Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Aplicación de aceite de ultra baja densidad en rodamientos de precisión.
Last items in stock
Lubricants

Ultra Low Density High Competition Slot Oil

Fabricante: Tectime
Ref: TT0342
€5.25
Specifically formulated for high competition in slot racing, this ultra-low density oil from Tectime penetrates into the tightest spaces of bearings and bushings without play, eliminating drag effect and allowing the axle to rotate freely to extract maximum performance from the motor.
Lexan Interior

Generic rally Lexan interior 1/32

Fabricante: Tectime
Ref: TT3094
€2.91
Generic Lexan interior from Tectime for rally bodies in 1/32 scale. Reduces weight in the upper part of the model, improves the centre of gravity, and meets the most demanding technical checks. Includes driver and co-driver busts, with an adaptability that makes it suitable for a wide variety of bodies.
Belts

MXL belt z57-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM457
€3.49
Mitoos MXL pitch timing belt, 57 teeth and 2 mm wide. Perfect fit with the entire range of Mitoos toothed pulleys —both plastic and aluminium— to transmit high revolutions without losing traction.
Correa MXL z50 2mm ancho - 1ud
Last items in stock
Belts

MXL belt z56-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM456
€3.49
Standardised MXL timing belt with 56 teeth and 2 mm width, compatible with the entire range of Mitoos toothed pulleys, both in plastic and aluminium. Lossless traction transmission at high revolutions, with guaranteed perfect fit.
Belts

MXL belt z59-2mm - 1 unit.

Fabricante: MITOOS
Ref: CXM459
€3.49
MXL pitch timing belt with 59 teeth and 2 mm width, designed by Mitoos to fit precisely with its entire range of toothed pulleys, both plastic and aluminium. Clean transmission and no loss of traction even at high revolutions.
Correa MXL z50 2mm ancho - 1ud
Last items in stock
Belts

MXL belt z58-2mm - 1 pc.

Fabricante: MITOOS
Ref: CXM458
€3.49
MXL z58 toothed belt, 2 mm wide, for high-revolution transmission between shafts. Perfect fit with Mitoos toothed pulleys, both in plastic and aluminium versions, without loss of traction.
Vista de la correa Mitoos M455 con ancho de 2 mm.
Last items in stock
Belts

Mitoos MXL z55 timing belt

Fabricante: MITOOS
Ref: CXM455
€3.49
Mitoos MXL z55 toothed belt with 55 teeth and 2 mm width for pulley drive systems in 1/32 slot cars. Direct power transfer, strong braking, and quiet running without the stretch typical of traditional rubber bands.
chasis-207-block-aw-r05-evo3-m101013-solo-chasis.png
Last items in stock
3D chassis, Fibre, Metal..

Chassis 207 Block AW-R 0.5 EVO3 compatible Avant

Fabricante: Tectime
Ref: M-101013
€15.95
The Tectime 207 Block AW-R 0.5 EVO3 chassis brings competition technology to 1/32 slot racing with a new generation polymer, Anglewinder configuration, and a motor offset of 0.5 mm. Specifically designed for Avant bodies and rally stages, it offers flexibility, lightness, and traction that are hard to match in its category.
chasis-subaru-block-aw-r05-evo3-m104313.png
Last items in stock
3D chassis, Fibre, Metal..

Subaru Block AW- R 0.5 EVO3 chassis compatible with Avant

Fabricante: Tectime
Ref: M-104313
€15.92
Subaru Block AW-R 0.5 EVO3 chassis from Tectime made of advanced high-flexibility polymer, with Anglewinder configuration and 0.5 mm offset. Fully compatible with the Avant body, it is the ideal component to maximise performance on any rally stage or speed circuit.
chasis-207-block-aw-r05-evo3-m101013.png
Last items in stock
3D chassis, Fibre, Metal..

Chassis 207 Block AW-R 0.5 EVO3 compatible Avant

Fabricante: Tectime
Ref: M-101013
€15.92
Tectime chassis for Peugeot 207 body made of high-tech technical polymer, with specification Anglewinder R 0.5 EVO3 and motor offset of 0.5 mm. Fully compatible with Avant base and accessories, it offers controlled torsion, a low centre of gravity, and accommodates wheels from 16.2 mm to adjust the setup with complete freedom.
chasis-evo-x-block-aw-r05-evo3-m104413.png
Last items in stock
3D chassis, Fibre, Metal..

Evo X Block AW R 0.5 EVO3 compatible chassis Avant

Fabricante: Tectime
Ref: M-104413
€15.92
High competition chassis in technical polymer, designed by Tectime for Anglewinder configuration and compatible with Avant models. The R 0.5 EVO3 evolution offers controlled flexibility and a low centre of gravity, resulting in greater stability and more precise cornering.
chasis-peugeot-208-block-r-evo3-aw-m106413.png
Last items in stock
3D chassis, Fibre, Metal..

Peugeot 208 Block-R AW 0.5 EVO3 chassis compatible with Scaleauto

Fabricante: Tectime
Ref: M-106413
€15.92
Tectime chassis for Peugeot 208 in Anglewinder configuration with Block-R EVO3 geometry and 0.5 mm offset. Made from high-tech polymer, it offers the ideal balance between torsion and rigidity for 1/32 slot racing. Compatible with Scaleauto models.
Lexan velocidad P.9x8 LMH (comp. Scaleauto)
Last items in stock
Lexan Interior

NSR compatible C8R speed Lexan

Fabricante: Tectime
Ref: M-L14V
€2.40
Competition lexan interior manufactured by Tectime for NSR Corvette C8R bodies. Designed for speed disciplines, its ultra-lightweight design reduces weight and lowers the centre of gravity, improving stability in the fastest corners.
Lexan Interior

Lexan rally Sierra compatible with Avant Slot

Fabricante: Tectime
Ref: M-L0077R
€2.40
Vacuum-formed lexan interior (cockpit) for Ford Sierra rally, compatible with Avant Slot models. It drastically reduces weight compared to the original injected plastic, decreases the inertia of the body and improves the car's response in direction changes. Reference Tectime M-L0077R.
Lexan Interior

Scaleauto compatible Lexan Skoda Fabia Rally2

Fabricante: Tectime
Ref: M-L0076R
€2.40
Vacuum formed lexan interior specifically for the Skoda Fabia Rally2, compatible with Scaleauto (ref. M-L0076R). Reduces weight in the upper area of the car, lowers the centre of gravity, and improves cornering stability without sacrificing the realism of the rally cockpit.
Lexan rally Fiesta (comp. SCX)
Last items in stock
Lexan Interior

Scaleauto compatible Lexan Skoda Fabia R5

Fabricante: Tectime
Ref: M-L0075R
€2.50
Thermoformed lexan interior specifically for the Skoda Fabia R5 in 1/32 scale, compatible with Scaleauto bodies. Part of the Tectime line that reduces the weight of the assembly and helps lower the centre of gravity, with a detailed finish and ideal flexibility for rally slot racing.
Chasis Toyota Yaris WRC1 AW-R 0.5 EVO3 para Avant Slot
Last items in stock
3D chassis, Fibre, Metal..

Toyota Yaris WRC1 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime
Ref: M-107313
€15.62
The Mustang Slot Design M-107313 chassis in EVO3 version is specifically designed for the Avant Slot Toyota Yaris WRC1 body. AW-R 0.5 geometry with the motor in Anglewinder position, high-tech flexible polymer, and compatibility with wheels from 16.2 mm. Chassis only, without body.
Guide

Pivoting guide arm chassis Raid 90mm

Fabricante: MITOOS
Ref: CXM931.3
€7.95
Original MITOOS spare part for the 90mm Raid chassis. The pivoting arm keeps the guide in continuous contact with the track, preserving stability and electrical pickup. Reference CXM931.3. Chassis not included.
Broca de bricolaje slot y modelismo 2,5mm
Last items in stock
Herramientas

Drill for reworking crowns, wheels and bearings. Pitch 2.38 (3/32 mm)

Fabricante: Tectime
Ref: TT060
€3.02
Tectime workshop drill (ref. TT060) with a pitch of 2.38 mm (3/32) designed for precisely reworking crowns, wheels, and bearings in slot car preparation and modelling tasks. A specific tool for a specific job: clean and damage-free adjustment on each piece.
Tarmac Works 1/64 Ferrari 488 GTE 24h de Le Mans 2023 nº57
Last items in stock
€27.60
One of the most iconic victories in the history of miniature motorsport: the Mazda 787B no. 18 that conquered the 24 Hours of Le Mans in 1991, recreated in 1/64 scale by BM-Creations in the grey and yellow colours of the Mazdaspeed team. Driven by Kennedy, Johansson, and Sandro Sala.
Calca Mitoos LOGOS CLÁSICOS I
Last items in stock
Calcas

Mitoos Decals CLASSIC NUMBERS

Fabricante: MITOOS
Ref: CXM549
€6.00
Mitoos water transfer decal sheet with classic style numbers to decorate your slot cars. 70x100 mm sheet that allows for clean and precise applications on the bodywork.
Calca Mitoos LOGOS CLÁSICOS I
Last items in stock
Calcas

Mitoos Decal CLASSIC LOGOS I

Fabricante: MITOOS
Ref: CXM547
€6.00
Mitoos water transfer decal with a selection of classic logos to customise your models. 70x100 mm sheet ready to apply with water on any prepared surface.
Calca Mitoos MARTINI
Last items in stock
Calcas

Mitoos MARTINI decal

Fabricante: MITOOS
Ref: CXM544
€6.00
Mitoos water transfer decal with MARTINI decoration, ref. CXM544. 70×100 mm sheet ready to apply to your slot models and give them the unmistakable Martini Racing finish with total precision.
Calcas

Mitoos GULF decal

Fabricante: MITOOS
Ref: CXM535
€6.00
Water decal with the unmistakable GULF decoration from Mitoos, on a 70×100 mm sheet. Perfect for giving that authentic and competitive touch to your slot cars or static models.
Showing 1-24 of 425 item(s)

Bienvenido a Ministry of Hobby, tu tienda de referencia para todo lo relacionado con el mundo del hobby a escala. Si llevas años en esto o acabas de descubrir el placer de coleccionar, preparar o competir con miniaturas, aquí vas a encontrar algo más que productos: vas a encontrar criterio, especialización y una selección pensada por y para aficionados de verdad.

Nuestro catálogo abarca disciplinas muy distintas, pero todas comparten algo: la atención al detalle, la pasión por lo pequeño y la satisfacción de tener en la mano —o en la pista— algo bien hecho. Desde coches slot listos para competir hasta miniaturas diecast de colección, pasando por pinturas, aerógrafos, herramientas de taller, repuestos técnicos y todo lo necesario para el modelismo estático, figuras y dioramas. Un universo amplio con una filosofía común.

Este es el punto de partida de tu visita. A partir de aquí puedes explorar por categorías, por marca o por la disciplina que más te apasione. Si tienes dudas, nuestro equipo conoce el producto de primera mano y puede orientarte sin rodeos. Porque no hay nada peor que comprar algo que no encaja con lo que necesitas.

Qué encontrarás en Ministry of Hobby

El catálogo está organizado en grandes áreas que responden a las necesidades reales de cada tipo de aficionado. No mezclamos todo en un cajón: cada sección tiene profundidad real, con referencias seleccionadas y actualizadas.

Slot

El mundo del slot es mucho más amplio de lo que parece desde fuera. Aquí trabajamos con coches de competición en escalas 1/32 y 1/24, repuestos técnicos para preparación y reglaje, pistas y electrónica, y todo el equipamiento necesario para correr en casa o en club. Marcas como NSR, Slot.it, Avant Slot, Scaleauto, Scalextric o Ninco tienen presencia con catálogos trabajados. Si buscas un coche de caja para estrenar o un motor específico para mejorar tu montura de competición, esta es tu sección.

Diecast y coleccionismo

Las miniaturas diecast son otra forma de vivir el hobby: sin pistas, sin preparaciones, con el foco puesto en el detalle, la escala y el valor coleccionista. Trabajamos con diferentes escalas —desde 1/18 hasta 1/64— y con criterio para seleccionar modelos que realmente merezcan un hueco en tu vitrina. Coches de competición históricos, modelos de carretera clásicos, ediciones limitadas... hay mucho donde elegir.

Modelismo, maquetas y figuras

El modelismo estático, las figuras y los dioramas tienen un espacio propio y bien surtido. Pinturas acrílicas de marcas como Vallejo, Tamiya, Kaleido o Ammo; aerógrafos para todos los niveles; herramientas de precisión; calcas; masillas; bases y materiales para dioramas. Una sección pensada tanto para quien empieza como para quien ya tiene una técnica desarrollada y busca materiales específicos.

Taller y mantenimiento

Un buen aficionado cuida su material. En esta área encontrarás lubricantes, limpiadores, herramientas de taller, productos de acabado y todo lo necesario para mantener tus coches, maquetas y miniaturas en perfecto estado. Pequeños detalles que marcan la diferencia entre una pieza que dura años y una que se deteriora por falta de cuidado.

Cómo está organizado el catálogo

Hemos estructurado la tienda para que sea fácil encontrar lo que buscas, tanto si sabes exactamente qué quieres como si estás explorando. Puedes navegar por disciplina, por tipo de producto o directamente por marca. Las fichas de producto incluyen información técnica real: compatibilidades, características, orientación de uso. No llenamos las descripciones de palabras vacías.

Si en algún momento no encuentras algo o tienes dudas sobre qué producto se adapta mejor a tu caso, puedes contactarnos directamente. Preferimos orientarte bien antes de que compres algo que luego no te encaje.

Por qué comprar aquí y no en cualquier otro sitio

Esta es una pregunta legítima. La respuesta honesta es que Ministry of Hobby no es una tienda generalista que vende de todo. Es una tienda especializada, con un equipo que conoce el catálogo porque practica el hobby. Eso tiene consecuencias concretas:

  • Selección con criterio: no listamos todo lo que existe, sino lo que consideramos que tiene sentido recomendar.
  • Información técnica fiable: las descripciones, compatibilidades y consejos que lees están revisados por personas que entienden el producto.
  • Asesoramiento real: si tienes una duda técnica, no recibirás una respuesta de catálogo. Te diremos lo que sabemos con franqueza.
  • Comunidad y contexto: entendemos el ecosistema del hobby —clubs, competiciones, tendencias, novedades— y eso se nota en cómo trabajamos.

Para quién es Ministry of Hobby

Para el aficionado al slot que lleva años preparando coches y quiere repuestos de calidad y buena información técnica. Para quien acaba de descubrir el mundo del diecast y no sabe por dónde empezar. Para el modelista que busca pinturas concretas o un aerógrafo nuevo. Para el coleccionista que quiere ampliar su vitrina con criterio. Y también para quien regala: aquí encontrarás opciones bien explicadas que facilitan elegir sin miedo a equivocarse.

No importa en qué punto del hobby estés. Lo importante es que encuentres aquí lo que necesitas —o que te ayudemos a encontrarlo.

Preguntas frecuentes

¿Qué disciplinas cubre Ministry of Hobby?

Cubrimos slot (coches, repuestos, pistas y electrónica), diecast y coleccionismo a escala, modelismo estático, figuras y dioramas, y todo el taller y materiales de pintura y acabado asociados a estas disciplinas.

¿Puedo encontrar tanto productos para principiantes como para usuarios avanzados?

Sí. El catálogo tiene productos para todos los niveles. En las fichas y en nuestras descripciones solemos indicar para qué perfil está más orientado cada producto, para que puedas elegir con criterio.

¿Trabajáis con las marcas más importantes del sector slot?

Trabajamos con NSR, Slot.it, Avant Slot, Scaleauto, Scalextric, Ninco y otras marcas de referencia, tanto en coches como en repuestos y electrónica.

¿Qué sistemas de pista slot tenéis disponibles?

Tenemos pistas y accesorios para los principales sistemas del mercado. Es importante saber que el carril universal es compatible con marcas como Scalextric y Ninco, mientras que el carril sport lo usan Scaleauto y Slot.it, entre otras. Si tienes dudas sobre compatibilidades, consúltanos antes de comprar.

¿Las pinturas y materiales de modelismo sirven solo para slot?

No. La sección de pinturas, aerógrafos y materiales de acabado está pensada para todo el modelismo: coches slot, maquetas estáticas, figuras y dioramas. Marcas como Vallejo, Tamiya, Kaleido o Ammo sirven para cualquiera de estas disciplinas.

¿Puedo pedir consejo antes de comprar?

Por supuesto. Puedes contactarnos por los canales disponibles en la tienda. Nuestro equipo conoce el catálogo de primera mano y puede orientarte sin compromiso.

¿Tenéis novedades frecuentes en el catálogo?

Sí. Actualizamos el catálogo con regularidad en función de las novedades de las marcas y la demanda de los aficionados. Si hay algo que buscas y no encuentras, consúltanos.

¿Qué diferencia hay entre un coche slot y una miniatura diecast?

Un coche slot está diseñado para circular sobre una pista con carril, tiene motor, guía y trencillas. Una miniatura diecast es un modelo de colección estático, fabricado generalmente en metal a presión, pensado para exhibirse. Son mundos distintos aunque comparten la pasión por las miniaturas a escala.

¿Trabajáis con resinas en coches slot?

Sí. Marcas como Avant Slot producen carrocerías en resina a nivel industrial para el mundo slot, con un nivel de detalle y acabado superior al plástico estándar. Las tenemos disponibles en nuestro catálogo.

¿Qué escala es más habitual en slot?

La escala 1/32 es la más extendida en el mundo del slot, tanto en uso doméstico como en competición. La escala 1/24 es más grande y habitual en competición avanzada o en coches de mayor detalle. En diecast, las escalas más comunes van desde 1/18 hasta 1/64, cada una con sus particularidades.

Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.