Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM016

€6.72

Four Raid tyres 25x10 with Traction Plus profile and asymmetrical design aimed at maximising grip in every corner. A solid option for both club sessions and home use with confidence.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM015

€6.72

Four Raid 28x10 tyres with a Squared profile featuring a high square tread, designed to effectively evacuate snow and dirt. The direct option when the terrain demands and grip cannot fail.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM014

€5.82

Four Raid tyres in size 25x10 Squared, designed to perform on dirt, mud, dust, and snow. A direct option when track conditions demand more grip and a profile that does not yield to loose surfaces.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM013

€6.72

Four Raid tyres 28x10 in Rounded profile, specifically designed for muddy and snowy surfaces. A straightforward solution for those who need grip in the most demanding track conditions.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM012

€5.82

Four Raid 25x10 Trail tyres with an asymmetric tread designed specifically for trial enthusiasts. A pack ready to equip your car and tackle the track with greater confidence.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM011

€5.82

Four Needle Peak tyres in size 25x9, specially designed for Raid in dirty track conditions. Large rubber volume to maintain grip where other tyres fail.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM010

€6.72

Four Raid CXM010 tyres in size 23x9 with Needle Peak profile, specially designed for dirt, mud, and snow surfaces. The right choice when the track gets challenging.

In Stock

Rally and Raid

4 RAID tyres

Fabricante: MITOOS

Ref: CXM008

€6.99

Pack of 4 RAID Protrack tyres in size 23x9, specifically designed for dirty tracks. A straightforward option for those seeking real performance in muddy conditions without the hassle of installation.

In Stock

Formula 1

4 F1 tyres

Fabricante: MITOOS

Ref: CXM007

€5.70

Four super soft high grip tyres designed for slot F1 single-seaters. Extra soft compound that maximises corner traction and revitalises your car in every track session.

In Stock

Rally and Raid

4 Needle peak tyres

Fabricante: MITOOS

Ref: CXM006

€6.32

Four Needle Peak tyres (ref. CXM006) designed to perform on dirt and low snow surfaces. A complete set aimed at enthusiasts seeking real grip in low adhesion conditions.

Rear

4 S4 tyres

Fabricante: MITOOS

Ref: CXM004

€6.39

Pack of 4 S4 tyres (ref. CXM004) to improve grip and response of your slot car on track. A direct replacement that makes a difference in corner exit and overall stability.

Rear

4 S3 tyres

Fabricante: MITOOS

Ref: CXM003

€5.48

Four S3 tyres (ref. CXM003) ready to equip your slot car. An essential spare part to maintain grip and consistency on track in every session.

In Stock

Rear

4 S2 tyres

Fabricante: MITOOS

Ref: CXM002

€5.84

Four S2 tyres ready to fit and improve the performance of your slot car. A direct replacement that makes a difference in grip and consistency lap after lap.

In Stock

Rear

4 S1 tyres

Fabricante: MITOOS

Ref: CXM001

€5.84

4 S1 tyres designed for asphalt with high grip. A solid option for those seeking consistent traction and predictable behaviour on track.

Plastic Chassis

Radical SR-9 chassis ver.2

Fabricante: Scaleauto

Ref: SC-6612A2

€6.98

Replacement chassis Radical SR-9 ver.2 in standard hardness (black), reference SC-6612A2 from Scaleauto. A key component to maintain or restore your slot car with the original factory geometry and stiffness.

In Stock

Cable

Silicone wire 0.9mm 2m. Green colour

Fabricante: Scaleauto

Ref: SC-1625

€4.48

Flexible silicone wire of 0.9 mm and 2 metres in green, signed by Scaleauto. Perfect for renewing or customising the electrical wiring of your slot cars with precision and reliability.

RT short suspension kit 2 hard springs and 2 soft springs SC-5128B

In Stock

For bench

RT short suspension kit with 2 hard springs and 2 soft springs

Fabricante: Scaleauto

Ref: SC-5128B

€6.82

The SC-5128B kit includes 4 springs for the short RT suspension —2 hard and 2 soft— and allows you to precisely adjust the chassis response according to the demands of each track and your driving style.

In Stock

Fronts

Zero Grip rubber tyre 17.5x10mm

Fabricante: Scaleauto

Ref: SC-4723

€4.81

Scaleauto Zero Grip rubber tyre in size 17.5x10mm (ref. SC-4723). Designed to provide minimal controlled grip, ideal for tuning setups where the aim is to reduce grip to the maximum and adjust the car's behaviour on track.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X2MM

Fabricante: Scaleauto

Ref: SC-1513

€3.60

Scaleauto adhesive counterweight (SC-1513) measuring 100×50×2 mm to adjust and optimise the weight distribution in your slot car. Easy to cut and place where you need it most to improve track stability.

Coronas en linea

28d In-Line Nylon Crown Gear

Fabricante: Scaleauto

Ref: SC-1114

€7.20

28-tooth nylon crown gear designed for inline setups. Smooth transmission, low noise level, and precise engagement: a key component in the preparation of any slot car drivetrain.

In Stock

Coronas anglewinder

Crown gear 29d. Anglewinder 25° Procomp-R

Fabricante: Scaleauto

Ref: SC-1169R

€5.43

29-tooth crown gear for 25° Anglewinder configuration from Scaleauto's Procomp-R range. Designed for a 2.38 mm axle, with a diameter of 15.8 mm and secured with an M2.5 screw. A reference spare part for precisely preparing and tuning your slot car.

Body shell

DE TOMASO PANTERA GR3 BODY SHELL

Fabricante: Scaleauto

Ref: SC-3609

€26.25

De Tomaso Pantera GR3 body in 1/32 scale, reference SC-3609. A piece that captures the essence of the iconic Italo-American sports car in its racing version, ready to be decorated, customised, and put on track.

General

HOBBY PLIERS 120mm CUTTING

Fabricante: Model Craft

Ref: HDPPL6004

€3.95

120 mm cutting pliers from Model Craft, designed for precision work in modelling, slot and dioramas. A compact and well-balanced tool that is very helpful on the workbench.

General

HOBBY PLIERS 120mm CURVED FLAT

Fabricante: Model Craft

Ref: HDPPL6003

€3.95

120 mm curved flat nose pliers from Model Craft, designed for handling small parts with precision in modelling, slot, figures, and dioramas. A reliable tool for the workshop of any discerning hobbyist.

Showing 1129-1152 of 1153 item(s)