Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Scaleauto MP4/10 1995 #8 Häkkinen Morro Alto SC-6343

Formula 90-97 MP4/10 1995 N8 Hakinn. - High Nose

Fabricante: Scaleauto

Ref: SC-6343

€82.95

1/32 scale reproduction of the 1995 McLaren MP4/10 with the number #8 of Mika Häkkinen, in High Nose version. Part of the Formula 90-97 series by Scaleauto, this single-seater comes fully finished (Ready To Run) with an ultra-light body, precision mechanics, and everything necessary for high competition on Sport track.

Scaleauto F1 MP4/10 1995 #7 Blundell SC-6342

Formula 90-97 MP4/10 1995 n7 Blundell - High Nose

Fabricante: Scaleauto

Ref: SC-6342

€82.95

1/32 scale reproduction of the 1995 McLaren MP4/10 with the #7 of Mark Blundell, in the High Nose version of the Formula 90-97 series by Scaleauto. Ready to race from the first moment, featuring an SC-0025C motor with 21,500 rpm, an ultra-lightweight body of 0.65 mm, and Supergrip tyres for club competition.

Magnesium

URANO EVO II wheel 16.5 x 10 mm

Fabricante: Sloting Plus

Ref: SP022520

€12.75

Two Sloting Plus Urano EVO II wheels of 16.5 x 10 mm in lightweight technical aluminium, CNC machined for perfect concentricity. Fixed by M2.5 set screw and compatible with 2.38 mm (3/32") axles. A solid reference for competition setups in 1/32.

1/32 spare parts

3D cover for bearing

Fabricante: Sloting Plus

Ref: SP399920

€1.28

Secure and protect the rear axle bearings with this cap made from technical plastic using 3D printing. The kit includes 2 units and complete screws for assembly. Compatible with most Sloting Plus motor mounts.

Controllers and power supplies

PRO R-II controller for Two Fingers

Fabricante: Sloting Plus

Ref: SP130039

€198.00

Redesigned trigger for two fingers, new high-speed microcontroller and protected front curve selector: the PRO R-II from Sloting Plus takes the electronic control of your slot car to another level, both in tight corners and on fast tracks.

Controllers and power supplies

PRO R-II one-finger controller

Fabricante: Sloting Plus

Ref: SP130038

€198.00

The Sloting Plus PRO R-II takes electronic control to the next level: new software, improved sensor, and redesigned trigger for one finger. Greater smoothness in medium and wide radius corners, re-tuned traction, and the characteristic "kick" of the PRO controllers. An evolution designed for the demanding driver.

Out-of-Stock

Controllers and power supplies

Lite-Evo 100% electronic controller

Fabricante: Sloting Plus

Ref: SP130021

€99.00

The Lite-Evo from Sloting Plus is the 100% electronic controller designed for those starting in slot racing without compromising on performance. With 8 power curves, 4 braking levels, and a magnetic trigger, it offers precise, intuitive control adaptable to any track between 8 V and 22 V.

View

Trencilla Extrafina Estañada Rollo 1m. Medidas: 3,5mm Ancho x 0,35mmV

Braids

Extra Fine Tinned Braid Roll 1m. Dimensions: 3.5mm Width x 0.35mm V

Fabricante: Scaleauto

Ref: SC-1630D

€4.95

Scaleauto extra-fine tinned braid in a 1 m roll, with dimensions of 3.5 mm wide by 0.35 mm thick. A precision replacement to maintain perfect electrical contact in your 1/32 scale slot cars.

Magnesium

URANO EVO II TYRE 16.2×10 mm

Fabricante: Sloting Plus

Ref: SP022516

€12.75

Sloting Plus Urano EVO II wheels with a diameter of 16.2 mm and a width of 10 mm, made from lightweight technical aluminium with CNC machining. Perfect concentricity, secured by an M2.5 set screw, and compatible with 2.38 mm (3/32") axles. A reference spare part for demanding competition setups.

Piñón 14d. Acero para eje 2mm. ø7,50m x 2.5mm

Steel

11t pinion. Steel for 2mm axle. ø6.0mm x 2.5mm

Fabricante: Scaleauto

Ref: SC-1131B60

€3.95

Scaleauto steel pinion with 11 teeth designed for a 2 mm axle, with an outer diameter of 6.0 mm and a width of 2.5 mm. A precision spare part to keep the transmission of your 1/32 slot car in perfect tuning condition.

Steel

14t pinion. Steel for 2mm axle. ø7.50m x 2.5mm

Fabricante: Scaleauto

Ref: SC-1134B75

€3.95

14-tooth steel pinion for 2 mm axle (ø7.50 mm x 2.5 mm) from Scaleauto. Made of steel for precise transmission and wear resistance in 1/32 competition setups or regular club use.

Rear

Rubber Tyre 20x12mm New Shore 30 for Wheels ø15/17mm.

Fabricante: Scaleauto

Ref: SC-4721SH30

€6.96

Four Scaleauto rubber tyres in size 20x12mm and Shore hardness 30, compatible with wheels of ø15 and ø17mm. A soft compound option designed for the rear axle in 1/32 competition, where grip and consistency make the difference.

Callaway GT3 Adac Gt master 2021 nº77 -R Version-

Modern GT

Callaway GT3 Adac Gt master 2021 no.77 -R Version-

Fabricante: Scaleauto

Ref: SC-6347R

€79.92

The Callaway GT3 no. 77 from the ADAC GT Master 2021 arrives in R version with long can motor SC-0011 at 20,000 rpm, Anglewinder configuration, rear wheels in aluminium and bronze spherical bearings. Careful exterior detail and complete interior, ready to run from the first moment.

Separadores Eje de 3mm. en acero 0,5mm Photoedge

1/24 Spare Parts

3mm Shaft Spacers in 0.25mm Photoetched Steel

Fabricante: Scaleauto

Ref: SC-8111F

€5.20

3 mm axle spacers made of 0.25 mm steel by Scaleauto under the Photoedge line. Designed for fine adjustment of the running gear in 1/24 scale, they allow precise tuning of the lateral position of axles and wheels in the assembly of your slot car.

1/24 Spare Parts

3mm Shaft Spacers in 0.5mm Photoetch Steel

Fabricante: Scaleauto

Ref: SC-8111E

€5.20

3mm axle spacers made of 0.5mm steel from the Photoedge line of Scaleauto, reference SC-8111E, for 1/24 scale. A precision spare part designed for the millimetric adjustment of the running gear and the tuning of your slot car.

1/24 Spare Parts

3mm axle spacers in 1mm brass.

Fabricante: Scaleauto

Ref: SC-8111D

€4.72

3 mm axle spacers made of brass with a thickness of 1 mm, reference SC-8111D from Scaleauto. Designed to fine-tune the lateral positioning of the axle in 1/24 scale slot car setups, providing precision and consistency in every preparation.

1/24 Spare Parts

3mm axle spacers in 1.5mm brass

Fabricante: Scaleauto

Ref: SC-8111C

€4.72

3 mm axle spacers made of 1.5 mm thick brass, reference SC-8111C from Scaleauto for 1/24 scale. A small detail in preparation that makes a difference in the fit and alignment of the drivetrain.

1/24 Spare Parts

3mm axle spacers. 3mm brass

Fabricante: Scaleauto

Ref: SC-8111B

€5.20

3 mm axle spacers made of brass by Scaleauto, designed for 1/24 scale. They allow precise adjustment of the lateral positioning of wheels and axles in your slot car setups and tuning.

1/24 Spare Parts

3mm axle spacers in brass 5mm.

Fabricante: Scaleauto

Ref: SC-8111A

€5.20

3 mm axle spacers made of 5 mm brass from Scaleauto, reference SC-8111A for 1/24 scale. A small spare part with a key role: achieving the exact lateral adjustment of the rear axle and fine-tuning the car's behaviour on track.

Interior Plus + Cristales en Lexan para Hyundai I20 WRC

Out-of-Stock

1/24 bodies

Interior Plus + Lexan Windows for Hyundai I20 WRC

Fabricante: Scaleauto

Ref: SC-7922

€5.12

Detailed interior set and Lexan windows specifically designed for the Belkits Hyundai I20 WRC body in 1/24 scale. A replacement from Scaleauto that enhances the realism of your body with fitted and precisely finished parts.

View

Modern GT

P911 (992 model) GT3 24h LM2024 Team Manthey n92

Fabricante: Scaleauto

Ref: SC-6420R

€79.92

Slot replica of the Porsche 911 (992) GT3 from Team Manthey that competed in the 24h of Le Mans 2024, in R racing version. SC-0011 motor with 20,000 rpm, rear wheels in aluminium, RT3 anglewinder mount and removable magnet. Includes display case.

twin-pack-p911-992-gt3-le-mans-2024-winner-scaleauto.jpg

Resins and Collectors

Porsche 911 (992) GT3 R Manthey EMA Le Mans 2024 Winner Twin Pack

Fabricante: Scaleauto

Ref: SC-6419PACK

€159.92

Limited edition of 300 units worldwide: the Scaleauto Twin Pack commemorating Manthey EMA's victory at the 2024 24 Hours of Le Mans, featuring the race numbers 91 and 92 of the Porsche 911 (992) GT3 R reproduced with exceptional fidelity. A collector's item with a competitive spirit.

Porsche 911 Carrera RSR 3.0 1974 White Racing Kit

In Stock

Modern GT

Porsche 911 Carrera RSR 3.0 1974 White Racing Kit

Fabricante: Scaleauto

Ref: SC-6204

€60.72

Complete Scaleauto kit with unpainted white body of the Porsche 911 Carrera RSR 3.0 1974 and fully assembled soft chassis R2.0 in-flex Anglewinder. Perfect for customising with your own livery and competing confidently on the Sport track.

Modern GT

Porsche 911 Carrera RS 2.7 1973 White Racing Kit

Fabricante: Scaleauto

Ref: SC-6203

€60.72

Complete racing kit of the legendary 1973 Porsche 911 Carrera RS 2.7 in unpainted white body, ready for customisation. Includes fully assembled soft chassis R2.0, SC-0011 motor with 20,000 rpm and anglewinder configuration. The perfect base to build your own RS.

Showing 97-120 of 1447 item(s)