Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

3D chassis, Fibre, Metal..

Peugeot 208 Block-R AW 0.5 EVO3 chassis compatible with Scaleauto

Fabricante: Tectime

Ref: M-106413

€15.92

Tectime chassis for Peugeot 208 in Anglewinder configuration with Block-R EVO3 geometry and 0.5 mm offset. Made from high-tech polymer, it offers the ideal balance between torsion and rigidity for 1/32 slot racing. Compatible with Scaleauto models.

Out-of-Stock

Magnesium

Wheel 15.9 x 8.5 mm. URANO EVO II

Fabricante: Sloting Plus

Ref: SP022510

€12.75

Urano EVO II wheels from Sloting Plus in dimensions 15.9 x 8.5 mm. Machined from technical aluminium by CNC with minimal tolerances, they offer perfect centring, lightweight core, and M2.5 set screw. Set of 2 units designed for those competing in 1/32 categories where every tenth of a gram matters.

View

Magnesium

URANO EVO II wheel 16.5 x 10 mm

Fabricante: Sloting Plus

Ref: SP022520

€12.75

Two Sloting Plus Urano EVO II wheels of 16.5 x 10 mm in lightweight technical aluminium, CNC machined for perfect concentricity. Fixed by M2.5 set screw and compatible with 2.38 mm (3/32") axles. A solid reference for competition setups in 1/32.

Lexan velocidad P.9x8 LMH (comp. Scaleauto)

Lexan Interior

NSR compatible C8R speed Lexan

Fabricante: Tectime

Ref: M-L14V

€2.40

Competition lexan interior manufactured by Tectime for NSR Corvette C8R bodies. Designed for speed disciplines, its ultra-lightweight design reduces weight and lowers the centre of gravity, improving stability in the fastest corners.

Lexan Skoda Fabia Rally2 compatible Scaleauto

Lexan Interior

Lexan rally Sierra compatible with Avant Slot

Fabricante: Tectime

Ref: M-L0077R

€2.40

Vacuum-formed lexan interior (cockpit) for Ford Sierra rally, compatible with Avant Slot models. It drastically reduces weight compared to the original injected plastic, decreases the inertia of the body and improves the car's response in direction changes. Reference Tectime M-L0077R.

Lexan Interior

Scaleauto compatible Lexan Skoda Fabia Rally2

Fabricante: Tectime

Ref: M-L0076R

€2.40

Vacuum formed lexan interior specifically for the Skoda Fabia Rally2, compatible with Scaleauto (ref. M-L0076R). Reduces weight in the upper area of the car, lowers the centre of gravity, and improves cornering stability without sacrificing the realism of the rally cockpit.

Lexan Interior

Scaleauto compatible Lexan Skoda Fabia R5

Fabricante: Tectime

Ref: M-L0075R

€2.50

Thermoformed lexan interior specifically for the Skoda Fabia R5 in 1/32 scale, compatible with Scaleauto bodies. Part of the Tectime line that reduces the weight of the assembly and helps lower the centre of gravity, with a detailed finish and ideal flexibility for rally slot racing.

Skoda Fabia R5 Block AW R 0.5 EVO3 compatible con Scaleauto

Out-of-Stock

3D chassis, Fibre, Metal..

Fabia Rally 2 AW-R 0.5 EVO3 chassis

Fabricante: Tectime

Ref: M-107613

€13.50

Tectime competition chassis for the Fabia Rally 2 in Anglewinder configuration with all-wheel drive and AFR (Active Front Rail) system. The EVO3 evolution with 0.5 mm offset improves cornering stability and accommodates wheels from 16.2 mm. Chassis only, without body.

View

Chasis Toyota Yaris WRC1 AW-R 0.5 EVO3 para Avant Slot

Out-of-Stock

3D chassis, Fibre, Metal..

Skoda Fabia R5 Block AW R 0.5 EVO3 compatible with Scaleauto

Fabricante: Tectime

Ref: M-107513

€13.50

High competition chassis Tectime M-107513 in EVO3 polymer for the Scaleauto Skoda Fabia R5 body. AW-R 0.5 geometry with Anglewinder position, total traction AFR system, and compatibility with wheels from 16.2 mm. Body not included.

View

3D chassis, Fibre, Metal..

Toyota Yaris WRC1 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime

Ref: M-107313

€15.62

The Mustang Slot Design M-107313 chassis in EVO3 version is specifically designed for the Avant Slot Toyota Yaris WRC1 body. AW-R 0.5 geometry with the motor in Anglewinder position, high-tech flexible polymer, and compatibility with wheels from 16.2 mm. Chassis only, without body.

Out-of-Stock

3D chassis, Fibre, Metal..

Toyota Yaris WRC2 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime

Ref: M-107213

€15.92

The M-107213 chassis from Mustang Slot Design in EVO3 version takes your Avant Slot Toyota Yaris WRC2 to the next competitive level. Anglewinder R 0.5 configuration, high-performance polymer, and compatibility with wheels from 16.2 mm for a low profile and outstanding stability on the most demanding stages.

View

1/32 spare parts

3D cover for bearing

Fabricante: Sloting Plus

Ref: SP399920

€1.28

Secure and protect the rear axle bearings with this cap made from technical plastic using 3D printing. The kit includes 2 units and complete screws for assembly. Compatible with most Sloting Plus motor mounts.

Controllers and power supplies

PRO R-II controller for Two Fingers

Fabricante: Sloting Plus

Ref: SP130039

€198.00

Redesigned trigger for two fingers, new high-speed microcontroller and protected front curve selector: the PRO R-II from Sloting Plus takes the electronic control of your slot car to another level, both in tight corners and on fast tracks.

Controllers and power supplies

PRO R-II one-finger controller

Fabricante: Sloting Plus

Ref: SP130038

€198.00

The Sloting Plus PRO R-II takes electronic control to the next level: new software, improved sensor, and redesigned trigger for one finger. Greater smoothness in medium and wide radius corners, re-tuned traction, and the characteristic "kick" of the PRO controllers. An evolution designed for the demanding driver.

Out-of-Stock

Controllers and power supplies

Lite-Evo 100% electronic controller

Fabricante: Sloting Plus

Ref: SP130021

€99.00

The Lite-Evo from Sloting Plus is the 100% electronic controller designed for those starting in slot racing without compromising on performance. With 8 power curves, 4 braking levels, and a magnetic trigger, it offers precise, intuitive control adaptable to any track between 8 V and 22 V.

View

Magnesium

URANO EVO II TYRE 16.2×10 mm

Fabricante: Sloting Plus

Ref: SP022516

€12.75

Sloting Plus Urano EVO II wheels with a diameter of 16.2 mm and a width of 10 mm, made from lightweight technical aluminium with CNC machining. Perfect concentricity, secured by an M2.5 set screw, and compatible with 2.38 mm (3/32") axles. A reference spare part for demanding competition setups.

Modern Rally

Advance Audi S1 WRC Monster

Fabricante: Scalextric

Ref: U10329S300M

€57.95

The Scalextric Advance Audi S1 WRC Monster Energy arrives with complete digital technology: wireless control, lane changing, high-revving motor, and front and rear LED lights. A 1:32 replica of the rallycross circuits that will not leave any enthusiast indifferent.

Modern Rally

Advance Audi S1 WRC Sonax

Fabricante: Scalextric

Ref: U10329S300S

€30.00

The Audi S1 WRC with official Sonax livery is integrated into the Scalextric Advance system to offer real digital racing: strategic lane changes, LED lights, and immediate response to wireless controllers. A modern rally slot car designed for those looking to make the leap to digital.

Skoda Fabia WRC2 - Cohete Suárez Mud Effect

Out-of-Stock

Modern Rally

Skoda Fabia WRC2 - Pepe López

Fabricante: Scalextric

Ref: u10566s300

€57.95

The Skoda Fabia WRC2 of Pepe López and D. Vázquez at the 2024 Monte Carlo Rally, reproduced by Scalextric in 1/32 scale. Analog system convertible to Scalextric Advance, with included lights and 4x4 traction.

View

Allen and Torx screw

M2.5 x 2 Allen screw

Fabricante: Sloting Plus

Ref: SP152500

€5.12

M2.5 x 2 mm steel Allen screw from Sloting Plus for 1/32 slot wheels. Requires a 1.3 mm Allen key or bit and is sold in a pack of 20 units. Greater durability and tightening strength than conventional screws.

Controllers and power supplies

Trigger for PRO R-II controller (two fingers)

Fabricante: Sloting Plus

Ref: SP138915

€12.80

Replacement trigger for the PRO R-II controller from Sloting Plus, specifically designed for use with two fingers. Original reference SP138915 that ensures a perfect replacement and restores the controller's usual feel and response.

Controllers and power supplies

Trigger for PRO R-II controller (one finger)

Fabricante: Sloting Plus

Ref: SP138914

€12.80

Spare 3D printed plastic trigger for the Sloting Plus PRO R-II controller (one finger). Thanks to its material, it can be sanded and trimmed within certain limits to adapt to the morphology and grip style of each driver.

Magnesium

Wheel 16.2 x 8.5 mm. URANO EVO II

Fabricante: Sloting Plus

Ref: SP022514

€12.72

The natural evolution of the Urano family: magnesium wheel of 16.2 x 8.5 mm. with lightweight inner flank and M2.5 x 2.5 mm. Allen screw for near-perfect balance. Only 0.84 g per unit. Bag with 2 units.

Guide

Pivoting guide arm chassis Raid 90mm

Fabricante: MITOOS

Ref: CXM931.3

€7.95

Original MITOOS spare part for the 90mm Raid chassis. The pivoting arm keeps the guide in continuous contact with the track, preserving stability and electrical pickup. Reference CXM931.3. Chassis not included.

Showing 25-48 of 891 item(s)