Home

At Ministry of Hobby you will find a carefully curated catalogue for enthusiasts: slot, diecast, models, figures, and dioramas. Honest advice, deep specialisation, and stock designed for those who truly live the hobby.

Todos los productos Home

In Stock

Allen and Torx screw

DIN 913 M2x2 Allen screws (10 pcs)

Fabricante: MITOOS

Ref: CXM320

€2.65

Ten DIN 913 M2x2 headless Allen screws from Mitoos, designed for the adjustment and fixation of components in competition slot cars. Precision fasteners for those who leave no detail to chance.

CX M238 - Corona linea z31 multipiñón allen M2,5 cartrix mitoos

Coronas en linea

Z31 crown gear multipinion Allen M2.5

Fabricante: MITOOS

Ref: CXM238

€5.15

Complete set for inline configuration: Mitoos crown gear with 31 teeth in grey nylon, axle spacer in aluminium, 55 mm axle (Ref. M055) and 1.3 mm Allen key. Solid fixation using M2.5 Allen screw with aluminium insert. Compatible with Mitoos pinions M208 to M214.

CX M237 - Corona linea z29 multipiñón allen M2,5 cartrix mitoos

Coronas en linea

Z29 crown gear multipinion M2.5 allen

Fabricante: MITOOS

Ref: CXM237

€5.15

Set of four pieces for inline assembly: Mitoos crown gear with 29 teeth in grey nylon, axle spacer in aluminium, 55 mm axle, and 1.3 mm allen key. Secure fastening using M2.5 allen screw on aluminium insert. Compatible with the entire range of Mitoos pinions (M208-M214).

CX M236 - Corona linea z27 multipiñón allen M2,5 cartrix mitoos

Coronas en linea

Z27 multi-pinion crown gear Allen M2.5

Fabricante: MITOOS

Ref: CXM236

€5.15

Set of four pieces to assemble a complete inline configuration: Mitoos 27-tooth crown gear in grey nylon, aluminium axle spacer, 55 mm axle (Ref. M055) and 1.3 mm Allen key. Solid fixation using M2.5 screw with aluminium insert. Compatible with the entire range of Mitoos pinions (Ref. M208-M214).

CX M235 - Corona linea z25 multipiñón allen M2,5 cartrix mitoos

Coronas en linea

Z25 crown gear multi-pinion M2.5 allen

Fabricante: MITOOS

Ref: CXM235

€5.15

25-tooth crown gear made of grey nylon, fixed with an M2.5 Allen screw with an aluminium insert. The set includes a shaft spacer, 55 mm Mitoos shaft, and a 1.3 mm Allen key. Compatible with the entire range of Mitoos pinions (M208-M214).

CX M224 - CoPol Alu 40z + 15z 21mm cartrix mitoos

Cross crowns

CoPol Alu 40t + 15t 21mm

Fabricante: MITOOS

Ref: CXM224

€9.44

40-tooth crown gear and 15-tooth MXL pulley machined from a single piece of aluminium. Module 0.5 mm, tooth width 1.5 mm, and outer diameter of 21 mm. Direct attachment to a 2.38 mm (3/32") shaft using an M2.5 mm Allen screw.

CX M223 - CoPol Alu 38z + 15z 20mm cartrix mitoos

In Stock

Cross crowns

CoPol Alu 38t + 15t 20mm

Fabricante: MITOOS

Ref: CXM223

€9.44

Machined aluminium part that integrates a 38-tooth crown gear and a 15-tooth MXL pulley in a single block. Module 0.5 mm, tooth width 1.5 mm and outer diameter of 20 mm, for shafts of 2.38 mm (3/32"). Fixing by M2.5 mm DIN 913 allen screw.

CX M219 - Corona z40 Ø21mm allen M2.5 cartrix mitoos

Cross crowns

Crown gear z40 Ø21mm allen M2.5

Fabricante: MITOOS

Ref: CXM219

€4.50

Mitoos aluminium crown gear with 40 teeth, made from a single piece, secured with an M2.5mm Allen screw. Module 0.5mm, tooth width 1.5mm, and outer diameter of 21mm. Compatible with 2.38mm (3/32″) axles.

CX M218 - Corona z38 Ø20mm allen M2.5 cartrix mitoos

In Stock

Cross crowns

Crown gear z38 Ø20mm allen M2.5

Fabricante: MITOOS

Ref: CXM218

€4.50

Mitoos aluminium crown gear with 38 teeth made from a single piece for maximum rigidity. Module 0.5 mm, tooth width 1.5 mm, outer diameter 20 mm, and axle hole of 2.38 mm (3/32"). Fixed with M2.5 allen screw (DIN913).

In Stock

Nylon

7t nylon pinion (4 pcs)

Fabricante: MITOOS

Ref: CXM207

€1.90

Four nylon pinions with 7 teeth, module 0.5 mm and an outer diameter of 4.5 mm. They fit snugly onto 2 mm axles and are distinguished by their characteristic turquoise blue colour, ideal for quick identification in the workshop.

CXM206 - Motor M6 + Magnet Mitoos Cartrix

Motors

M6 Motor + Magnet

Fabricante: MITOOS

Ref: CXM206

€12.44

The M6 Plus long can motor (ref. CXM206) delivers 21,000 RPM at 12V and 26,000 RPM at 15V, with a smooth 2 mm shaft and external magnetic effect. A compact, powerful unit ready to demand more from your slot car.

CXM204D - Motor M4 + Magnet doble eje Mitoos Cartrix

Motors

M4 Motor + Double Shaft Magnet

Fabricante: MITOOS

Ref: CXM204D

€12.44

Power and precision in a single block: the M4 Plus long can motor with dual shaft (ref. CXM204D) delivers 18,500 RPM at 12V, 2 mm smooth shaft and external magnetic effect, making it a solid choice for demanding slot car setups.

CXM204 - Motor M4 + Magnet Mitoos Cartrix

Motors

M4 Motor + Magnet

Fabricante: MITOOS

Ref: CXM204

€12.44

The M4 Plus long can motor (CXM204) combines solid performance —18,500 RPM at 12V, 20,000 at 15V— with integrated external magnetic effect. Smooth 2 mm shaft and 12 mm length for a clean and direct installation in your slot project.

Motors

M3 Motor

Fabricante: MITOOS

Ref: CXM203

€10.43

The M3 short can motor is the specific motorisation option for the Mitoos Panda Raid chassis. With 22,000 RPM at 12V, a 2 mm grooved shaft, and a complete absence of magnetic effect, it offers an honest and agile performance that rewards technical driving.

CXM191 - 2 Rodamientos de bola pestaña lateral Mitoos Cartrix

Bearings

Ball bearings with flange x2

Fabricante: MITOOS

Ref: CXM191

€3.66

Precision where it matters most: these 2 micro-ball bearings with side flanges and sealed caps are made from chrome steel to provide virtually zero friction and a long lifespan in any slot or modelling application.

CXM190 - 2 Rodamientos de bola ZZ Mitoos Cartrix

Bearings

ZZ ball bearings x2

Fabricante: MITOOS

Ref: CXM190

€3.05

Set of 2 high-precision ZZ ball bearings with sealed side covers. Made from chrome steel, they provide virtually zero friction for more efficient transmissions and perfectly centred axles.

CXM169 Rótula amortiguador + eje metal x4 Mitoos , Cartrix

For axle

Mini shock absorber fork

Fabricante: MITOOS

Ref: CXM169

€4.74

Set of 4 shock absorber ball joints plus axle from the Mini series by Mitoos, designed for rally and raid cars. Self-lubricating material that minimises friction and absorbs shocks without breaking easily.

CXM168 Horquilla amortiguador + eje metal x4 Mitoos , Cartrix

For axle

MITOOS shock absorber fork

Fabricante: MITOOS

Ref: CXM168

€4.74

Set of 4 shock absorber forks from the PRO series by MITOOS, featuring a 2 mm metal shaft, self-lubricating material and low mechanical friction. Compatible with STD shock absorbers and designed to withstand the demands of rally and raid without breaking.

CXM153 Amortiguador Mitoos STD-E Regulable Rótula R Mitoos , Cartrix

For axle

Mitoos STD-E Shock Absorber x2

Fabricante: MITOOS

Ref: CXM153

€6.40

Mitoos STD-E adjustable shock absorbers with ball joint mounting, made from self-lubricating material for rally. Maximum distance between mountings of 27 mm and stroke of 9.5 mm, with hardness adjustment without the need to disassemble the suspension.

CXM152 Amortiguador Mitoos STD-E Regulable Horquilla Mitoos , Cartrix

Out-of-Stock

For axle

Mitoos STD-E Shock Absorber x2

Fabricante: MITOOS

Ref: CXM152

€4.35

Mitoos STD-E shock absorber pair with three-position hardness adjustment and fork H mounting. Made from self-lubricating material for low friction and high durability. Ideal for raid slot cars and trucks.

View

CXM151 Amortiguador Mitoos STD – Rótula «R» Mitoos , Cartrix

For axle

Mitoos STD Shock Absorber x2

Fabricante: MITOOS

Ref: CXM151

€4.29

Mitoos STD-R ball joint shock absorber pair, designed for rally cars and trucks. Self-lubricating material with low friction, travel of up to 9.5 mm and attachment via 3 mm clip. Robust and flexible for demanding competition sessions.

CXM150 Amortiguador Mitoos STD – Horquilla «H» Mitoos , Cartrix

For axle

Mitoos STD Shock Absorber x2

Fabricante: MITOOS

Ref: CXM150

€5.52

Mitoos STD shock absorber pair with H fork mounting, made from self-lubricating material for minimal friction and great durability. Maximum distance between mountings of 27 mm and damping travel of 9.5 mm. Perfect for rally cars and trucks.

CXM130 - Par de destornilladores 0.9 y 1.3 mm Cartrix Mitoos

Herramientas

Pair of screwdrivers 0.9 and 1.3 mm

Fabricante: MITOOS

Ref: CXM130

€11.14

Two Pro Allen screwdrivers of 0.9 and 1.3 mm with an aluminium handle and professional grip: the reference tool for the precise setup of your slot cars.

CXM129 - Mango de aluminio pro + punta Hex0.9 Cartrix Mitoos

Herramientas

Pro Allen Screwdriver. 2 Hex Tip. 1.3 mm

Fabricante: MITOOS

Ref: CXM129

€6.35

Precision tool with a 1.3 mm hexagonal tip, designed for adjusting and tuning Allen screws in slot cars, models, and miniatures. A reliable essential in the workbench of any discerning hobbyist.

Showing 193-216 of 653 item(s)