Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Others

Rain-1 tyres

Fabricante: MITOOS

Ref: CXM044

€4.50

Designed to simulate wet racing without affecting track grip, the Rain-1 drastically reduce traction and turn every session into a driving challenge filled with drifting. Compatible with 15.5 mm or larger wheels.

Others

Rain-0 tyres

Fabricante: MITOOS

Ref: CXM043

€4.50

Designed to simulate wet racing without altering track grip, the Rain-0 tyres (ref. CXM043) turn each heat into a test of driving skill: spectacular drifts and driving on the edge guaranteed. Compatible with 15 mm or smaller wheels.

Others

Tyres x4 Dry-2

Fabricante: MITOOS

Ref: CXM042

€4.48

Four Dry-2 tyres (ref. CXM042) designed for 16.5 mm rims. Their compound offers controlled slip, ideal for adjusting your driving style to your preferences and the type of track.

Out-of-Stock

Others

Tyres x4 Dry-1

Fabricante: MITOOS

Ref: CXM041

€4.50

Four Dry-1 tyres designed for those who enjoy controlled drifting on track. Compatible with wheels of 15.5 mm or larger, they provide that precise and predictable slip that makes the difference between a spectacular drift and a track exit.

View

Others

Tyres x4 Dry-0

Fabricante: MITOOS

Ref: CXM040

€4.50

Four Dry-0 tyres (ref. CXM040) designed for wheels up to 15.5 mm. Their controlled slip compound offers a progressive track response that is ideal for both club sessions and competition setups.

Kit suspensión larga RT con 2 muelles duros y 2 blandos

In Stock

For bench

RT long suspension kit with 2 hard springs and 2 soft springs

Fabricante: Scaleauto

Ref: SC-5128A

€6.82

RT long suspension kit (ref. SC-5128A) with 2 hard springs and 2 soft springs to adjust the stiffness of the front or rear end of your slot car. A straightforward way to fine-tune cornering behaviour and gain consistency lap after lap.

Out-of-Stock

Wheels and tyres

RT 25x13 rubber tyre slicks

Fabricante: Scaleauto

Ref: SC-4749

€5.95

RT rubber slick tyres in size 25x13, designed to provide consistent grip and a clean footprint on the track. A solid option for tuners and drivers looking for consistency lap after lap.

View

Out-of-Stock

Controllers and power supplies

PARMA ECONOMY 60 OHM CONTROLLER

Fabricante: Scaleauto

Ref: P-217

€32.93

The Parma Economy 60 Ohm controller (ref. P-217) offers precise and progressive control for slot track driving, with a resistance of 60 ohms designed for those seeking reliability at an affordable price.

View

In Stock

Coronas anglewinder

27d crown gear. Anglewinder 25°

Fabricante: Scaleauto

Ref: SC-1167R

€5.43

27-tooth nylon crown gear designed for 25° anglewinder configurations. Compatible with the Procomp-RS M50 motor group, 2.38 mm axle, and 15.8 mm outer diameter. Fixed with M2.5 screw.

Rear

S5 Tyres

Fabricante: Sloting Plus

Ref: SLPLM-S5

€6.30

S5 tyres from Sloting Plus in size 18x10.5mm, designed to provide reliable grip and consistent performance on track. A preparation option for demanding enthusiasts.

Rear

S2 Tyres

Fabricante: Sloting Plus

Ref: SLPLM-S2

€5.00

S2 tyres from Sloting Plus in size 18x10mm, designed as precision replacements for slot cars. A reliable option to maintain grip and response on track with a direct and uncomplicated fit.

Rear

S1 Tyres

Fabricante: Sloting Plus

Ref: SLPLM-S1

€5.00

S1 tyres from Sloting Plus in size 17x10 mm, designed to improve grip and stability of your slot car on track. A reliable spare from the Sloting Plus tuning catalogue.

Out-of-Stock

Cross crowns

Straight tooth crown z33 sidewinder

Fabricante: Sloting Plus

Ref: SLPL8133

€6.10

Sloting Plus z33 straight tooth crown gear for Sidewinder configurations. Diameter 17.5 mm and shaft of 2.38 mm (3/32"), designed for those seeking precision in transmission without compromising reliability on track.

View

Cross crowns

Straight tooth crown z35 sidewinder

Fabricante: Sloting Plus

Ref: SLPL8135

€6.10

Z35 straight tooth crown gear from Sloting Plus for Sidewinder configurations. Diameter 17.5 mm and shaft of 2.38 mm (3/32"), designed to provide a clean and efficient transmission in your competition or regular running setups.

Cross crowns

Straight tooth crown z36 sidewinder

Fabricante: Sloting Plus

Ref: SLPL8136

€6.10

Sloting Plus straight tooth crown gear z36 designed for Sidewinder setups. With a diameter of 17.5 mm and a shaft of 2.38 mm (3/32"), it provides precise and direct transmission to optimise the performance of your slot car.

Set 4 palomillas tres brazos "Borrani" para llanta M026

Plastic

Set of 4 three-arm "Borrani" wing nuts for M026 wheel

Fabricante: MITOOS

Ref: CXM135

€1.50

Four three-arm wing nuts with a Borrani design for M026 wheels. A touch of classic authenticity that makes a difference in any worthy slot car.

In Stock

Allen and Torx screw

10 M2.5 Allen screws

Fabricante: MITOOS

Ref: CXM121

€2.49

Ten M2.5 Allen screws ready for the assembly, adjustment, and preparation of your slot and modelling projects. A workshop consumable that is advisable to have on hand when working with precision.

Allen and Torx screw

10 M2 Allen screws

Fabricante: MITOOS

Ref: CXM120

€2.49

Ten precise metric M2 Allen screws, designed for the adjustment and fixing of components in slot preparation, chassis assembly, and modelling work. A small spare part that makes a difference when detail matters.

2 Muelles suspension pequeños 5mm x 3,7 Ø mm

In Stock

1/32 spare parts

2 small suspension springs 5mm x 3.7 Ø mm

Fabricante: MITOOS

Ref: CXM106

€1.84

Two small suspension springs (5 mm × 3.7 mm Ø) for slot chassis. Ideal for replacing or fine-tuning the suspension system and maintaining stable contact with the track.

2 Muelles suspension medianos 12mm x Ø 3,7 mm

In Stock

1/32 spare parts

2 Medium suspension springs 12mm x Ø 3.7mm

Fabricante: MITOOS

Ref: CXM105

€1.84

Two medium suspension springs of 12 mm length and Ø 3.7 mm, designed for fine tuning of slot car chassis. A small part with a direct and noticeable impact on stability and driving feel.

In Stock

Accessories

Mitoos pivoting spring

Fabricante: MITOOS

Ref: CXM104

€1.84

Pair of steel springs for Mitoos swing arm, with an outer diameter of 4.7 mm and a width of 4.5 mm. Direct replacement part for Panda chassis (M905) and 75mm chassis (M907), essential for maintaining suspension geometry in check.

2 Muelles amortiguador std duro ROJO 40mm x Ø 4mm

In Stock

1/32 spare parts

2 standard hard RED shock absorber springs 40mm x Ø 4mm

Fabricante: MITOOS

Ref: CXM103

€1.84

Pack of 2 standard hard shock absorber springs in red, 40 mm x Ø 4 mm (ref. CXM103). A common choice in setups aimed at firmness and quick response, both on club tracks and in competition.

2 Muelles amortiguador std medio AZUL 40mm x Ø4mm

1/32 spare parts

2 standard medium shock springs BLUE 40mm x Ø4mm

Fabricante: MITOOS

Ref: CXM102

€1.84

Two standard medium hardness shock springs in blue, measurements 40 mm x Ø4 mm. Designed to adjust the suspension of your slot chassis and fine-tune track performance with precision.

2 Muelles amortiguador std blando VERDE 40mm x Ø4mm

1/32 spare parts

2 standard soft GREEN shock absorber springs 40mm x Ø4mm

Fabricante: MITOOS

Ref: CXM101

€1.84

Pack of 2 standard shock absorber springs in green, soft calibrated, with measurements 40 mm x Ø4 mm. A precise solution for adjusting the suspension of your slot car when you seek maximum sensitivity to the terrain and stability in corners.

Showing 1297-1320 of 1395 item(s)