Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

Bearings

Evo Lub universal bearing

Fabricante: Sloting Plus

Ref: SP051002

€3.35

The Evo Lub universal bearing from Sloting Plus combines an internal lubricant reserve groove with a minimised friction surface. It definitively replaces the previous UNIVERSAL model and is compatible with traditional or 3D plastic mounts with a diameter of between 4.6 and 5 mm.

Carbon

Carbon axle 2.38 x 54 mm

Fabricante: Sloting Plus

Ref: SP041254

€4.56

Rectified and calibrated carbon fibre measuring 54 mm in length and 2.38 mm in diameter (3/32''). Weighing only 0.34 g per unit, this axle from Sloting Plus is the usual choice for the front axle when lightness makes a difference. Pack of 2 units.

Arandela especial REDONDA para chasis y bancadas

Nuts and washers

Special ROUND washer for chassis and mounts

Fabricante: Sloting Plus

Ref: SP150042

€5.20

Small but key in the setup: the round washer SP150042 from Sloting Plus allows for precise adjustment of the pivot screw, regulation of the motor mount, and prevents screws from falling onto the track. Stainless steel, 0.15 mm thick, suitable for M2 and M2.1 mm screws. Pack of 40 units.

For axle

-U- FORK suspension kit

Fabricante: Sloting Plus

Ref: SP110031

€6.95

Two units of -U- FORK suspension made of stainless steel by Sloting Plus. A precision spare part designed for the preparation and technical setup of your slot car.

For axle

Suspension kit - FRONT SUSPENSION

Fabricante: Sloting Plus

Ref: SP110030

€8.80

Stainless steel front suspension system from Sloting Plus, designed exclusively to work with the independent wheel axle SP046001. Each pack includes 2 units, 4 springs, and 4 M2 Nylon nuts, opening a new dimension of preparation and tuning in slot racing.

Polea UNIVERSAL Ø10 eje 2,38 mm. ROJO Slotingplus

Out-of-Stock

Pulleys

UNIVERSAL pulley Ø10 shaft 2.38 mm. RED

Fabricante: Sloting Plus

Ref: SP079932

€6.05

Universal pulley made of duraluminium with a conical interior design for belts with a diameter of 1 and 1.5 mm. Improves traction, tolerates misalignments, and reduces the risk of belt disengagement. Includes M2 x 3 mm allen screw. Bag with 2 units.

View

Polea UNIVERSAL Ø8 eje 2,38 mm. AZUL Slotingplus

Pulleys

UNIVERSAL pulley Ø8 shaft 2.38 mm. BLUE

Fabricante: Sloting Plus

Ref: SP079931

€6.75

Cone-shaped internal design duraluminium pulley for 1 and 1.5 mm belts, with a 2.38 mm shaft and finished in blue. Improves traction and tolerates misalignment between axles. Pack of 2 units and includes M2 x 2.5 mm allen screw.

Separador MAXI 0,20 mm. para guia 1/32 UNIVERSAL

Spacers

MAXI 0.20 mm spacer for 1/32 UNIVERSAL guide

Fabricante: Sloting Plus

Ref: SP069004

€3.54

MAXI spacer of 0.20 mm designed for the 1/32 Universal guide from Sloting Plus: it fits almost all guides on the market, minimises lateral oscillation and ensures a clean fit between the screw shaft and the braid support.

SP069003 Separador MAXI 0,10 mm. para guia 1/32 UNIVERSAL SLOTINGPLUS

Spacers

MAXI spacer 0.10 mm for 1/32 UNIVERSAL guide

Fabricante: Sloting Plus

Ref: SP069003

€3.54

MAXI spacer of 0.10 mm from Sloting Plus for 1/32 Universal guide: fits between the screw shaft and the braid support to minimise lateral oscillation. Direct, uncomplicated solution, compatible with the vast majority of guides on the market.

Kit de semiejes UNIVERSAL y MULTIFUNCIONAL

Specials

UNIVERSAL and MULTIFUNCTIONAL axle kit

Fabricante: Sloting Plus

Ref: SP046001

€9.75

One single reference, infinite possibilities: the SP046001 semi-axle kit from Sloting Plus is suitable for any 1/32 model and allows for multiple setups, including axle for independent wheels, custom-fitted without the need for cuts or special tools.

1/32 spare parts

Pressure pinion Ø 7 x Z13 STEEL

Fabricante: Sloting Plus

Ref: SP084213

€6.00

Pressure pinion in steel from Sloting Plus, with an outer diameter of 7 mm and 13 teeth, designed for offset chassis between 0.5 and 1 mm. It inserts directly onto 2 mm axles and expands the possibilities of combination with different crown gears to fine-tune the gear ratio to your specifications.

Steel

Pressure pinion Ø 7 x Z12 STEEL

Fabricante: Sloting Plus

Ref: SP084212

€6.00

Sloting Plus steel press-fit pinion with an outer diameter of 7 mm and 12 teeth, designed for offset mounts between 0.5 and 1 mm from any brand. It press-fits onto 2 mm motor shafts and expands the available gear combinations with different crown gears.

Bronze

Pressure pinion Ø 7 x Z13 BRASS

Fabricante: Sloting Plus

Ref: SP084113

€5.44

Brass pressure pinion from Sloting Plus with an outer diameter of 7 mm and 13 teeth, designed for offset mounts between 0.5 and 1 mm of any brand. It fits directly onto a 2 mm motor shaft, expanding your transmission combinations with different crown gears.

Bronze

Pressure pinion Ø 7 x Z12 BRASS

Fabricante: Sloting Plus

Ref: SP084112

€5.44

Brass pressure pinion with an outer diameter of 7 mm and 12 teeth, manufactured by Sloting Plus for offset mounts between 0.5 and 1 mm. Compatible with a 2 mm motor shaft, it expands the gear ratio combinations with different crown gears. Ref. SP084112.

Ergal

SP084013 - Aluminium Pressure Pinion Z13 Ø 7 x2

Fabricante: Sloting Plus

Ref: SP084013

€5.44

Aluminium pressure pinion with 13 teeth and an outer diameter of 7 mm, designed for offset mounts of 0.5 to 1 mm. For a motor shaft with a diameter of 2 mm. Pack of 2 units from Sloting Plus.

Ergal

Pressure pinion Ø 7 x Z12 DURALUMINIUM

Fabricante: Sloting Plus

Ref: SP084012

€5.44

Pressure pinion in duraluminium of Ø7 mm and 12 teeth, designed for offset mounts of 0.5 to 1 mm from any brand. Compatible with a 2 mm diameter motor shaft, it expands the combinations with crown gears of different sizes.

Spacers

5 mm spacer. MINI INOX. for 2.38 mm axle (3/32").

Fabricante: Sloting Plus

Ref: SP062305

€2.90

5 mm long stainless steel spacer with a 3 mm outer diameter, designed for 2.38 mm (3/32") axles. Compatible with ball bearings, ball joints, and bushings from any slot manufacturer. Supplied in a pack of 10 units.

4mm Stainless Steel Spacer x10 | SP062304

Spacers

Separator 4.00mm Stainless steel x10pcs

Fabricante: Sloting Plus

Ref: SP062304

€2.90

4 mm long stainless steel spacers designed for a 2.38 mm (3/32'') axle, with a 3 mm outer diameter. Compatible with ball bearings, ball joints, and bushings from any slot car manufacturer. Pack of 10 units.

Spacers

3 mm spacer. MINI INOX. for axle 2.38 mm. (3/32'')

Fabricante: Sloting Plus

Ref: SP062303

€2.90

Mini stainless steel spacer for 2.38 mm (3/32") axle, with a length of 3 mm and an outer diameter of 3 mm. Specifically designed for precise fitting with ball bearings, ball joints, and bushings. Bag of 10 units.

SP141018 - Punta allen M3 0,95mm Big Tip Sloting Plus

Herramientas

Allen tip 0.95mm BIG TIP

Fabricante: Sloting Plus

Ref: SP141018

€3.70

Tempered steel Allen tip with a 0.95 mm hexagon and a 2.3 mm diameter shank, designed for M2 Allen screws. Precision and durability for the setup of your slot car. Ref. SP141018, from Sloting Plus. Bag with 1 unit.

Workshop

Small Setup Base

Fabricante: MITOOS

Ref: CXM118S

€6.88

Mitoos setup base made of acrylic, includes 4 silicone pads to keep it fixed on the table. A simple and practical tool to fine-tune your slot cars with comfort and precision.

CXM118L - PEANA REGLAJE 1/24 y Camiones - Mitoos

Workshop

Large Setup Base

Fabricante: MITOOS

Ref: CXM118L

€8.96

The large setup base from Mitoos, made of acrylic, provides a stable and precise surface for preparing slot cars in 1/24 scale and trucks. It includes 4 silicone pads to prevent movement while you work.

CXM125 - Botella 25cc vacía Cartrix Mitoos

Herramientas

Empty 25cc bottle

Fabricante: MITOOS

Ref: CXM125

€1.75

25 cc applicator bottle with a long, fine metal tip, rubber closure, and precision dosing. Ideal for lubricating the moving components of your slot cars. Lubricant not included.

CXM110 - Botella 10cc vacía Cartrix Mitoos

Herramientas

Empty 10cc bottle

Fabricante: MITOOS

Ref: CXM110

€1.63

10 cc applicator bottle with a long, fine metal tip and rubber closure, designed to apply lubricant with total precision to the moving components of your assemblies. Lubricant not included.

Showing 145-168 of 663 item(s)