Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Workshop

PINION EXTRACTOR

Fabricante: MITOOS

Ref: CXM060

€8.85

A tool designed for those who pay attention to every detail of the drivetrain: the CXM060 pinion extractor allows for the clean, safe removal of pinions from the axle without forcing any parts, extending the lifespan of your components.

Out-of-Stock

Others

CLIMA 2 TYRE SET + DICE

Fabricante: MITOOS

Ref: CXM050

€7.20

Give an unpredictable twist to your slot sessions with this set of 6 weather tyres —dry, wet, and ice— and the dice that determines the race conditions before rolling.

View

Others

CLIMATE TYRE SET 1 + DICE

Fabricante: MITOOS

Ref: CXM049

€7.20

Six weather tyres —dry, rain, and ice— plus a die to determine the race conditions. A simple and fun way to add tactical uncertainty to your slot sessions.

Others

4 TYRE ICE-2

Fabricante: MITOOS

Ref: CXM048

€4.50

Four ICE-2 ice effect tyres designed to turn any slot race into a drift battle. Compatible with 16.5 mm or larger wheels for uninterrupted fun.

Out-of-Stock

Others

4 TYRE ICE-1

Fabricante: MITOOS

Ref: CXM047

€4.48

Four ICE-1 ice effect tyres designed to turn any session into a drifting festival. Compatible with wheels of 15.5 mm or larger.

View

Others

ICE-0 tyres x4

Fabricante: MITOOS

Ref: CXM046

€4.50

Four ice effect tyres for fitting on 15 mm or smaller wheels. Designed for those who enjoy racing at the limit of grip, with controlled drifts and guaranteed fun in every corner.

Others

Rain-2 tyres

Fabricante: MITOOS

Ref: CXM045

€4.48

Rain-2 tyres designed to simulate wet conditions on a dry track, without the need to modify grip. Starting from a 16.5 mm rim. Drifting, oversteer, and challenging driving guaranteed.

Others

Rain-1 tyres

Fabricante: MITOOS

Ref: CXM044

€4.50

Designed to simulate wet racing without affecting track grip, the Rain-1 drastically reduce traction and turn every session into a driving challenge filled with drifting. Compatible with 15.5 mm or larger wheels.

Others

Rain-0 tyres

Fabricante: MITOOS

Ref: CXM043

€4.50

Designed to simulate wet racing without altering track grip, the Rain-0 tyres (ref. CXM043) turn each heat into a test of driving skill: spectacular drifts and driving on the edge guaranteed. Compatible with 15 mm or smaller wheels.

Others

Tyres x4 Dry-2

Fabricante: MITOOS

Ref: CXM042

€4.48

Four Dry-2 tyres (ref. CXM042) designed for 16.5 mm rims. Their compound offers controlled slip, ideal for adjusting your driving style to your preferences and the type of track.

Out-of-Stock

Others

Tyres x4 Dry-1

Fabricante: MITOOS

Ref: CXM041

€4.50

Four Dry-1 tyres designed for those who enjoy controlled drifting on track. Compatible with wheels of 15.5 mm or larger, they provide that precise and predictable slip that makes the difference between a spectacular drift and a track exit.

View

Others

Tyres x4 Dry-0

Fabricante: MITOOS

Ref: CXM040

€4.50

Four Dry-0 tyres (ref. CXM040) designed for wheels up to 15.5 mm. Their controlled slip compound offers a progressive track response that is ideal for both club sessions and competition setups.

Kit suspensión larga RT con 2 muelles duros y 2 blandos

In Stock

For bench

RT long suspension kit with 2 hard springs and 2 soft springs

Fabricante: Scaleauto

Ref: SC-5128A

€6.82

RT long suspension kit (ref. SC-5128A) with 2 hard springs and 2 soft springs to adjust the stiffness of the front or rear end of your slot car. A straightforward way to fine-tune cornering behaviour and gain consistency lap after lap.

Out-of-Stock

Wheels and tyres

RT 25x13 rubber tyre slicks

Fabricante: Scaleauto

Ref: SC-4749

€5.95

RT rubber slick tyres in size 25x13, designed to provide consistent grip and a clean footprint on the track. A solid option for tuners and drivers looking for consistency lap after lap.

View

Out-of-Stock

Controllers and power supplies

PARMA ECONOMY 60 OHM CONTROLLER

Fabricante: Scaleauto

Ref: P-217

€32.93

The Parma Economy 60 Ohm controller (ref. P-217) offers precise and progressive control for slot track driving, with a resistance of 60 ohms designed for those seeking reliability at an affordable price.

View

In Stock

Coronas anglewinder

27d crown gear. Anglewinder 25°

Fabricante: Scaleauto

Ref: SC-1167R

€5.43

27-tooth nylon crown gear designed for 25° anglewinder configurations. Compatible with the Procomp-RS M50 motor group, 2.38 mm axle, and 15.8 mm outer diameter. Fixed with M2.5 screw.

Rear

S5 Tyres

Fabricante: Sloting Plus

Ref: SLPLM-S5

€6.30

S5 tyres from Sloting Plus in size 18x10.5mm, designed to provide reliable grip and consistent performance on track. A preparation option for demanding enthusiasts.

Rear

S2 Tyres

Fabricante: Sloting Plus

Ref: SLPLM-S2

€5.00

S2 tyres from Sloting Plus in size 18x10mm, designed as precision replacements for slot cars. A reliable option to maintain grip and response on track with a direct and uncomplicated fit.

Rear

S1 Tyres

Fabricante: Sloting Plus

Ref: SLPLM-S1

€5.00

S1 tyres from Sloting Plus in size 17x10 mm, designed to improve grip and stability of your slot car on track. A reliable spare from the Sloting Plus tuning catalogue.

Out-of-Stock

Cross crowns

Straight tooth crown z33 sidewinder

Fabricante: Sloting Plus

Ref: SLPL8133

€6.10

Sloting Plus z33 straight tooth crown gear for Sidewinder configurations. Diameter 17.5 mm and shaft of 2.38 mm (3/32"), designed for those seeking precision in transmission without compromising reliability on track.

View

Cross crowns

Straight tooth crown z35 sidewinder

Fabricante: Sloting Plus

Ref: SLPL8135

€6.10

Z35 straight tooth crown gear from Sloting Plus for Sidewinder configurations. Diameter 17.5 mm and shaft of 2.38 mm (3/32"), designed to provide a clean and efficient transmission in your competition or regular running setups.

Cross crowns

Straight tooth crown z36 sidewinder

Fabricante: Sloting Plus

Ref: SLPL8136

€6.10

Sloting Plus straight tooth crown gear z36 designed for Sidewinder setups. With a diameter of 17.5 mm and a shaft of 2.38 mm (3/32"), it provides precise and direct transmission to optimise the performance of your slot car.

Set 4 palomillas tres brazos "Borrani" para llanta M026

Plastic

Set of 4 three-arm "Borrani" wing nuts for M026 wheel

Fabricante: MITOOS

Ref: CXM135

€1.50

Four three-arm wing nuts with a Borrani design for M026 wheels. A touch of classic authenticity that makes a difference in any worthy slot car.

In Stock

Allen and Torx screw

10 M2.5 Allen screws

Fabricante: MITOOS

Ref: CXM121

€2.49

Ten M2.5 Allen screws ready for the assembly, adjustment, and preparation of your slot and modelling projects. A workshop consumable that is advisable to have on hand when working with precision.

Showing 1489-1512 of 1593 item(s)