Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Ergal

Removable Pinion 13d. M50 ø6.75mm in Ergal for axle

Fabricante: Scaleauto

Ref: SC-1073E67

€6.32

Scaleauto removable pinion with 13 teeth, module 50 and shaft diameter of 6.75 mm made of Ergal: high-strength and lightweight aluminium for a direct, precise and durable track transmission.

Ergal

Removable Pinion 13d. M50 ø6.5mm in Ergal for axle

Fabricante: Scaleauto

Ref: SC-1073E65

€6.32

Scaleauto removable pinion with 13 teeth in Ergal, module 50 and axle diameter ø6.5 mm. A lightweight and rigid preparation piece that allows for quick changes to the gear ratio, designed for those who fine-tune every detail of their slot car.

Corona 36d. M50 nylon para eje 2.38mm O17.5mm

In Stock

Cross crowns

36d crown M50 nylon for axle 2.38mm O17.5mm

Fabricante: Scaleauto

Ref: SC-1156R

€5.43

36-tooth crown gear, module 50, made of nylon by Scaleauto. Designed for 2.38 mm axles with an outer diameter of 17.5 mm and secured with an M2.5 screw. A reliable transmission spare part to keep your slot car in top condition.

Corona 34d. Sidewinder M50 para eje 2.38mm O18.5mm con tornillo M2.5

In Stock

Cross crowns

34t crown. Sidewinder M50 for 2.38mm axle O18.5mm with M2.5 screw.

Fabricante: Scaleauto

Ref: SC-1144R

€5.60

34-tooth crown gear Sidewinder M50 from Scaleauto (SC-1144R), designed for a shaft of 2.38 mm and an outer diameter of 18.5 mm, with fixation using an M2.5 screw. A transmission piece intended to fine-tune the performance of your slot car.

Modern Rally

P208 WRX Barcelona 2016 no.9 S. Loeb

Fabricante: Scaleauto

Ref: SC-6207R

€79.95

The Peugeot 208 WRX that Sébastien Loeb drove in Barcelona 2016 arrives in slot scale from Scaleauto. Reference SC-6207R, manufactured with the level of detail and precision that distinguishes this brand for Sport track.

Out-of-Stock

Storage

New Controller Case

Fabricante: Sloting Plus

Ref: SP138903

€20.00

Rigid EVA fabric case in black to protect your competition controller from impacts, dust, and moisture. With dimensions of 26×19×6 cm, it is compact, durable, and perfect for taking to the club or circuit with complete peace of mind.

View

Nylon

Fine nylon pinion z10

Fabricante: Sloting Plus

Ref: SP083010

€1.80

Fine (F) nylon pinion Z10 from Sloting Plus, designed to smooth power delivery and braking. Narrower tooth than the standard Z9 model, greater spacing between gears and wide compatibility with market crowns. Pack of 4 units in purple colour.

Motors

Motor Speed 3 21500RPM 340g 12V

Fabricante: Sloting Plus

Ref: SP090003

€12.00

Powerful performance and linear delivery are the hallmarks of the Speed 3 Motor from Sloting Plus. With 21500 RPM, 340g of torque, and powered at 12V, it offers usable performance throughout the acceleration range, ideal for those seeking real progression on track.

Llanta Aluminio 17,8x10mm. Lightweight Eje 3/32

1/32 spare parts

Aluminium Wheel 17.8x10mm. Lightweight Axle 3/32

Fabricante: Scaleauto

Ref: SC-4078F25

€8.48

Ultra-lightweight aluminium wheel from Scaleauto, with dimensions 17.8x10mm and designed for 3/32 axle. Designed for those looking to reduce unsprung mass and gain track response without sacrificing mounting precision.

Chasis 3DP P-963 Hypercar GTP de Sc Soporte Motor RT4

Out-of-Stock

Chassis

3DP Chassis P-963 Hypercar GTP by Sc Motor Support RT4

Fabricante: Scaleauto

Ref: CCS-9123B13M

€17.83

SLS 3D printed chassis for the Scaleauto Porsche 963 Hypercar GTP, in a limited edition for the 24h MasterSlot 2024. Designed for the RT4 motor mount at 12°, with the minimum possible weight and lateral body supports in carbon fibre.

View

Chasis 3DP P-9x8 Hypercar de Scaleauto para Soporte Motor RT4

Out-of-Stock

Chassis

Scaleauto 3DP P-9x8 Hypercar chassis for RT4 Motor Mount

Fabricante: Scaleauto

Ref: CCS-9123B15M

€17.83

Exclusive limited edition for the 24h MasterSlot 2024: the P-9x8 Hypercar chassis from Scaleauto combines SLS 3D printing with carbon fibre body supports for the minimum possible weight. Designed for the RT4 motor mount at 12º and all models of the Peugeot Hypercar.

View

Chasis 3DP Caddy Hypercar LMDH de Sc RT4

Chassis

3DP Chassis Caddy Hypercar LMDH by Sc RT4

Fabricante: Scaleauto

Ref: CCS-9123B16M

€17.96

Chassis manufactured using SLS 3D printing in a limited edition for the 24h MasterSlot 2024. Specifically designed for the Scaleauto RT4 motor mount at 12° and all models of the Cadillac Hypercar LMDH, with lateral body supports in carbon fibre and the minimum possible weight.

BF Porsche 991.2 GT3 24h Daytona 2019 n911- RS

On sale!

Out-of-Stock

Modern GT

BF Porsche 991.2 GT3 24h Daytona 2019 n911- RS

Fabricante: Scaleauto

Ref: SC-6246RS

€86.72

The Porsche 991.2 GT3 that competed in the 24h of Daytona 2019 with the n°911, recreated by Scaleauto in RS version with a 21,500 rpm motor in anglewinder configuration, AS25 tyres, adjustable guide, and medium grey composite chassis. Ready to run and prepared for fine-tuning to the millimetre.

View

Piñón 10d. Laton ø5,5mm para eje de 2mm.

Bronze

10-tooth brass pinion ø5.5mm for 2mm shaft

Fabricante: Scaleauto

Ref: SC-1093A55

€2.95

Brass pinion with 10 teeth and an outer diameter of 5.5 mm, designed for 2 mm shafts. Manufactured by Scaleauto (ref. SC-1093A55), it is equivalent to the SI-PI10 and fits perfectly in transmission setups that demand accuracy and reliability.

Out-of-Stock

Herramientas

Masking tape 2mm x 18m

Fabricante: Scaleauto

Ref: SC-9510l

€1.86

When every millimetre counts, the Scaleauto 2 mm x 18 m masking tape gives you the control you need to paint fine lines, stripes, and curves with complete cleanliness, without bleeding or irregular edges.

View

Herramientas

Masking tape 3mm x 18m

Fabricante: Scaleauto

Ref: SC-9510A

€1.86

Scaleauto 3 mm wide masking tape, 18 m long, designed to achieve sharp edges when painting and decorating slot car bodies. An essential workshop accessory for those who pay attention to the details of their paintwork.

Out-of-Stock

Pulleys

13T GEAR PULLEY 1.8mm 2.38mm blue

Fabricante: Scaleauto

Ref: SC-1723A

€5.75

Scaleauto 13-tooth pinion, belt pitch 1.8 mm and shaft diameter 2.38 mm, in blue. Transmission part designed to provide a clean and slip-free power transfer in belt configurations for slot cars.

View

Piñón 10d. M50 Latón para Eje Motor 1.5mm di 6mm

1/32 spare parts

10d Pinion M50 Brass for 1.5mm Motor Shaft di 6mm

Fabricante: Scaleauto

Ref: SC-1297

€3.02

Scaleauto SC-1297 brass pinion with 10 teeth, module 50, designed for a 1.5 mm motor shaft with an outer diameter of 6 mm. An essential part to keep the transmission in check and fine-tune the gear ratio of your slot car.

Piñón 8d. M50 Latón para Eje Motor 1.5mm. d 5.5mm

1/32 spare parts

8d Pinion M50 Brass for 1.5mm Motor Shaft. d 5.5mm

Fabricante: Scaleauto

Ref: SC-1295A55

€3.02

8-tooth pinion, module 50, made of brass by Scaleauto. Specifically designed for 1.5 mm diameter motor shafts, with an outer diameter of 5.5 mm. A precision transmission component for your most demanding slot car setups.

Plastic Chassis

Porsche 991.2 chassis - hard R2.0

Fabricante: Scaleauto

Ref: SC-6665a

€7.43

Scaleauto chassis for Porsche 991.2 in hard version R2.0: a preparation base designed for those seeking stability and consistency on track. Calibrated stiffness for demanding technical circuits and precise driving in championship or advanced practice.

Piñón 8d. M50 Latón para Eje Motor 1.5mm. diam. 5.

1/32 spare parts

8t pinion M50 Brass for 1.5mm motor shaft.

Fabricante: Scaleauto

Ref: SC-1295

€3.02

8-tooth pinion, module 50, made of brass by Scaleauto (SC-1295). Designed for a 1.5 mm motor shaft with an outer diameter of 5.0 mm: the foundation of a reliable and adjustable transmission in any slot configuration.

piñón 10d. M50 poliamida para Eje 1,5mm 5mm diamet

Nylon

10t pinion M50 polyamide for 1.5mm axle 5mm diameter

Fabricante: Scaleauto

Ref: SC-1293

€3.02

10-tooth pinion module 50 made of polyamide by Scaleauto, designed for 1.5 mm axles with a 5 mm outer diameter. Lightweight, precise, and silent: a key component to keep the transmission in top condition and maximise every lap on track.

Out-of-Stock

Herramientas

Pro Evo3 reamer without handle

Fabricante: Scaleauto

Ref: SC-5081F

€21.62

Scaleauto precision tool for fine adjustment of axles and bushings in slot car preparation. The reamer pro Evo3 (SC-5081F) is sold without a handle, designed for those who already have the holder or prefer to assemble it their way.

View

Callaway GT3 Pirelli World challnge 2018 n26 -R Version

Modern GT

Callaway GT3 Pirelli World Challenge 2018 n26 -R Version

Fabricante: Scaleauto

Ref: SC-6350R

€77.60

The Callaway GT3 no. 26 from the 2018 Pirelli World Challenge in R version by Scaleauto: body with great exterior details, complete interior, SC-0011 motor with 20,000 rpm in anglewinder configuration, and display case included. A model that combines aesthetic fidelity and ready-to-run preparation.

Showing 313-336 of 1395 item(s)