Upper suspension bridges 25mm without ring for Thunderslot - T800 - T839024 (10 pcs.)

T800 Upper Bridges for Thunderslot Cradle: Precise Geometry and Minimal Weight in Upper Suspension

Within the category of dampers and suspension for 1/32 scale, small details make a big difference on track. These 25 mm upper suspension bridges without a ring, manufactured by T800, are designed for tuners who optimise every tenth of a gram in the chassis assembly without compromising structural rigidity.

Function and Performance

The upper suspension bridge is the component that links the cradle to the chassis and defines the working geometry of the damping system. By omitting the ring, the configuration becomes more compact and reduces the total weight of the assembly. At 0.090 g per unit, the accumulated savings compared to conventional injected plastic parts are significant when working on a competition setup where every milligram counts.

The measurement of 25 mm determines the positioning of the attachment point and must correspond exactly to the geometry of the Thunderslot cradle for which they have been designed. Do not attempt to adapt these bridges to cradles of other dimensions without first verifying compatibility.

T800 Material with Carbon Fibre Load

The T800 material used in their manufacture incorporates a carbon fibre load, which provides superior rigidity compared to standard plastic while maintaining a very low weight. The production using 3D printing technology allows for precise and repeatable geometries in each unit, ensuring that the 10 pieces in the pack are consistent with each other.

Compatibility

These bridges have been specifically developed for the Thunderslot cradle. If you have doubts about whether they fit your specific setup, consult the technical documentation of your chassis or contact us before placing your order.

Assembly and Preparation

Due to the hardness of the technical material, it is necessary to tap the holes with an M2 tap before installing the adjustment screws. This step is not optional: without it, the screw will not seat correctly and there is a risk of damaging the part during assembly. With the prior tapping well executed, the fine adjustment of the suspension is precise and the material withstands the stresses of continuous use in racing without fatigue.

• Tap the holes with an M2 tap before installing any screws.
• Work slowly and without forcing to avoid compromising the part.
• Ensure that the mounting geometry matches that of the Thunderslot cradle before final adjustment.

Common Errors

The most common mistake when working with 3D technical material parts is attempting to insert the screw without first tapping. The result is often an unusable part. Another common error is applying too much tightening force once assembled: the necessary adjustment to fix the geometry is sufficient, there is no need to tighten beyond that.

Frequently Asked Questions

How many units are included in the pack?

The T839024 pack includes 10 units of 25 mm upper suspension bridges without a ring.

For which cradle are these bridges designed?

They are specifically developed for the Thunderslot cradle. They are not designed for cradles from other brands or different dimensions.

What tap do I need to prepare them?

An M2 tap is required. This step is essential before installing any adjustment screws to avoid damaging the material.

How much does each unit weigh?

Each bridge weighs 0.090 g, making them an especially interesting option for competition setups where maximum weight savings in the upper chassis are sought.

Is T800 material fragile during assembly?

It is not fragile if worked correctly. The key is to tap the holes before inserting the screws and not to exceed the tightening. If this procedure is followed, the material is durable and maintains geometry under the usual stresses of racing.

Are they also sold with a ring?

The reference T839024 corresponds to the version without a ring. Check the T800 catalogue available in our store for other variants of suspension bridges.

T800 25mm upper suspension bridges without ring for Thunderslot cradle, reference T839024 — pack of 10 units. Manufactured in carbon fibre-loaded T800 material via 3D printing technology, weighing just 0.090 g each. Designed for 1/32 scale slot car competition preparation, these lightweight suspension components help fine-tune chassis geometry while keeping overall weight to a minimum. M2 thread tapping required before installation.