Skoda Fabia R5 Rally Monte Carlo 2020 n43 Gulf - A. Gino - R Version

The most sought-after Skoda Fabia R5 of the 2020 season, now on track with all the artillery of the R version from Scaleauto.

Features and Highlights

Scaleauto presents this 1/32 scale replica of the Skoda Fabia R5 that Alessandro Gino drove in the 2020 Monte Carlo Rally under race number 43, showcasing the legendary Gulf livery in its unmistakable sky blue and orange tones. The reference SC-6443R corresponds to the R version — the highest mechanical performance configuration from the Catalan brand — designed to compete uncompromisingly from the very first metre of track.

• Soft grey chassis with fully assembled R2.0 in-flex technology.
• Short can motor SC-0027, up to 18,000 rpm.
• Independent motor mount RT3 with offset -0.5 mm (reference SC-6536C): lower centre of gravity, better traction.
• Pinion-crown gear ratio 8/31 teeth: explosive acceleration and precise braking.
• Advanced guide with screw mounting SC-1608B.
• Calibrated hardened steel axles of 2.38 mm.
• Plastic front wheels and machined aluminium rear wheels.
• Front and rear tyres with high-grip RT compound.

Scale and Level of Detail

The ultra-light body faithfully reproduces the characteristic volumes of the Fabia R5, with a high-resolution tampography finish that recreates each sponsor, race number 43 on the doors and bonnet, and the aerodynamic appendages of the competition version. The cockpit features bucket seats, a safety structure, and detailed figures of the driver and co-driver with helmet and overalls. The optics, grilles, and skirts complete a piece that satisfies both the competitor and the collector.

On-Track Performance

The in-flex R2.0 chassis is the dynamic soul of this model. Its controlled flexibility allows all four wheels to maintain contact with the track during elevation changes and tight corners, eliminating the bounces that destabilise low-profile models in twisty sections. The RT3 mount with negative offset brings the motor closer to the ground, lowering the centre of gravity and improving overall stability without the need for additional ballast. The 8/31 teeth ratio offers a development designed for club tracks: lively acceleration and sufficient top speed without sacrificing control on corner entries.

The RT compound provides a notable level of grip on synthetic asphalt, especially in cold track conditions, perfectly fitting the wintry spirit of the Monte Carlo Rally that this car represents.

Ideal for…

• Club drivers seeking a winning base in the modern rally 1/32 category, ready to race straight out of the box.
• Collectors of the Gulf livery and the Fabia R5 miniatures saga.
• Recreational enthusiasts wanting to experience competitive behaviour on their home circuit without the need for additional preparation.
• Users of Sport track (Scaleauto, Slot.it) and other compatible systems like Scalextric or Carrera, thanks to the interchangeable guide.

Aspects to Consider

As an R version with SC-0027 motor and in-flex chassis, the vehicle is optimised for maximum performance. If you are a driver new to the club format, we recommend starting with moderate power to familiarise yourself with the motor's response before demanding its full potential. The RT3 mount with -0.5 mm offset comes factory mounted; if you wish to adjust the behaviour, Scaleauto offers complementary mounts with different offsets within its spare parts catalogue.

Frequently Asked Questions

Is it compatible with Scalextric and Carrera tracks?

Yes. The advanced guide SC-1608B is designed for Sport track (Scaleauto, Slot.it), but with the corresponding guide change from the Scaleauto catalogue, the car is also compatible with Universal track (Scalextric, Ninco) and other common geometries in club and home tracks.

Does it require running-in before competing?

The SC-0027 motor benefits from a gentle running-in period of between 30 and 60 minutes at reduced voltage (8-9 V). This settles the brushes and braids, extends the motor's lifespan, and improves the response curve from low revs.

What differentiates the R version from the standard version?

The R version comes standard with the in-flex R2.0 chassis, the RT3 mount with -0.5 mm offset, the SC-0027 motor at 18,000 rpm, and high-grip RT compound tyres. The standard version uses a less prepared mechanical setup, designed for more recreational use or for those who prefer to customise the base from scratch.

Do RT tyres require grip treatment?

The RT tyres from Scaleauto perform well dry on most plastic and wooden tracks without prior treatment. For high-level competition, some drivers apply a soft rubber conditioner to maximise grip in the first metres. Check your championship regulations before using any product.

Are the mechanical components easily replaceable?

Scaleauto has a wide catalogue of spare parts and specific accessories for its models: mounts, motors, pinions, crowns, axles, wheels, and tyres are available separately, making maintenance and customisation of the car for each type of track or regulation easier.

Is it suitable for home circuits or just for clubs?

Although designed for competition, its predictable behaviour thanks to the in-flex chassis makes it very enjoyable on home circuits as well. On shorter tracks, a voltage reducer or a controller with brake adjustment will help you manage the potential of the SC-0027 motor without losing the fun.

The Scaleauto SC-6443R is a 1/32 scale slot car replica of the Skoda Fabia R5 driven by Alessandro Gino at the 2020 Monte Carlo Rally, finished in the iconic Gulf livery with race number 43. Built for competitive slot racing, it features the R2.0 in-flex grey chassis, SC-0027 18,000 rpm motor, RT3 offset motor mount at -0.5 mm, 8/31 tooth gear ratio, 2.38 mm hardened steel axles, aluminium rear wheels, and RT high-grip tyres. A top choice for modern rally slot racing at 1/32 scale, club competition, and Gulf livery collectors.