Lexan interior for LBH Supertrofeo Evo2

The Lexan interior SC-6687: less weight, more control in every corner with your Supertrofeo Evo2

When the goal is to extract the performance of a 1/32 scale racing car, every gram in the upper part of the chassis counts. This Lexan interior from Scaleauto, reference SC-6687, is specifically designed for the LBH Supertrofeo Evo2 and is one of the first modifications that the most demanding drivers make before hitting the track.

Function and performance

The original injected plastic interior of the Supertrofeo Evo2 has a weight that, although reduced, is located in the highest area of the vehicle. By replacing it with this cockpit made from vacuum-formed Lexan, a significant weight saving is achieved exactly where it matters most: at the top. The direct result is a lower centre of gravity and a body that pivots much more freely and predictably.

• Made from vacuum-formed Lexan, the same material used in professional racing bodies.
• Black colour, clean finish, and precise fit to the silhouette of the LBH Supertrofeo Evo2.
• Tray-style design that leaves the necessary space for the motor and Anglewinder mechanics without interference.
• Includes a simplified driver figure and dashboard, suitable for most club regulations and national competitions.
• Reduces pronounced roll effect in fast corners, providing more stability and consistency from lap to lap.

Compatibility

This interior is designed exclusively for the LBH Supertrofeo Evo2 from Scaleauto. Before installing it, ensure that your model corresponds to this specific version, as Scaleauto has different evolutions of its LBH range and the fitting tolerances are tight.

Installation and preparation

The installation is straightforward: the Lexan interior fits directly into the position of the original. No special tools or modifications to the chassis are required. It is recommended to check for any rubbing with the motor or electronics before closing the body and to verify that the pivoting is completely free from side to side. If desired, it can be touched up with modelling paints — Vallejo or Tamiya work very well on Lexan with a light primer — to personalise the cockpit without adding noticeable weight.

Common mistakes

• Confusing versions of the LBH: make sure your car is the Supertrofeo Evo2, not an earlier or later version with different geometry.
• Not checking the pivoting: after installation, always verify that the body pivots without friction; any rubbing point negates the advantage provided by the Lexan.
• Applying too much paint: if decorating the interior, use thin layers; an excessive paint load negates part of the weight saved.

Frequently asked questions

Is this SC-6687 interior compatible with all LBH models from Scaleauto?

No. It is specifically designed for the LBH Supertrofeo Evo2. Other models in the LBH range may have different geometries, so it is important to confirm the exact version of your car before purchasing.

How much weight is approximately saved with this interior?

We do not have official weight data published by Scaleauto for this specific spare part. The reduction depends on the weight of the original interior of your unit. For an accurate measurement, we recommend weighing both pieces with a precision scale before installation.

Is it necessary to modify the chassis or body to install it?

No. The Lexan interior is designed to fit directly into the position of the original, without the need for cuts or additional adjustments to the chassis or body of the LBH Supertrofeo Evo2.

Does it comply with competition regulations?

It includes a simplified driver figure and dashboard to comply with the technical regulations of most clubs and national championships. In any case, always check the specific regulations of your category before competing.

Can the interior be painted for customization?

Yes. Lexan can be painted with an appropriate primer. Brands like Vallejo or Tamiya provide good results on this material. Apply very thin layers to avoid compromising the weight savings achieved.

Is this spare part suitable for use on Scaleauto Sport track?

Compatibility with the Sport lane or any other track system depends on the car's chassis, not the interior. This component exclusively affects the weight and dynamics of the body of the LBH Supertrofeo Evo2.

The Scaleauto SC-6687 is a vacuum-formed Lexan interior designed for the LBH Supertrofeo Evo2, offering significant weight reduction in the upper section of the 1/32 scale slot car. By lowering the centre of gravity and allowing freer body flex, this lightweight cockpit replacement enhances cornering stability and overall dynamic performance. Compatible with Anglewinder motor configurations, it includes a simplified driver figure and dashboard to meet most club and national competition regulations. A must-have tuning part for serious slot car racers looking to optimize their Scaleauto LBH build.