Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM012

€5.82

Four Raid 25x10 Trail tyres with an asymmetric tread designed specifically for trial enthusiasts. A pack ready to equip your car and tackle the track with greater confidence.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM011

€5.82

Four Needle Peak tyres in size 25x9, specially designed for Raid in dirty track conditions. Large rubber volume to maintain grip where other tyres fail.

Rally and Raid

4 Raid tyres

Fabricante: MITOOS

Ref: CXM010

€6.72

Four Raid CXM010 tyres in size 23x9 with Needle Peak profile, specially designed for dirt, mud, and snow surfaces. The right choice when the track gets challenging.

Out-of-Stock

Rally and Raid

4 RAID tyres

Fabricante: MITOOS

Ref: CXM009

€5.49

Four RAID 26x10 Protrac tyres specifically designed for dirty terrain: snow and dirt. A solid choice when conditions get tough and grip is everything.

View

In Stock

Rally and Raid

4 RAID tyres

Fabricante: MITOOS

Ref: CXM008

€6.99

Pack of 4 RAID Protrack tyres in size 23x9, specifically designed for dirty tracks. A straightforward option for those seeking real performance in muddy conditions without the hassle of installation.

In Stock

Formula 1

4 F1 tyres

Fabricante: MITOOS

Ref: CXM007

€5.70

Four super soft high grip tyres designed for slot F1 single-seaters. Extra soft compound that maximises corner traction and revitalises your car in every track session.

In Stock

Rally and Raid

4 Needle peak tyres

Fabricante: MITOOS

Ref: CXM006

€6.32

Four Needle Peak tyres (ref. CXM006) designed to perform on dirt and low snow surfaces. A complete set aimed at enthusiasts seeking real grip in low adhesion conditions.

Out-of-Stock

Rally and Raid

4 Squared tyres

Fabricante: MITOOS

Ref: CXM005

€5.93

Four Squared micro-tread tyres, reference CXM005, designed for running on dirt or snow on slot tracks. A complete set aimed at those seeking grip and control in the most demanding conditions off the asphalt.

View

Rear

4 S4 tyres

Fabricante: MITOOS

Ref: CXM004

€6.39

Pack of 4 S4 tyres (ref. CXM004) to improve grip and response of your slot car on track. A direct replacement that makes a difference in corner exit and overall stability.

Rear

4 S3 tyres

Fabricante: MITOOS

Ref: CXM003

€5.48

Four S3 tyres (ref. CXM003) ready to equip your slot car. An essential spare part to maintain grip and consistency on track in every session.

In Stock

Rear

4 S2 tyres

Fabricante: MITOOS

Ref: CXM002

€5.84

Four S2 tyres ready to fit and improve the performance of your slot car. A direct replacement that makes a difference in grip and consistency lap after lap.

In Stock

Rear

4 S1 tyres

Fabricante: MITOOS

Ref: CXM001

€5.84

4 S1 tyres designed for asphalt with high grip. A solid option for those seeking consistent traction and predictable behaviour on track.

Out-of-Stock

Fronts

4 S0 tyres

Fabricante: MITOOS

Ref: CXM000

€6.39

Four S0 tyres with "0" Grip specifically for front wheels. An option designed for those who want to keep the handling of the front end under control and make the most of every track session.

View

Electric

Motor "Thrust B-Spec 21T"

Fabricante: Absima

Ref: HD2310076

€19.95

The Thrust B-Spec 21T is a brushed motor with a 21-turn winding, designed to provide a solid balance between torque and top speed on track. A sensible choice for those seeking consistency lap after lap.

Plastic Chassis

Radical SR-9 chassis ver.2

Fabricante: Scaleauto

Ref: SC-6612A2

€6.98

Replacement chassis Radical SR-9 ver.2 in standard hardness (black), reference SC-6612A2 from Scaleauto. A key component to maintain or restore your slot car with the original factory geometry and stiffness.

Out-of-Stock

Aluminium

MONZA aluminium wheel 15.8 x 8.5 mm.

Fabricante: Scaleauto

Ref: SC-4031D25

€11.92

Machined aluminium wheel MONZA 2 in dimensions 15.8 x 8.5 mm, designed for a 3/32 axle. Stiffness, concentricity, and low weight to ensure every tenth counts on track.

View

In Stock

Cable

Silicone wire 0.9mm 2m. Green colour

Fabricante: Scaleauto

Ref: SC-1625

€4.48

Flexible silicone wire of 0.9 mm and 2 metres in green, signed by Scaleauto. Perfect for renewing or customising the electrical wiring of your slot cars with precision and reliability.

RT short suspension kit 2 hard springs and 2 soft springs SC-5128B

In Stock

For bench

RT short suspension kit with 2 hard springs and 2 soft springs

Fabricante: Scaleauto

Ref: SC-5128B

€6.82

The SC-5128B kit includes 4 springs for the short RT suspension —2 hard and 2 soft— and allows you to precisely adjust the chassis response according to the demands of each track and your driving style.

In Stock

Fronts

Zero Grip rubber tyre 17.5x10mm

Fabricante: Scaleauto

Ref: SC-4723

€4.81

Scaleauto Zero Grip rubber tyre in size 17.5x10mm (ref. SC-4723). Designed to provide minimal controlled grip, ideal for tuning setups where the aim is to reduce grip to the maximum and adjust the car's behaviour on track.

Accessories

ADHESIVE BALANCE WEIGHT 100X50X2MM

Fabricante: Scaleauto

Ref: SC-1513

€3.60

Scaleauto adhesive counterweight (SC-1513) measuring 100×50×2 mm to adjust and optimise the weight distribution in your slot car. Easy to cut and place where you need it most to improve track stability.

Coronas en linea

28d In-Line Nylon Crown Gear

Fabricante: Scaleauto

Ref: SC-1114

€7.20

28-tooth nylon crown gear designed for inline setups. Smooth transmission, low noise level, and precise engagement: a key component in the preparation of any slot car drivetrain.

In Stock

Coronas anglewinder

Crown gear 29d. Anglewinder 25° Procomp-R

Fabricante: Scaleauto

Ref: SC-1169R

€5.43

29-tooth crown gear for 25° Anglewinder configuration from Scaleauto's Procomp-R range. Designed for a 2.38 mm axle, with a diameter of 15.8 mm and secured with an M2.5 screw. A reference spare part for precisely preparing and tuning your slot car.

Out-of-Stock

Body shell

BMW M1 Gr.5 body shell

Fabricante: Scaleauto

Ref: SC-3608

€21.62

Body of the iconic BMW M1 in Group 5 version for 1/32 scale slot cars. A perfect piece for those looking to replace or customise their model as well as for enthusiasts of modelling and miniature painting.

View

Body shell

DE TOMASO PANTERA GR3 BODY SHELL

Fabricante: Scaleauto

Ref: SC-3609

€26.25

De Tomaso Pantera GR3 body in 1/32 scale, reference SC-3609. A piece that captures the essence of the iconic Italo-American sports car in its racing version, ready to be decorated, customised, and put on track.

Showing 1369-1392 of 1395 item(s)