Anglewinder

We select brackets and supports for anglewinder setups with a focus on what truly matters on the track: alignment precision, proven materials, and compatibility with the most commonly used transmission groups in competition. Here you will find the specific component you are looking for, not just generic options.

Todos los productos Anglewinder

Soporte motor AWoffset 1.0mm duro - cojinetes EVO6
In Stock
Anglewinder

AW offset motor mount 1.0mm hard EVO6 bearings

Fabricante: SLOT.IT
Ref: SICH82B
€7.18
Slot.it anglewinder chassis in high hardness, with an offset of 1.0 mm and EVO6 bearings. Designed to mount the motor at the precise angle and extract maximum performance in 1/32 competition cars.
Anglewinder motor mount 0,5mm offset - EVO6 - HARD - bearing version
In Stock
Anglewinder

Anglewinder motor mount 0.5mm offset - EVO6 - HARD - bearing version

Fabricante: SLOT.IT
Ref: SICH118B2
€7.16
EVO6 anglewinder chassis from Slot.it in HARD version with bearings, designed to mount the motor with a 0.5 mm offset. Stiffness, precision, and low weight for those seeking maximum performance on track in 1/32 scale.
Bancada en ángulo EVO6 OFFSET 0,5 hard
Last items in stock
Anglewinder

SICH60B1 - Motor mount anglewinder 0.5mm offset (EVO 6) Hard bearings

Fabricante: SLOT.IT
Ref: SICH60b2
€7.16
Slot.it EVO 6 anglewinder chassis with 0.5 mm offset and Hard version bearings. Designed for those seeking a solid and geometrically precise base on which to build or fine-tune their drivetrain on Sport track.
Soporte motor ángulo offset 1.00mm
In Stock
Anglewinder

Motor mount offset angle 0.75mm

Fabricante: Avant Slot
Ref: AV20575c
€6.94
Avant Slot anglewinder chassis with an offset angle of 0.75 mm for 1/32 scale. A precision piece that allows for the adjustment of the motor position and optimises power transmission in competition setups.
Soporte motor rally angulo
In Stock
Anglewinder

Rally angle motor mount

Fabricante: Avant Slot
Ref: AV20575a
€6.94
Avant Slot anglewinder bracket with 0.00 mm offset for rally cars in 1/32 scale. Replacement part designed to maintain the exact geometry of the motor and ensure a clean and precise fit in your chassis.
Soporte motor ángulo offset 0.50mm
In Stock
Anglewinder

Motor mount offset angle 1.25mm

Fabricante: Avant Slot
Ref: av20575e
€6.94
Anglewinder motor mount with a 1.25 mm offset from Avant Slot, designed to precisely adjust the motor position in 1/32 setups. A key spare part for those looking to fine-tune the transmission geometry and squeeze every tenth on track.
Soporte motor ángulo offset 1.00mm
In Stock
Anglewinder

Offset angle motor mount 1.00mm

Fabricante: Avant Slot
Ref: av20575d
€6.94
Anglewinder motor mount with an offset angle of 1.00 mm from Avant Slot, designed for 1/32 scale. It allows for precise adjustment of the motor position and optimises the transmission in anglewinder configurations.
Soporte motor AW Rt4 Offset Ajustable
Last items in stock
Anglewinder

Motor mount offset angle 0.50mm

Fabricante: Avant Slot
Ref: av20575b
€6.94
Motor support anglewinder with an offset angle of 0.50 mm from Avant Slot, designed for 1/32 scale. It allows for precise adjustment of the motor position and optimises the power transmission to the rear axle in anglewinder setups.
Soporte Motor Flat Offset -1mm
Last items in stock
3D chassis, Fibre, Metal..

Ferrari F40 GTR chassis SLOT.IT- POLICAR

Fabricante: 3DSRP
Ref: SRP-001069
€13.60
Anglewinder chassis manufactured by 3DSRP in ASA plastic using FDM 3D printing, specifically designed for the Ferrari F40 GTR body in 1/32 scale, compatible with Slot.it and Policar mounts. A precise technical solution for those looking to prepare or customise their slot car with expertise.
Offset -0,70mm Soporte Motor
Anglewinder

Motor Mount Anglewinder Offset -0.70mm Sideways

Fabricante: Sideways
Ref: SWMAWGT3
€8.19
The anglewinder motor mount from Sideways with an offset of -0.70mm (ref. SWMAWGT3) allows for precise adjustment of the motor position in anglewinder configuration, fine-tuning the transmission geometry to maximise track performance.
Soporte de motor Offset 0,0mm Anglewinder EVO6
Last items in stock
Anglewinder

Angewinder Motor Mount Offset 0.0mm EVO6

Fabricante: SLOT.IT
Ref: SICH61C
€9.25
Slot.it Anglewinder EVO6 motor mount in carbon fibre, with an offset of 0.0mm. Designed for standard and Flat motors, it offers an angled motor position for optimal weight distribution in competition.
Separadores 3D cuna SC RT4
Out-of-Stock
1/32 spare parts

3D spacers cradle SC RT4

Fabricante: Ministry of Hobby
Ref: MH00625
€2.50
Six 3D spacers specifically designed for the SC-6531HD cradle from Scaleauto, with three different offset values (0.2, 0.3, and 0.5 mm) to fine-tune the motor position and achieve the best performance from your slot car.
View
Showing 25-36 of 107 item(s)
Product added to wishlist

Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Para dar su consentimiento sobre su uso pulse el botón Acepto.