Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Herramientas

Special screw M6 TIP Ø 1.9 mm.

Fabricante: Sloting Plus

Ref: SP140023

€11.44

M6 extractor screw with a tip of Ø 1.9 mm, made of A303 stainless steel, with a 10-year warranty from Sloting Plus. Ideal for extracting pinions with a hole of Ø 1.98/1.99 mm (motor shafts of Ø 2 mm). Total length 44 mm, weight 10 g. Bag with 1 unit.

Belts

MXL belt z54 2mm wide - 1pc

Fabricante: MITOOS

Ref: CXM454

€3.47

MXL timing belt with 54 teeth and 2 mm width, compatible with the entire range of Mitoos toothed pulleys —both plastic and aluminium— to transmit high revolutions without loss of traction. Single unit.

Belts

MXL belt z46 - 2mm - 1pc

Fabricante: MITOOS

Ref: CXM446

€3.47

MXL timing belt with 46 teeth and 2 mm width manufactured by Mitoos. Compatible with the entire range of Mitoos toothed pulleys —both plastic and aluminium— for a slip-free transmission with no loss of traction at high revolutions.

Belts

MXL belt z44 2mm wide - 1pc

Fabricante: MITOOS

Ref: CXM444

€3.47

MXL timing belt with 44 teeth and 2 mm width, designed to fit perfectly with the entire range of Mitoos toothed pulleys —both plastic (M136-M140) and aluminium (M143-M149)— and ensure a clean transmission without loss of traction at high revolutions.

1/32 spare parts

Slot.it 3D suspension bridges

Fabricante: ACSlot

Ref: ACS002A

€2.50

Pack of 5 3D suspension bridges specifically designed for Slot.it chassis. A small component with a significant impact on the dynamic behaviour of the car: precision and reliability from a brand that needs no introduction in slot racing.

Chasis 3D Ferrari 308 GTB AvantSlot anglewinder

3D chassis, Fibre, Metal..

3D Chassis Ferrari 308 GTB AvantSlot anglewinder

Fabricante: ACSlot

Ref: ACS028

€12.00

3D anglewinder chassis from AvantSlot (ref. ACS028) specifically designed for the Ferrari 308 GTB. A tuning piece that provides structural rigidity and an optimised geometry to achieve maximum performance on track.

Chasis 3D Peugeot 207 AvantSlot anglewinder

Out-of-Stock

3D chassis, Fibre, Metal..

3D chassis Peugeot 207 AvantSlot anglewinder

Fabricante: ACSlot

Ref: ACS003

€12.00

3D printed chassis specifically designed for the AvantSlot Peugeot 207 in anglewinder configuration. A solid base to prepare your slot car with precision and gain hundredths where it matters most.

View

Chasis 3D Peugeot 307 Ninco Anglewinder Monoblock

3D chassis, Fibre, Metal..

3D Chassis Peugeot 307 Ninco Anglewinder Monoblock

Fabricante: ACSlot

Ref: ACS004PRO

€15.00

3D printed chassis from ACSlot specifically designed for the Ninco Peugeot 307 in monoblock anglewinder configuration. Made from flexible and lightweight material, it allows for better dynamic performance and paves the way for serious competitive preparation.

Out-of-Stock

Storage

New Controller Case

Fabricante: Sloting Plus

Ref: SP138903

€20.00

Rigid EVA fabric case in black to protect your competition controller from impacts, dust, and moisture. With dimensions of 26×19×6 cm, it is compact, durable, and perfect for taking to the club or circuit with complete peace of mind.

View

Nylon

Fine nylon pinion z10

Fabricante: Sloting Plus

Ref: SP083010

€1.80

Fine (F) nylon pinion Z10 from Sloting Plus, designed to smooth power delivery and braking. Narrower tooth than the standard Z9 model, greater spacing between gears and wide compatibility with market crowns. Pack of 4 units in purple colour.

Motors

Motor Speed 3 21500RPM 340g 12V

Fabricante: Sloting Plus

Ref: SP090003

€12.00

Powerful performance and linear delivery are the hallmarks of the Speed 3 Motor from Sloting Plus. With 21500 RPM, 340g of torque, and powered at 12V, it offers usable performance throughout the acceleration range, ideal for those seeking real progression on track.

Storage

Plastic box 165x75x45 mm

Fabricante: Sloting Plus

Ref: SP999021

€1.60

Thermoformed plastic box with internal dimensions of 165 x 75 x 45 mm, ideal for storing and organising spare parts, tools, and small slot components. Sold in 1 unit.

of motor

80 M2x6mm Extra flat head Torx T6 screws

Fabricante: Sloting Plus

Ref: SP158706

€8.80

M2x6mm flat head screws (0.9mm) with Torx T6 profile, designed by Sloting Plus specifically for the preparation of slot car models in scales 1/32 and 1/24. Bag of 80 units with T6 screwdriver and plastic container of 42 x Ø14mm included.

Rodamiento de bolas eje de 2,38 mm. doble pared

Bearings

2.38mm double wall ball bearing.

Fabricante: Sloting Plus

Ref: SP055200

€12.00

Double-walled ball bearing for 2.38 mm axle, designed by Sloting Plus for chassis that require two-lip bearings. High durability with proper maintenance, compatible with a wide variety of competitive and recreational slot car setups.

Tornillo M2,5 x 7,5 para carrocerías CARRERA

of Bodywork

M2.5 x 7.5 screw for CARRERA bodies

Fabricante: Sloting Plus

Ref: SP159913

€4.96

Torx T6 screw in metric M2.5 x 7.5 specifically designed for CARRERA bodies, whose pegs require a larger thread diameter than other brands. Light-coloured stainless steel material to avoid confusion with the black Phillips screw from previous generations.

Juego de mini destornilladores PHILLIPS y TORX

Herramientas

PHILLIPS and TORX mini screwdriver set

Fabricante: Sloting Plus

Ref: SP143024

€4.00

Three precision Phillips and Torx mini screwdrivers made of steel and plastic, with a length of 10 cm. A compact kit from Sloting Plus designed for fine work in the slot workshop: body screws, chassis, mounts, and much more.

Kit de conversión de 3 mm. a 2,38 mm. (3/32¨¨)

Bearings

3 mm. to 2.38 mm. (3/32") conversion kit

Fabricante: Sloting Plus

Ref: SP053026

€3.28

A simple and cost-effective way to utilise any component with a shaft of Ø 2.38 mm (3/32") —wheels, axles, crown gears, stoppers— in cars that are originally fitted with bearings for a shaft of Ø 3 mm, such as BRM, Revo Slot or TTS.

Wheel covers

Brake disc and caliper set

Fabricante: Sloting Plus

Ref: SP029903

€1.45

Scale brake detail for slot cars: the brake disc and caliper set from Sloting Plus (SP029903) provides a realistic and refined finish to your builds. A perfect addition for those who leave no corner of the car unworked.

Wheel covers

Complete painted wheel cover -Le Mans-

Fabricante: Sloting Plus

Ref: SP029901

€2.53

Complete painted wheel covers with Le Mans design from Sloting Plus: the finishing touch that transforms the appearance of your wheels and brings your slot car closer to the detail of real competition prototypes.

Aluminium

4 classic 32-spoke wheels

Fabricante: MITOOS

Ref: CXM240

€4.51

Set of 4 classic 32-spoke wheels in chrome ABS for 1/32 slot cars, with pressure fit for axles of Ø 2.38–2.40 mm and includes 2 sets of clips. Compatible with Mitoos classic tyres M070–M079.

Out-of-Stock

Braids

Dispenser + 1m copper silver braid

Fabricante: MITOOS

Ref: CXM173

€3.95

One metre of copper braid coated with tin-silver, harder and more durable than bare copper but equally conductive, flexible, and slippery. Includes Mitoos dispenser for extracting the right amount and keeping the rest in perfect condition.

View

Out-of-Stock

Braids

Dispenser + 1m red copper braid

Fabricante: MITOOS

Ref: CXM171

€3.95

Practical dispenser with 1 metre of high conductivity red copper braid. The side opening makes it easy to cut exactly what you need, and the dispenser is reusable: when the braid runs out, you can reload it.

View

3D chassis, Fibre, Metal..

75mm Raid 4x4 ballast subchassis

Fabricante: MITOOS

Ref: CXM908

€5.49

Counterweight of 12.9 g designed for the Mitoos Raid Panda chassis (M907). It is placed on the flat bottom of the chassis and includes mounting screws and an insulating sticker to prevent contact with the track. A simple adjustment that makes a difference in the car's handling.

Coronas en linea

Crown gear z31 line for z8 M2.5

Fabricante: MITOOS

Ref: CXM234

€4.03

Mitoos transmission set consisting of an inline crown gear with 31 teeth, an 8z pinion, and a 1.3 mm Allen key. Made of white nylon with an aluminium insert and secured by an M2.5 mm screw, it is exclusively compatible with 8z pinions.

Showing 97-120 of 671 item(s)