Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Magnesium

Wheel 16.2 x 8.5 mm. URANO EVO II

Fabricante: Sloting Plus

Ref: SP022514

€12.72

The natural evolution of the Urano family: magnesium wheel of 16.2 x 8.5 mm. with lightweight inner flank and M2.5 x 2.5 mm. Allen screw for near-perfect balance. Only 0.84 g per unit. Bag with 2 units.

Guide

Pivoting guide arm chassis Raid 90mm

Fabricante: MITOOS

Ref: CXM931.3

€7.95

Original MITOOS spare part for the 90mm Raid chassis. The pivoting arm keeps the guide in continuous contact with the track, preserving stability and electrical pickup. Reference CXM931.3. Chassis not included.

Calcas

Mitoos Decals CLASSIC NUMBERS

Fabricante: MITOOS

Ref: CXM549

€6.00

Mitoos water transfer decal sheet with classic style numbers to decorate your slot cars. 70x100 mm sheet that allows for clean and precise applications on the bodywork.

Calcas

Mitoos Decal CLASSIC LOGOS I

Fabricante: MITOOS

Ref: CXM547

€6.00

Mitoos water transfer decal with a selection of classic logos to customise your models. 70x100 mm sheet ready to apply with water on any prepared surface.

Calcas

Mitoos MARTINI decal

Fabricante: MITOOS

Ref: CXM544

€6.00

Mitoos water transfer decal with MARTINI decoration, ref. CXM544. 70×100 mm sheet ready to apply to your slot models and give them the unmistakable Martini Racing finish with total precision.

Calcas

Mitoos GULF decal

Fabricante: MITOOS

Ref: CXM535

€6.00

Water decal with the unmistakable GULF decoration from Mitoos, on a 70×100 mm sheet. Perfect for giving that authentic and competitive touch to your slot cars or static models.

Nylon

16 Tooth Pinion D. M50 for 2mm axle. Nylon

Fabricante: Sigma

Ref: SG-8509

€1.94

Sigma nylon pinion with 16 teeth and module 50, designed for a 2 mm shaft in 1/32 slot cars. A simple and reliable part that is part of the transmission and directly affects the gear ratio of your setup.

Out-of-Stock

Nylon

14 tooth pinion. M50 p/shaft 2mm. Nylon

Fabricante: Sigma

Ref: SG-8507

€1.94

Sigma nylon pinion with 14 teeth and module 50, designed for 2 mm axles in 1/32 slot cars. A reliable, lightweight transmission component that is easy to assemble to keep your car in top condition for every session.

View

Nylon

12 tooth pinion D. M50 for 2mm axle. Nylon

Fabricante: Sigma

Ref: SG-8505

€2.08

Sigma nylon pinion (ref. SG-8505) with 12 teeth, module 50, designed for a 2 mm shaft. A reliable spare part for 1/32 transmissions seeking smooth operation and a good gear ratio.

Out-of-Stock

Nylon

Pinion 10 D. M50 p/shaft 2mm. Nylon

Fabricante: Sigma

Ref: SG-8503

€2.08

Sigma nylon pinion (ref. SG-8503) with 10 teeth, module 50, and direct mounting on a 2 mm axle. A precise and durable spare part to keep your drivetrain in perfect condition in 1/32 scale.

View

Corona 43 D. M50 p/eje 3mm. New Racing Transversal

Nylon

9-tooth pinion. M50 p/shaft 2mm. Nylon

Fabricante: Sigma

Ref: SG-8502

€2.08

Sigma nylon pinion (ref. SG-8502) with 9 teeth, module 50 and a 2 mm axle hole. A specific and direct spare part to keep the drivetrain of your 1/32 slot cars in perfect working order.

Wheels

BLACK foam strips

Fabricante: Sloting Plus

Ref: SP029961

€2.24

Universal black foam strips from Sloting Plus in a pack of 16 units. Designed for wheels from 12 to 18 mm, they provide easy mounting and a reliable fit that keeps the tyre perfectly bonded to the wheel on track.

Wheels

ORANGE foam strips

Fabricante: Sloting Plus

Ref: SP029960

€2.24

Orange foam strips from Sloting Plus in a pack of 16 units. Universal for wheels with a diameter of 12 to 16 mm, with specific compatibility with the Air System between 15.8 and 16.9 mm. A reliable preparation reference for those who adjust their wheels with precision.

Tornillo M2 x 6 cabeza extra plana PHILLIPS

of motor

M2 x 6 screw extra flat head PHILLIPS

Fabricante: Sloting Plus

Ref: SP158606

€8.80

M2 x 6 screw with extra flat head and PHILLIPS drive from Sloting Plus. Precision spare part for securing motor components in 1/32 slot cars, with a low profile that ensures a clean assembly without interference.

Braids

1 metre of 3x0.4mm copper braid

Fabricante: MITOOS

Ref: CXM171R

€3.92

One metre of high conductivity red copper braid for 1/32 slot car spares. Supplied uncut, so you can adapt it exactly to the length you need for each assembly.

Motors

Motor Speed 5 21000RPM 300g 12V

Fabricante: Sloting Plus

Ref: SP090005

€12.00

Sloting Plus long can motor with balanced rotor, 21000 RPM and 300 g.cm of torque at 12V. Soft magnetic field (approx. 3-4 UMS) and only 32 g in weight: a highly valued combination in competition setups where response precision makes the difference.

Out-of-Stock

1/24 Spare Parts

Crown 43 D. M50 p/axle 3mm. New Racing Transversal

Fabricante: Sigma

Ref: SG-854243

€4.48

Sigma crown gear with 43 teeth, module 50 and 3 mm shaft, designed for sidewinder configuration mounts in 1/24 scale. A precise and reliable transmission spare part to adjust your gear ratio and achieve maximum performance on track.

View

Corona 42 D. M50 p/eje 3mm. New Racing Transversal

1/24 Spare Parts

Crown 42 D. M50 p/axle 3mm. New Racing Transversal

Fabricante: Sigma

Ref: SG-854242

€4.48

42-tooth crown gear, module 50 and 3 mm shaft from Sigma, designed for sidewinder setups in 1/24 scale. A key component in the transmission of your slot car when you are looking for a long gear ratio and smooth rolling.

Corona 41 D. M50 p/eje 3mm. New Racing Transversal

Out-of-Stock

1/24 Spare Parts

Crown 41 D. M50 p/axle 3mm. New Racing Transversal

Fabricante: Sigma

Ref: SG-854241

€4.48

Sigma crown gear with 41 teeth, module 50, designed for a 3 mm axle in New Racing transverse configuration. A reliable transmission spare part to adjust the gear ratio in your 1/32 and 1/24 slot car setups.

View

prensa-extractor-universal-piñones-sloting-plus-sp140008.jpg

Herramientas

UNIVERSAL press and extractor for Sloting Plus pinions SP140008

Fabricante: Sloting Plus

Ref: SP140008

€43.20

Universal press and extractor from Sloting Plus for fitting and removing pinions without damaging either the pinion or the axle. Factory set for 2 mm axles and adaptable to 1.5 mm, it works in all scales: 1/43, 1/32, 1/28, and 1/24. Compact, robust, and designed to last a lifetime in the workshop.

Rear

Tyres x4 S0.1

Fabricante: MITOOS

Ref: CXM002-B

€6.00

Four S0.1 tyres from Mitoos (ref. CXM002-B) for the rear axle in 1/32 scale. Direct replacement to maintain the grip and performance of your slot car without complications.

80 TORNILLOS M2x6mm Cabeza extra plana Torx T6

of motor

M2 x 4 extra flat head Phillips screw x100

Fabricante: Sloting Plus

Ref: SP158604

€8.80

Pack of 100 M2 x 4 screws with extra flat head and Phillips drive from Sloting Plus. An essential basic in any 1/32 slot preparation bench, for clean and low-profile fixings where space is critical.

Braids

Rally braid roll 0.23mm (without spring effect)

Fabricante: MITOOS

Ref: M-TC001

€2.51

MITOOS 0.23 mm rally braid without spring effect, designed for those seeking a smooth electrical contact without forced return in their 1/32 slot cars. A simple replacement that can make a real difference in the vehicle's response.

Wheel covers

TYPE-3 FOAM KIT

Fabricante: Sloting Plus

Ref: SP029953

€2.24

Foam rings designed by Sloting Plus for the UFO-Universal, UFO-R wheels and double flange Air System type wheels from other brands. A direct solution to maintain grip and track performance at the highest level.

Showing 25-48 of 663 item(s)