3D Chassis NFS (Bicomp.) Porsche 992 GT (Bench/SLOT.IT)

The NFS Line chassis that takes the SCA Porsche 992 GT to another level

The SRP-NFS02 is the 3D chassis from the NFS Line of 3DSRP specifically designed for the SCA Porsche 992 GT body. Manufactured using FDM printing with a next-generation dual-component polymer, it combines in a single piece what the most demanding preparers seek in a competition chassis: low weight, measured flexibility, and structural solidity that withstands session after session.

Dual-component technology: what it brings in practice

The dual-component polymer is not just a simple rigid material. Its formulation combines two components with different properties to achieve a structure that behaves intelligently on the track:

• Greater lightness compared to conventional chassis, which reduces the total weight of the assembly and favours a more agile response in corners.
• Controlled flexibility that allows the chassis to absorb track irregularities without transmitting vibrations to the drivetrain or the body.
• Structural resistance to impacts and torsions, preventing permanent deformations even after accidents.
• Precise fit with the SCA Porsche 992 GT body, ensuring clean tilting without play that generates noise or premature wear.

Compatibility with Slot.it motor pods

One of the most valued aspects of this chassis is its design aimed at working with Slot.it motor pods. This opens up a wide range of mechanical configurations according to the driver's preferences and the type of race:

• Inline: motor perpendicular to the rear axle, in line with the car. Lowers the centre of gravity and favours stability in straights and braking.
• Sidewinder: motor parallel to the rear axle, with a very efficient direct transmission and a compact mass distribution.
• Anglewinder: motor angled with respect to the rear axle, a common solution to combine a low profile with efficient transmission.

The choice of configuration will depend on the circuit, the category regulations, and the driving style. The SRP-NFS02 chassis does not condition that decision: it facilitates it.

Assembly and preparation

The assembly process is straightforward for those already working with 3D printed chassis. It is advisable to check the support points with the body before the first final adjustment and ensure that the chosen pod is well seated. For the guide, we recommend using Sloting Plus guides or those from the 3DSRP brand itself, which ensure geometric compatibility with this type of chassis and offer optimal performance on Scalextric, Scaleauto, Ninco, or Carrera tracks.

Common mistakes to avoid

• Forcing the fit of the body without first checking the alignment of the pivots: this can generate unnecessary stresses in the polymer.
• Choosing a pod incompatible with the internal dimensions of the chassis: always check the Slot.it pod reference before assembly.
• Ignoring the tilting during adjustment: too rigid a tilting negates the advantages of the dual-component polymer on track.

Who is this chassis for?

The SRP-NFS02 is designed for the driver who already knows their material well and wants to build a competitive car from scratch or improve an existing setup. Whether you race in a club or prepare the car for demanding recreational use, the NFS Line from 3DSRP offers a serious technical base without sacrificing the configuration flexibility required for custom preparation.

Frequently asked questions

Which body is this chassis compatible with?

The SRP-NFS02 chassis is specifically designed for the SCA Porsche 992 GT body. Compatibility with other Porsche 992 bodies from different brands is not guaranteed.

Which Slot.it motor pods can I use with this chassis?

The chassis is compatible with Slot.it motor pods. To confirm the exact reference of the most suitable pod according to the configuration (Inline, Sidewinder, or Anglewinder), consult the technical information from 3DSRP or contact our team.

Which guide do you recommend mounting?

3DSRP recommends Sloting Plus guides or those from the 3DSRP brand itself to ensure geometric compatibility and the best performance on the track.

Is this chassis suitable for competition or just for recreational use?

The NFS Line from 3DSRP is oriented towards competition, so the SRP-NFS02 is perfectly valid for club racing. Check your championship regulations to verify that 3D printed chassis with dual-component polymer are allowed in your category.

Is the dual-component polymer fragile against impacts?

No. The dual-component formulation combines flexibility and structural resistance, so the chassis tolerates the usual impacts in racing without permanently deforming. Still, like any precision component, it is advisable to check the condition of the chassis after severe accidents.

Does it include a pod, motor, or any other component?

The product is exclusively the 3D chassis. The pod, motor, guide, and braids must be purchased separately according to the desired configuration.

The 3DSRP SRP-NFS02 is a high-performance 3D printed slot car chassis from the NFS Line, designed for the SCA Porsche 992 GT body. Made with an advanced dual-component polymer using FDM technology, it delivers an outstanding balance of lightweight construction, controlled flexibility and structural rigidity. Compatible with Slot.it motor pods, it supports Inline, Sidewinder and Anglewinder configurations, making it a versatile and competitive base for 1/32 scale slot car racing. Ideal for club racing and advanced home setups alike.