4 classic 32-spoke wheels

Classic 32-Spoke Chrome-Finished Wheels for 1/32 Slot Cars: The Detail That Makes the Difference.

The CXM240 set from Mitoos includes 4 classic 32-spoke wheels injected in ABS with a chrome metallic finish, along with 2 sets of wheel nuts (2 and 3 prongs). A set designed for those who want to faithfully recreate the appearance of classic single-seaters and prototypes in 1/32 scale.

Technical Specifications

• Set Contents: 4 wheels + 2 sets of wheel nuts (2 and 3 prongs)
• Outer Diameter: 16.6 mm
• Base Diameter: 14.2 mm
• Width: 6 mm — Heel: 3 mm
• Material: Injected ABS with chrome metallic finish
• Mounting: Press-fit, no screws, for axles of Ø 2.38 mm to 2.40 mm
• Scale: 1/32

Tire Compatibility

These wheels are compatible with the entire range of Mitoos classic tyres, references M070 to M079. If you already have Mitoos classic F1 tyres, these wheels fit directly without the need for adaptations.

Assembly and Preparation

The press-fit mounting system simplifies assembly: no screws are needed, just fit the wheel onto the axle. However, ensure that your axle diameter is within the specified range (Ø 2.38–2.40 mm) to ensure a tight fit without play that could affect wheel concentricity.

The two sets of wheel nuts included (2 and 3 prongs) allow for adaptation to different axle configurations, adding versatility to the set.

Ideal For…

This set is aimed at enthusiasts restoring or customizing classic 1/32 scale slot cars, especially period Formula 1 single-seaters. The chrome finish provides an authentic and polished appearance that is appreciated both on the track and in display cases.

Frequently Asked Questions

How many wheels does the set include?

The set includes 4 wheels, sufficient to equip a complete car (2 front and 2 rear, depending on the configuration you choose).

What wheel nuts are included?

Two sets of wheel nuts are included: one with 2 prongs and another with 3 prongs, to adapt to different types of axle mounting.

Do I need a screw to secure the wheel?

No. The mounting is press-fit. Ensure that your axle diameter is between Ø 2.38 mm and 2.40 mm to guarantee a proper fit.

Which tyres are these wheels compatible with?

They are compatible with Mitoos classic tyres, references M070 to M079, available in the classic F1 tyres section of their catalogue.

Are they suitable for any classic 1/32 slot car?

They are designed for classic 1/32 scale slot cars with axles of Ø 2.38–2.40 mm. Outside of that axle diameter range, the press-fit may not be appropriate.

Is the chrome finish resistant to track use?

The chrome metallic finish on ABS is standard for slot wheels of this category. For active track use, be aware that wear may be greater than on parts intended solely for display. For decoration and collecting, the finish remains in perfect condition.

The Mitoos CXM240 set includes 4 classic 32-spoke slot car wheels with chrome metallic finish, compatible with Mitoos classic F1 tyres (ref. M070–M079). Designed for 1/32 scale slot cars, with a press-fit axle system for Ø 2.38–2.40 mm axles and no screws required. Ideal for classic slot car restoration, customisation and display.