.20

Lightweight duraluminium crown gear for sidewinder configuration, with 35 teeth, Ø17.5 mm and weighing just 0.75 grams. Designed for a 2.38 mm (3/32'') axle, it combines lightness and precision for those looking to fine-tune the transmission of their slot car.

Corona 16 x z30 alum anglewinder amarilla

Coronas anglewinder

Crown gear 16 x z30 aluminium anglewinder yellow

Fabricante: Sloting Plus

Ref: SP072330

€7.20

Lightweight duraluminium crown gear with 30 teeth for anglewinder configurations, designed for a shaft of 2.38 mm (3/32''). With a diameter of 16 mm, weighing just 0.65 g and finished in yellow, it is a direct piece for the drivetrain without compromises.

Corona 16 x z28 alum anglewinder azul (SLPL8028)

Coronas anglewinder

Crown gear 16 x z29 aluminium anglewinder green (SLPL8029)

Fabricante: Sloting Plus

Ref: SP072329

€7.20

Lightweight duraluminium crown gear with 29 teeth for anglewinder configurations, with a shaft of 2.38 mm (3/32''). Weighs only 0.65 g, has a diameter of 16 mm and a total thickness of 4.25 mm. Identified in green, includes M2.5 x 3 mm allen screw. Bag contains 1 unit.

Coronas anglewinder

Crown gear 16 x z28 aluminium anglewinder blue (SLPL8028)

Fabricante: Sloting Plus

Ref: SP072328

€7.20

Lightweight duraluminium crown gear with 28 teeth for anglewinder configuration, designed for a 2.38 mm (3/32'') axle. Weighing only 0.65 g and finished in anodised blue, it is a key component for adjusting the gear ratio without adding unnecessary weight to the rear end.

Coronas anglewinder

Crown gear 16 x z27 aluminium anglewinder purple (SLPL8027)

Fabricante: Sloting Plus

Ref: SP072327

€7.20

Lightweight duraluminium crown gear with 27 teeth specific for anglewinder configurations: 16 mm in diameter, 4.25 mm thick, 0.65 g and axle of 2.38 mm (3/32"). A tuning part that makes a difference in transmission and response.

Separador acero inox 0,2mm para guia 1/32 (x20)

Spacers

Stainless steel spacer 0.2mm for guide 1/24 (x20)

Fabricante: Sloting Plus

Ref: SP069102

€4.32

Stainless steel spacers of 0.2 mm designed for guide in 1/24 scale. Each pack includes 20 units, ideal for precisely adjusting the axial play and achieving a perfectly centred guide on the track.

Separador acero inox 0,1mm para guia 1/32 (x20)

Spacers

Stainless steel spacer 0.1mm for guide 1/24 (x20)

Fabricante: Sloting Plus

Ref: SP069101

€4.80

0.1 mm stainless steel spacers designed for fine adjustment of the guide in 1/24 scale. Bag with 20 units to always have the exact thickness you need on hand.

Out-of-Stock

Spacers

Stainless steel spacer 0.2mm for guide 1/32 (x20)

Fabricante: Sloting Plus

Ref: SP069002

€4.80

0.2 mm stainless steel spacers for guide in 1/32 scale. Packaged in bags of 20 units, they allow for precise adjustment of the vertical play of the guide and fine-tune the car's response on track.

View

Spacers

Bronze spacer 2mm axle 2.38mm (x20)

Fabricante: Sloting Plus

Ref: SP062205

€4.00

Brass spacers 2 mm thick for a 2.38 mm (3/32'') axle with a 3.2 mm outer diameter. Pack of 20 units, ideal for precisely adjusting the lateral position of crown gears, pinions, and wheels in the preparation of your slot car.

Spacers

Bronze spacer 1mm axle 2.38mm (x20)

Fabricante: Sloting Plus

Ref: SP062203

€4.00

1 mm thick brass spacers for a 2.38 mm (3/32") axle with a 3.2 mm outer diameter. Perfect for precisely adjusting the position of wheels, crown gears, and other drivetrain components. Pack of 20 units.

Spacers

Bronze spacer 0.5mm axle 2.38mm (x20)

Fabricante: Sloting Plus

Ref: SP062201

€4.00

Twenty Sloting Plus brass spacers with an exact thickness of 0.5 mm and an inner diameter of 2.38 mm (3/32"). Low friction, high strength, and the precision needed to fine-tune tracks and transmissions with complete reliability.

Showing 1129-1152 of 1395 item(s)