Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Lexan Skoda Fabia Rally2 compatible Scaleauto

Lexan Interior

Lexan rally Sierra compatible with Avant Slot

Fabricante: Tectime

Ref: M-L0077R

€2.40

Vacuum-formed lexan interior (cockpit) for Ford Sierra rally, compatible with Avant Slot models. It drastically reduces weight compared to the original injected plastic, decreases the inertia of the body and improves the car's response in direction changes. Reference Tectime M-L0077R.

Lexan Interior

Scaleauto compatible Lexan Skoda Fabia Rally2

Fabricante: Tectime

Ref: M-L0076R

€2.40

Vacuum formed lexan interior specifically for the Skoda Fabia Rally2, compatible with Scaleauto (ref. M-L0076R). Reduces weight in the upper area of the car, lowers the centre of gravity, and improves cornering stability without sacrificing the realism of the rally cockpit.

Lexan Interior

Scaleauto compatible Lexan Skoda Fabia R5

Fabricante: Tectime

Ref: M-L0075R

€2.50

Thermoformed lexan interior specifically for the Skoda Fabia R5 in 1/32 scale, compatible with Scaleauto bodies. Part of the Tectime line that reduces the weight of the assembly and helps lower the centre of gravity, with a detailed finish and ideal flexibility for rally slot racing.

Skoda Fabia R5 Block AW R 0.5 EVO3 compatible con Scaleauto

Out-of-Stock

3D chassis, Fibre, Metal..

Fabia Rally 2 AW-R 0.5 EVO3 chassis

Fabricante: Tectime

Ref: M-107613

€13.50

Tectime competition chassis for the Fabia Rally 2 in Anglewinder configuration with all-wheel drive and AFR (Active Front Rail) system. The EVO3 evolution with 0.5 mm offset improves cornering stability and accommodates wheels from 16.2 mm. Chassis only, without body.

View

Chasis Toyota Yaris WRC1 AW-R 0.5 EVO3 para Avant Slot

Out-of-Stock

3D chassis, Fibre, Metal..

Skoda Fabia R5 Block AW R 0.5 EVO3 compatible with Scaleauto

Fabricante: Tectime

Ref: M-107513

€13.50

High competition chassis Tectime M-107513 in EVO3 polymer for the Scaleauto Skoda Fabia R5 body. AW-R 0.5 geometry with Anglewinder position, total traction AFR system, and compatibility with wheels from 16.2 mm. Body not included.

View

3D chassis, Fibre, Metal..

Toyota Yaris WRC1 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime

Ref: M-107313

€15.62

The Mustang Slot Design M-107313 chassis in EVO3 version is specifically designed for the Avant Slot Toyota Yaris WRC1 body. AW-R 0.5 geometry with the motor in Anglewinder position, high-tech flexible polymer, and compatibility with wheels from 16.2 mm. Chassis only, without body.

Out-of-Stock

3D chassis, Fibre, Metal..

Toyota Yaris WRC2 AW-R 0.5 EVO3 chassis for Avant Slot

Fabricante: Tectime

Ref: M-107213

€15.92

The M-107213 chassis from Mustang Slot Design in EVO3 version takes your Avant Slot Toyota Yaris WRC2 to the next competitive level. Anglewinder R 0.5 configuration, high-performance polymer, and compatibility with wheels from 16.2 mm for a low profile and outstanding stability on the most demanding stages.

View

1/32 spare parts

3D cover for bearing

Fabricante: Sloting Plus

Ref: SP399920

€1.28

Secure and protect the rear axle bearings with this cap made from technical plastic using 3D printing. The kit includes 2 units and complete screws for assembly. Compatible with most Sloting Plus motor mounts.

Controllers and power supplies

PRO R-II controller for Two Fingers

Fabricante: Sloting Plus

Ref: SP130039

€198.00

Redesigned trigger for two fingers, new high-speed microcontroller and protected front curve selector: the PRO R-II from Sloting Plus takes the electronic control of your slot car to another level, both in tight corners and on fast tracks.

Controllers and power supplies

PRO R-II one-finger controller

Fabricante: Sloting Plus

Ref: SP130038

€198.00

The Sloting Plus PRO R-II takes electronic control to the next level: new software, improved sensor, and redesigned trigger for one finger. Greater smoothness in medium and wide radius corners, re-tuned traction, and the characteristic "kick" of the PRO controllers. An evolution designed for the demanding driver.

Out-of-Stock

Controllers and power supplies

Lite-Evo 100% electronic controller

Fabricante: Sloting Plus

Ref: SP130021

€99.00

The Lite-Evo from Sloting Plus is the 100% electronic controller designed for those starting in slot racing without compromising on performance. With 8 power curves, 4 braking levels, and a magnetic trigger, it offers precise, intuitive control adaptable to any track between 8 V and 22 V.

View

Magnesium

URANO EVO II TYRE 16.2×10 mm

Fabricante: Sloting Plus

Ref: SP022516

€12.75

Sloting Plus Urano EVO II wheels with a diameter of 16.2 mm and a width of 10 mm, made from lightweight technical aluminium with CNC machining. Perfect concentricity, secured by an M2.5 set screw, and compatible with 2.38 mm (3/32") axles. A reference spare part for demanding competition setups.

Allen and Torx screw

M2.5 x 2 Allen screw

Fabricante: Sloting Plus

Ref: SP152500

€5.12

M2.5 x 2 mm steel Allen screw from Sloting Plus for 1/32 slot wheels. Requires a 1.3 mm Allen key or bit and is sold in a pack of 20 units. Greater durability and tightening strength than conventional screws.

Controllers and power supplies

Trigger for PRO R-II controller (two fingers)

Fabricante: Sloting Plus

Ref: SP138915

€12.80

Replacement trigger for the PRO R-II controller from Sloting Plus, specifically designed for use with two fingers. Original reference SP138915 that ensures a perfect replacement and restores the controller's usual feel and response.

Controllers and power supplies

Trigger for PRO R-II controller (one finger)

Fabricante: Sloting Plus

Ref: SP138914

€12.80

Spare 3D printed plastic trigger for the Sloting Plus PRO R-II controller (one finger). Thanks to its material, it can be sanded and trimmed within certain limits to adapt to the morphology and grip style of each driver.

Magnesium

Wheel 16.2 x 8.5 mm. URANO EVO II

Fabricante: Sloting Plus

Ref: SP022514

€12.72

The natural evolution of the Urano family: magnesium wheel of 16.2 x 8.5 mm. with lightweight inner flank and M2.5 x 2.5 mm. Allen screw for near-perfect balance. Only 0.84 g per unit. Bag with 2 units.

Guide

Pivoting guide arm chassis Raid 90mm

Fabricante: MITOOS

Ref: CXM931.3

€7.95

Original MITOOS spare part for the 90mm Raid chassis. The pivoting arm keeps the guide in continuous contact with the track, preserving stability and electrical pickup. Reference CXM931.3. Chassis not included.

Broca de bricolaje slot y modelismo 2,5mm

Herramientas

Drill for reworking crowns, wheels and bearings. Pitch 2.38 (3/32 mm)

Fabricante: Tectime

Ref: TT060

€3.02

Tectime workshop drill (ref. TT060) with a pitch of 2.38 mm (3/32) designed for precisely reworking crowns, wheels, and bearings in slot car preparation and modelling tasks. A specific tool for a specific job: clean and damage-free adjustment on each piece.

Calcas

Mitoos Decals CLASSIC NUMBERS

Fabricante: MITOOS

Ref: CXM549

€6.00

Mitoos water transfer decal sheet with classic style numbers to decorate your slot cars. 70x100 mm sheet that allows for clean and precise applications on the bodywork.

Calcas

Mitoos Decal CLASSIC LOGOS I

Fabricante: MITOOS

Ref: CXM547

€6.00

Mitoos water transfer decal with a selection of classic logos to customise your models. 70x100 mm sheet ready to apply with water on any prepared surface.

Calcas

Mitoos MARTINI decal

Fabricante: MITOOS

Ref: CXM544

€6.00

Mitoos water transfer decal with MARTINI decoration, ref. CXM544. 70×100 mm sheet ready to apply to your slot models and give them the unmistakable Martini Racing finish with total precision.

Calcas

Mitoos GULF decal

Fabricante: MITOOS

Ref: CXM535

€6.00

Water decal with the unmistakable GULF decoration from Mitoos, on a 70×100 mm sheet. Perfect for giving that authentic and competitive touch to your slot cars or static models.

Chasis 208 WRC/WRX lineal compatible Scaleauto

3D chassis, Fibre, Metal..

Scaleauto compatible linear chassis 208 WRC/WRX

Fabricante: Tectime

Ref: K/004R

€9.90

Linear chassis from Kat Racing (ref. K/004R) specifically designed for Peugeot 208 WRC/WRX bodies in 1/32 scale, with direct compatibility with Scaleauto mechanics. A tuning solution aimed at those looking to refine track performance with precision parts.

Muelle suspension dureza media- corto ø mediano

For bench

Medium hardness suspension spring - short ø medium

Fabricante: Tectime

Ref: TT925

€2.09

Tectime bench spare for fine adjustment of the suspension in 1/32 slot cars. The TT925 offers medium hardness in a short format and medium diameter, and is presented in a pack of 4 units so you always have material available at the workbench.

Showing 25-48 of 861 item(s)