Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Bearings

2 Aluminium brass lip bearings

Fabricante: MITOOS

Ref: CXM184

€1.84

Two brass bearings with a lip and aluminium core designed to reduce friction on the axle and ensure precise and stable turning in your slot car setups. A solid solution for those who fine-tune every detail of the running gear.

Out-of-Stock

Bearings

2 Double lip brass bearings

Fabricante: MITOOS

Ref: CXM183

€1.84

Pack of 2 double-lipped brass bearings, reference CXM183, designed to ensure smooth and precise rotation on the axles of your slot cars. Finished in high-precision brass for demanding setups.

View

Out-of-Stock

Bearings

2 Double lip nylon bearings

Fabricante: MITOOS

Ref: CXM182

€1.02

Two nylon bearings with double lip to keep the axle perfectly centred, reduce friction, and prolong the durability of the bearings in your slot car setup.

View

Bearings

2 Nylon side lip bearings

Fabricante: MITOOS

Ref: CXM181

€1.05

Two nylon bearings with side lip ref. CXM181, designed for smooth rotation and a firm fit of the axle in slot cars. A key component in any serious setup.

Bearings

2 Nylon bearings without lip

Fabricante: MITOOS

Ref: CXM180

€1.05

Pack of 2 CXM180 lipless nylon bearings, designed to keep the axle spinning smoothly and without unnecessary friction. A discreet and effective solution for any serious slot car setup.

In Stock

Steel

70mm Steel axles x2

Fabricante: MITOOS

Ref: CXM058

€3.50

High-quality steel axles in size 3/32" (2.38 mm) and 70 mm in length. Precision ground for a smooth and vibration-free rotation. Pack of 2 units ready to assemble.

In Stock

Steel

65mm Ground steel axles x2

Fabricante: MITOOS

Ref: CXM057

€3.50

Pack of 2 high-quality steel axles, length 65 mm and diameter 3/32" (2.38 mm). A solid reference for the preparation and tuning of slot cars that demand precision in the rear end.

Shock absorbers

Evo_A_L Shock Absorber

Fabricante: MITOOS

Ref: CXM159

€6.20

Evo_A_L shock absorber (CXM159) specifically designed for Raid cars, available in pairs. A tuning spare part aimed at those looking to refine the suspension and dynamic behaviour of their car in the demanding conditions of raid.

Shock absorbers

Evo_A_R shock absorber

Fabricante: MITOOS

Ref: CXM158

€7.43

Evo_A_R shock absorber (ref. CXM158), specifically designed for Raid cars. Supplied in pairs, ready to equip your traction with the suspension required for off-road competition.

Shock absorbers

Evo_A_H Shock Absorber

Fabricante: MITOOS

Ref: CXM157

€6.56

Evo_A_H shock absorber (ref. CXM157) specifically designed for Raid cars. It is sold in pairs, ready to equip your setup with competition-level suspension.

Shock absorbers

Evo_L shock absorber

Fabricante: MITOOS

Ref: CXM156

€5.49

The Evo_L Shock Absorber (CXM156) is specifically designed for Raid cars and is supplied in pairs. A key component for maintaining control and stability in the most demanding terrains.

Shock absorbers

Evo_R Shock Absorber

Fabricante: MITOOS

Ref: CXM155

€5.49

Evo_R shock absorber (ref. CXM155) specifically designed for Raid cars, available in pairs. A competition-oriented tuning part that helps improve the stability and dynamic behaviour of your car.

Shock absorbers

Evo_H Shock Absorber

Fabricante: MITOOS

Ref: CXM154

€5.20

The Evo_H Shock Absorber (ref. CXM154) is specifically designed for Raid cars and is supplied in pairs, allowing for consistent tuning on both axles. A key component for maintaining control and stability on demanding terrain.

Cross crowns

36z raid crown gear

Fabricante: MITOOS

Ref: CXM215

€3.95

Specific crown gear for raid chassis with 36 teeth, 19 mm in diameter, made of nylon with an aluminium core and secured by an allen screw. Robustness and precise engagement for demanding competition sessions.

Out-of-Stock

Braids

Braid dispenser

Fabricante: MITOOS

Ref: CXM170

€1.80

Always keep your braid handy and ready to cut to the exact length. This practical plastic dispenser protects the spool, facilitates dispensing, and speeds up the preparation of the car on the bench. The dispenser does not include braid.

View

Terminals

6 thick connectors

Fabricante: MITOOS

Ref: CXM067

€1.65

Pack of six thick brass connectors, designed for 2x4mm guide wire. A solid and easy-to-assemble solution to maintain electrical continuity in your slot car.

Terminals

6 thin connectors

Fabricante: MITOOS

Ref: CXM066

€1.72

Six fine bronze connectors designed for 1.5x4 mm guide wire. A small but essential spare part to maintain the electrical transmission in perfect condition and ensure the car's response on track.

Rear

Tyres x4 S0.1

Fabricante: MITOOS

Ref: CXM000.1

€4.95

Four S0.1 tyres specifically designed for drifting in slot: rounded edges to minimise grip, controlled sliding, and compatibility with wheels up to 15.5 mm. The cleanest option for those who enjoy drifting on track.

Adhesives

Micro Coat Flat

Fabricante: Microscale

Ref: CH64003

€6.50

Water-based acrylic matte finish varnish formulated with flexible and durable resin. It protects the paint, prepares the surface for decals, and maintains the intact matte appearance even after continuous handling.

Adhesives

Micro Coat Gloss

Fabricante: Microscale

Ref: CH64004

€6.50

Water-based acrylic resin gloss varnish, formulated to protect paints and prepare surfaces before applying decals. Flexible, durable and long-lasting, Micro Coat Gloss is the ally of those seeking flawless finishes in static models, figures and dioramas.

Adhesives

Micro Coat Satin

Fabricante: Microscale

Ref: CH64005

€6.50

The Micro Coat Satin is a satin finish varnish based on water-based acrylic, formulated to protect the paint and optimise the result of the decals. Resistant, flexible, and durable, it maintains its impeccable appearance even after intensive handling of the model.

Shock absorbers

4 SMALL BASIC SHOCK ABSORBERS

Fabricante: MITOOS

Ref: CXM166

€6.00

Four Basic dampers in a small format for slot car preparation. A simple and effective solution to improve chassis stability and corner grip.

Shock absorbers

2 ADJUSTABLE SHOCK ABSORBERS BALL JOINT L

Fabricante: MITOOS

Ref: CXM165

€6.16

Pack of 2 adjustable Pro shock absorbers with long ball joint (ref. CXM165) to fine-tune the suspension of your slot car. A key component when every tenth of a second counts on track.

Shock absorbers

2 ADJ. SHOCK ABSORBERS BALL JOINT R

Fabricante: MITOOS

Ref: CXM164

€6.95

Two adjustable Pro dampers with R joint (ref. CXM164) to take your slot car's suspension to the next level. Precise adjustment, consistent response, and real improvement in track behaviour.

Showing 553-576 of 683 item(s)