Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Callaway GT3 Adac Gt master 2021 nº77 -R Version-

Modern GT

Callaway GT3 Adac Gt master 2021 no.77 -R Version-

Fabricante: Scaleauto

Ref: SC-6347R

€79.92

The Callaway GT3 no. 77 from the ADAC GT Master 2021 arrives in R version with long can motor SC-0011 at 20,000 rpm, Anglewinder configuration, rear wheels in aluminium and bronze spherical bearings. Careful exterior detail and complete interior, ready to run from the first moment.

Separadores Eje de 3mm. en acero 0,5mm Photoedge

1/24 Spare Parts

3mm Shaft Spacers in 0.25mm Photoetched Steel

Fabricante: Scaleauto

Ref: SC-8111F

€5.20

3 mm axle spacers made of 0.25 mm steel by Scaleauto under the Photoedge line. Designed for fine adjustment of the running gear in 1/24 scale, they allow precise tuning of the lateral position of axles and wheels in the assembly of your slot car.

1/24 Spare Parts

3mm Shaft Spacers in 0.5mm Photoetch Steel

Fabricante: Scaleauto

Ref: SC-8111E

€5.20

3mm axle spacers made of 0.5mm steel from the Photoedge line of Scaleauto, reference SC-8111E, for 1/24 scale. A precision spare part designed for the millimetric adjustment of the running gear and the tuning of your slot car.

1/24 Spare Parts

3mm axle spacers in 1mm brass.

Fabricante: Scaleauto

Ref: SC-8111D

€4.72

3 mm axle spacers made of brass with a thickness of 1 mm, reference SC-8111D from Scaleauto. Designed to fine-tune the lateral positioning of the axle in 1/24 scale slot car setups, providing precision and consistency in every preparation.

1/24 Spare Parts

3mm axle spacers in 1.5mm brass

Fabricante: Scaleauto

Ref: SC-8111C

€4.72

3 mm axle spacers made of 1.5 mm thick brass, reference SC-8111C from Scaleauto for 1/24 scale. A small detail in preparation that makes a difference in the fit and alignment of the drivetrain.

1/24 Spare Parts

3mm axle spacers. 3mm brass

Fabricante: Scaleauto

Ref: SC-8111B

€5.20

3 mm axle spacers made of brass by Scaleauto, designed for 1/24 scale. They allow precise adjustment of the lateral positioning of wheels and axles in your slot car setups and tuning.

1/24 Spare Parts

3mm axle spacers in brass 5mm.

Fabricante: Scaleauto

Ref: SC-8111A

€5.20

3 mm axle spacers made of 5 mm brass from Scaleauto, reference SC-8111A for 1/24 scale. A small spare part with a key role: achieving the exact lateral adjustment of the rear axle and fine-tuning the car's behaviour on track.

Interior Plus + Cristales en Lexan para Hyundai I20 WRC

Out-of-Stock

1/24 bodies

Interior Plus + Lexan Windows for Hyundai I20 WRC

Fabricante: Scaleauto

Ref: SC-7922

€5.12

Detailed interior set and Lexan windows specifically designed for the Belkits Hyundai I20 WRC body in 1/24 scale. A replacement from Scaleauto that enhances the realism of your body with fitted and precisely finished parts.

View

Modern GT

P911 (992 model) GT3 24h LM2024 Team Manthey n92

Fabricante: Scaleauto

Ref: SC-6420R

€79.92

Slot replica of the Porsche 911 (992) GT3 from Team Manthey that competed in the 24h of Le Mans 2024, in R racing version. SC-0011 motor with 20,000 rpm, rear wheels in aluminium, RT3 anglewinder mount and removable magnet. Includes display case.

twin-pack-p911-992-gt3-le-mans-2024-winner-scaleauto.jpg

Resins and Collectors

Porsche 911 (992) GT3 R Manthey EMA Le Mans 2024 Winner Twin Pack

Fabricante: Scaleauto

Ref: SC-6419PACK

€159.92

Limited edition of 300 units worldwide: the Scaleauto Twin Pack commemorating Manthey EMA's victory at the 2024 24 Hours of Le Mans, featuring the race numbers 91 and 92 of the Porsche 911 (992) GT3 R reproduced with exceptional fidelity. A collector's item with a competitive spirit.

Porsche 911 Carrera RSR 3.0 1974 White Racing Kit

In Stock

Modern GT

Porsche 911 Carrera RSR 3.0 1974 White Racing Kit

Fabricante: Scaleauto

Ref: SC-6204

€60.72

Complete Scaleauto kit with unpainted white body of the Porsche 911 Carrera RSR 3.0 1974 and fully assembled soft chassis R2.0 in-flex Anglewinder. Perfect for customising with your own livery and competing confidently on the Sport track.

Modern GT

Porsche 911 Carrera RS 2.7 1973 White Racing Kit

Fabricante: Scaleauto

Ref: SC-6203

€60.72

Complete racing kit of the legendary 1973 Porsche 911 Carrera RS 2.7 in unpainted white body, ready for customisation. Includes fully assembled soft chassis R2.0, SC-0011 motor with 20,000 rpm and anglewinder configuration. The perfect base to build your own RS.

Interior en Lexan para P-911 RS-RSR 3.0 rally

Lexan Interior

Lexan interior for P-911 RS-RSR 3.0 rally

Fabricante: Scaleauto

Ref: SC-6695

€4.00

Lexan interior from Scaleauto (SC-6695) specifically designed for the P-911 RS-RSR 3.0 in rally version. Lightweight replacement part with precise fit that restores realism to your body shell and maintains the visual integrity of the model on track.

Lexan Interior

Lexan interior for P-911 RS-RSR 3.0

Fabricante: Scaleauto

Ref: SC-6694

€4.00

Official spare part from Scaleauto: interior in specific Lexan for the P-911 RS-RSR 3.0, reference SC-6694. Keep the cockpit of your slot car in perfect condition with a custom-designed piece for this 1/32 scale model.

Allen and Torx screw

M2.5 x 2 Allen screw

Fabricante: Sloting Plus

Ref: SP152500

€5.12

M2.5 x 2 mm steel Allen screw from Sloting Plus for 1/32 slot wheels. Requires a 1.3 mm Allen key or bit and is sold in a pack of 20 units. Greater durability and tightening strength than conventional screws.

Controllers and power supplies

Trigger for PRO R-II controller (two fingers)

Fabricante: Sloting Plus

Ref: SP138915

€12.80

Replacement trigger for the PRO R-II controller from Sloting Plus, specifically designed for use with two fingers. Original reference SP138915 that ensures a perfect replacement and restores the controller's usual feel and response.

Controllers and power supplies

Trigger for PRO R-II controller (one finger)

Fabricante: Sloting Plus

Ref: SP138914

€12.80

Spare 3D printed plastic trigger for the Sloting Plus PRO R-II controller (one finger). Thanks to its material, it can be sanded and trimmed within certain limits to adapt to the morphology and grip style of each driver.

Magnesium

Wheel 16.2 x 8.5 mm. URANO EVO II

Fabricante: Sloting Plus

Ref: SP022514

€12.72

The natural evolution of the Urano family: magnesium wheel of 16.2 x 8.5 mm. with lightweight inner flank and M2.5 x 2.5 mm. Allen screw for near-perfect balance. Only 0.84 g per unit. Bag with 2 units.

Guide

Pivoting guide arm chassis Raid 90mm

Fabricante: MITOOS

Ref: CXM931.3

€7.95

Original MITOOS spare part for the 90mm Raid chassis. The pivoting arm keeps the guide in continuous contact with the track, preserving stability and electrical pickup. Reference CXM931.3. Chassis not included.

Neumático Goma 19x10mm New Shore 30 para Llantas ø15/17mm

Out-of-Stock

Rear

Rubber Tyre 25x13mm Slicks New Shore 30 for Wheels ø19-21mm

Fabricante: Scaleauto

Ref: SC-4749SH30

€6.96

Scaleauto rubber slick tyres in size 25x13mm and Shore hardness 30, designed for wheels with a diameter of ø19 to 21mm in 1/32 scale. Pack of 4 units ideal for the rear axle, with a soft profile that translates each lap into greater grip and consistency on the asphalt.

View

Neum. Goma A-S25 (Shore 25) 19,5x10,5mm Racing Slick para Llantas de 15,8 a 17mm. Bulk Pack 50 unid

Out-of-Stock

Rear

Rubber Tyre 19x10mm New Shore 30 for Wheels ø15/17mm

Fabricante: Scaleauto

Ref: SC-4735SH30

€6.96

Scaleauto rubber slick tyre in size 19x10mm and Shore hardness 30, compatible with wheels of ø15 to 17mm. Pack of 4 units designed for rear replacement in 1/32 competition.

View

Corona 23d. nylon In-Line para eje de 3/32" Rosa

Coronas en linea

34d In-Line Nylon Crown Gear for 3.0mm Shaft with M2.5 Screw Fixing (green)

Fabricante: Scaleauto

Ref: SC-1104R

€7.20

34-tooth In-Line crown gear made of nylon for a 3.0 mm axle with M2.5 screw fixation, by Scaleauto (ref. SC-1104R). Quick identification in green, manufactured for inline setups in 1/32 slot cars that demand precision and reliability in transmission.

Broca de bricolaje slot y modelismo 2,5mm

Herramientas

Drill for reworking crowns, wheels and bearings. Pitch 2.38 (3/32 mm)

Fabricante: Tectime

Ref: TT060

€3.02

Tectime workshop drill (ref. TT060) with a pitch of 2.38 mm (3/32) designed for precisely reworking crowns, wheels, and bearings in slot car preparation and modelling tasks. A specific tool for a specific job: clean and damage-free adjustment on each piece.

Calcas

Mitoos Decals CLASSIC NUMBERS

Fabricante: MITOOS

Ref: CXM549

€6.00

Mitoos water transfer decal sheet with classic style numbers to decorate your slot cars. 70x100 mm sheet that allows for clean and precise applications on the bodywork.

Showing 121-144 of 1593 item(s)