M2 x 6 screw extra flat head PHILLIPS

Small in size, key in assembly: the M2 x 6 extra-flat head PHILLIPS screw from Sloting Plus

In the preparation of a slot car, the fastening details make the difference between a well-assembled set and one that loses adjustment during a race. The SP158606 screw from Sloting Plus meets this need exactly: M2 metric, 6 mm length, and extra-flat head with PHILLIPS drive, designed for applications where space is limited and the screw profile cannot protrude.

Function and performance

The extra-flat head of this screw allows it to be integrated into areas with limited vertical clearance, common in the fastening of motor components and mounts in 1/32 cars. The PHILLIPS drive facilitates controlled tightening without the risk of slipping under load, essential when working with small-format parts and precision screwdrivers.

• Metric: M2
• Length: 6 mm
• Head: extra-flat
• Drive: PHILLIPS (cross)
• Category: Motor spares for 1/32 scale
• Brand: Sloting Plus

Assembly and preparation

For optimal tightening, use a precision PHILLIPS screwdriver of the appropriate size for the M2 pitch —typically PH000 or PH00— and apply the correct torque: the extra-flat head has a smaller contact area than a conventional head, so excessive force can mark the housing. If the screw needs to be fixed onto plastic or machined aluminium, consider using a small drop of low-strength thread locker to prevent it from vibrating loose during operation without compromising future disassembly.

Compatibilities

As it is a standard M2 metric screw, it is compatible with any M2 threaded housing present in chassis, mounts, and motor supports of 1/32 scale that specify this diameter and pitch. Always check the documentation of your Sloting Plus kit or spare part to confirm the recommended length before replacing or restocking.

Common mistakes

• Confusing the length: a screw longer than necessary can interfere with the motor rotor or internal wiring.
• Using a worn or incorrectly sized screwdriver, which damages the PHILLIPS drive and complicates future disassembly.
• Over-tightening on plastic housings, which can crack under the torque of an M2 metric if the wall is thin.

Frequently asked questions

What does "extra-flat head" mean in an M2 screw?

An extra-flat head has a lower profile than the standard countersunk head. This allows it to sit almost flush with the surface or even recessed in a shallow housing, without protruding and causing interference with adjacent parts.

What screwdriver do I need for the PHILLIPS drive of this screw?

For an M2 metric screw with an extra-flat head, the usual choice is a precision PHILLIPS screwdriver PH000 or PH00. Always use a tip in good condition to avoid damaging the drive.

Can I use this screw in other scales besides 1/32?

As long as the housing is an M2 thread and the 6 mm length is suitable for the part, this screw can be used in any scale or modelling application that requires it. The 1/32 scale is the catalogue category to which this spare part belongs within the Sloting Plus range.

Is it advisable to use thread locker with this screw?

It depends on the application. In assemblies subject to constant vibration, a small amount of low-strength thread locker helps maintain the tightness. If you anticipate frequent disassembly for adjustment, forgo it or use a minimal amount.

How many units does the SP158606 item include?

The available information does not specify the number of units per reference. We recommend checking it directly on the product sheet or contacting us before placing the order.

The Sloting Plus SP158606 is an M2 x 6 mm extra-flat head Phillips screw designed for 1/32 scale slot car motor assembly and repair. Its low-profile head makes it ideal for tight-clearance applications in motor mounts and chassis components. A precision spare part for slot car enthusiasts, club racers and scale modellers looking for reliable, OEM-compatible hardware from Sloting Plus.