Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Set de tornillos Scaleauto M2 de 6mm con cabeza ancha azul.

Out-of-Stock

For bench

Screws for 6mm Bodies with 4.3mm Head (M2)

Fabricante: Scaleauto

Ref: SC-5138B

€4.00

M2 metric screws of 6mm with an oversized head of 4.3mm in blue anodised finish from Scaleauto. Designed for precise adjustment of body tilt on competition slot car chassis, with a wide bearing surface that prevents the screw from slipping through the chassis hole.

View

Vista Chasis 3DP LB Super Trofeo Evo 2 para Soporte Motor RT4

3D chassis, Fibre, Metal..

3DP Chassis LB Super Trofeo Evo 2 for RT4 Motor Mount

Fabricante: Scaleauto

Ref: SC-9123B20

€14.32

Chassis manufactured using SLS 3D printing (laser sintered polyamide) designed by Scaleauto for the LB Super Trofeo Evo 2. Optimised for the RT4 motor mount at 12°, it combines ultra-thin walls, vibration absorption, and precision anchoring points to maximise performance on track.

Vista superior de las cuatro rectas estándar Pro Track Scaleauto SC-10001.

Out-of-Stock

Circuits

Standard Straight 400mm Pro Track (4 units)

Fabricante: Scaleauto

Ref: SC-10001

€47.92

Four standard 400mm Pro Track straight sections from Scaleauto to build or expand speed sections with guaranteed conductivity, grip, and precision in fitting. The foundation on which the best tracks are built.

View

Soporte motor 3D Sloting Plus SP610107 compatible con NSR OFFSET 1 mm.

Benches

3D motor mount compatible with NSR OFFSET 1 mm. SP610107

Fabricante: Sloting Plus

Ref: SP610107

€6.72

3D motor mount from Sloting Plus with a 1 mm offset, monoblock construction and full compatibility with NSR mounts. It lowers the centre of gravity of the chassis and accommodates ball or brass bearings from the Compi Plus range.

Soporte motor 3D Sloting Plus SP610105 compatible con NSR OFFSET 0,50 mm.

Benches

NSR compatible 3D motor mount OFFSET 0.50 mm. SP610105

Fabricante: Sloting Plus

Ref: SP610105

€6.72

Monoblock motor mount manufactured in 3D by Sloting Plus, with an offset of 0.50 mm and full compatibility with NSR type anglewinder mounts. It accepts ball bearings or brass bushings and provides structural rigidity to enhance chassis stability on track.

AW RT3 Motor Mount Offset 0.0mm Hard (Red) SC-6542

In Stock

Anglewinder

AW RT3 Motor Mount Offset 0.0mm hard (red)

Fabricante: Scaleauto

Ref: SC-6542

€9.52

Scaleauto anglewinder bracket for RT3 chassis in Hard hardness —red colour— with offset 0.0mm. Maintains the motor-axle geometry completely stable under any load, providing a linear and balanced traction response for demanding 1/32 slot racing.

Out-of-Stock

1/32 spare parts

M2.5x3mm Allen screw for wheels, stoppers and crown gears SC-5137

Fabricante: Scaleauto

Ref: SC-5137

€1.92

The SC-5137 is the M2.5x3mm Allen screw from Scaleauto designed to secure wheels, stoppers, and crown gears onto 2.38mm axles. Made of high-strength steel, it features an exact M2.5 thread and a compact hexagonal head that does not interfere with the chassis. A small spare part with a decisive role in the reliability of the rear end.

View

llanta-aluminio-scaleauto-16-9x8-5mm-lightweight-SC-4048F25.jpg

Aluminium

Aluminium Wheel 16.9x8.5mm. Lightweight for Axles 2.38mm

Fabricante: Scaleauto

Ref: SC-4048F25

€6.72

Scaleauto machined aluminium wheel in Lightweight format (1.15g), with dimensions 16.9x8.5mm and M2.5 screw fixation. Designed for 2.38mm axles, it reduces rotational mass and improves acceleration and cornering response in 1/32 slot racing.

Motors

Scaleauto SC-18 Slim Can Motor - 25000 RPM (Shaft 1.5mm)

Fabricante: Scaleauto

Ref: SC-0018B

€10.40

Narrow format and uncompromising performance. The SC-18 from Scaleauto is a Slim Can motor with 25,000 rpm at 12V, torque of 82 gr*cm, 1.5 mm shaft, and sealed end bell. The reference option for chassis that require a narrow motor without sacrificing acceleration or reliability lap after lap.

Out-of-Stock

Classic Rally

Mitsubishi Evo VI OMV Rally Monte Carlo 2000 no.21 Scaleauto 1/32

Fabricante: Scaleauto

Ref: SC-6370R

€87.92

The Mitsubishi Lancer Evo VI from the OMV team that competed in the 2000 Monte Carlo Rally arrives in 1/32 scale with everything needed to hit the track: R2.0 In-Flex chassis, SC-0027 motor with 18,000 rpm, hardened steel axles, and RT compound tyres. A R-Version from Scaleauto ready for club competition from the very start.

View

Out-of-Stock

Anglewinder

AW RT3 Evo Offset Motor Mount -1.15mm extra hard (black)

Fabricante: Scaleauto

Ref: SC-6541

€9.52

Anglewinder Scaleauto RT3 Evo bracket with -1.15 mm offset in Extra Hard (black) hardness. Lowers the centre of gravity, stabilises the pinion-crown gear engagement and minimises torsion under high loads, turning any compatible chassis into a more precise and consistent racing tool.

View

Soporte Motor AW RT3 Offset -0.25mm Extra-Hard (Rojo) de Scaleauto - SC-6537C

In Stock

Anglewinder

AW RT3 Offset Motor Mount -0.25mm

Fabricante: Scaleauto

Ref: SC-6537C

€9.22

Scaleauto RT3 anglewinder motor mount with -0.25 mm offset to fine-tune the distance between pinion and crown gear in your 1/32 slot cars. A small adjustment that can make a difference in transmission and track performance.

soportes-carroceria-acero-scaleauto-sc-8169-lms-gt3.jpg

For bench

Scaleauto LMS GT3 2016 Body Mounts Steel for Chassis SC-8003 (SC-8169)

Fabricante: Scaleauto

Ref: sc-8169

€7.92

Made of steel for the SC-8003 chassis, these LMS GT3 2016 body mounts from Scaleauto ensure a solid connection and precise tilting. An original spare part that makes a difference in demanding bench setups.

Motors

SC-18 motor at 25000rpm

Fabricante: Scaleauto

Ref: SC-0012B

€10.40

Slim Can format, 25,000 rpm at 12V and torque of 82 gr*cm: the SC-18 motor from Scaleauto fits where almost none can, without compromising on power or the stability required for competition. With a sealed endbell and a 1.5 mm shaft, ready to install and run.

Lexan Interior

Lexan interior for LBH Supertrofeo Evo2

Fabricante: Scaleauto

Ref: SC-6687

€4.00

Thermoformed Lexan cockpit for the Scaleauto LBH Supertrofeo Evo2. Reduces weight in the upper part of the car, promotes free tilting of the body and lowers the centre of gravity, with all the necessary space for the Anglewinder mechanics. Reference SC-6687.

Flexible Rubber Wing LMS GT3 1/24 Scaleauto SC-7923I

1/24 bodies

Flexible Rubber Wing for LMS GT3 1/24

Fabricante: Scaleauto

Ref: SC-7923I

€7.92

Flexible technical rubber wing from Scaleauto for LMS GT3 bodies in 1/24 scale. Designed to absorb impacts and immediately return to its original position, eliminating the typical breakages of conventional rigid wings.

Vista lateral detallada del BMW M-Hybrid V8 GTP #24

Modern Le Mans

M-Hybrid GTP Watkins Glen 2023 n24 - Pro Anglewinder RT4

Fabricante: Scaleauto

Ref: SC-6383

€89.52

The BMW M-Hybrid V8 GTP of the BMW M Team RLL in the livery of no. 24 from the 6 Hours of Watkins Glen 2023, recreated by Scaleauto in 1/32 scale. Anglewinder motor SC-0029 at 22,500 rpm, RT4 pod, soft In-flex chassis and RT tyres: competition performance straight out of the box.

Scaleauto SC-6421R Porsche 911 GT3 Herbert 24h Nürburgring

Modern GT

P. 911 (992) GT3 Fat-Turbo Team Herbert Motorsport 24h Nurburgring 2024 n5 - R Version.

Fabricante: Scaleauto

Ref: SC-6421R

€79.92

Official 1/32 scale reproduction of the Porsche 911 (992) GT3 R from the Herbert Motorsport team, number 5, in the 24h of Nürburgring 2024. The R Version from Scaleauto combines a collector's finish with competition mechanics: SC-0011 motor, anglewinder configuration, and aluminium rear wheels.

Coche de slot Porsche 911 RSR 3.0 dorsal 58 Gelo Racing Team

Slot Cars

Porsche 911 RSR 3.0 24h Le Mans 1975 n58 Georg Loos - R Version

Fabricante: Scaleauto

Ref: SC-6121R

€79.95

1/32 scale reproduction of the Porsche 911 RSR 3.0 that Georg Loos entered in the 24h of Le Mans 1975 with the number #58. The R Version from Scaleauto combines historically accurate aesthetics with a factory-prepared anglewinder chassis for club racing.

Vista lateral y frontal 911 RS Gulf #709 Racing colors

Out-of-Stock

Modern GT

Porsche 911 RS Gulf n709 Historical Racing Colours - R Version

Fabricante: Scaleauto

Ref: SC-6123R

€79.92

A Porsche 911 RS with the legendary Gulf Oil livery and race number #709, ready to compete. The R Version from Scaleauto combines a top-level historical decoration with competition mechanics: a 20,000 rpm motor, Anglewinder configuration, and axles with bronze ball bearings to perform from the very first lane.

View

Skoda Fabia R5 Rally Catalunya 2015 Winner n44 - P. Tidemand - R Version

Out-of-Stock

Modern Rally

Skoda Fabia R5 Rally Catalunya 2015 Winner n44 - P. Tidemand - R Version

Fabricante: Scaleauto

Ref: SC-6442R

€87.92

Official 1/32 replica of the Skoda Fabia R5 #44 of Pontus Tidemand, winner of the WRC2 category at the Rally Catalunya 2015. The R Version from Scaleauto features the In-flex R2.0 chassis in soft version, SC-0027 motor at 18,000 rpm, and aluminium rear wheels: a mechanical base ready to be pushed to the limit on track.

View

In Stock

Modern GT

LBH GT3 Supertrofeo Evo2 White Racing Kit - Anglewinder.

Fabricante: Scaleauto

Ref: SC-6426

€60.72

1/32 competition kit with unpainted GT3 Supertrofeo Evo2 body, R2.0 In-flex soft chassis assembled in Anglewinder configuration, SC-0011c motor with 20,000 rpm, RT3 bracket with -1 mm offset, aluminium rear wheels and hardened steel axles. The perfect base for customisation and winning.

In Stock

Body parts

Flexible Rubber Wing for LBH Supertrofeo Evo2

Fabricante: Scaleauto

Ref: SC-3630A22

€6.32

Replacement flexible rubber rear wing from Scaleauto for the LBH Supertrofeo Evo2. It absorbs impacts and returns to its original shape, extending the life of one of the most exposed areas of the body during racing.

Procomp3 Wheel 27.5x13mm Rim ø21 Axle 3mm SC-2421P

Wheels and tyres

Wheel Esp. 27.5x13mm. Procomp3 for 3mm Axle. Rim ø21 and M3 Screw.

Fabricante: Scaleauto

Ref: SC-2421P

€14.50

Complete Scaleauto SC-2421P wheels with Procomp3 foam compound and aluminium rim ø21mm for 3mm axles. Size 27.5x13mm with fixation via M3 screw, designed to perform at the highest level in 1/24 slot racing on wooden or plastic tracks.

Showing 49-72 of 1390 item(s)