Scaleauto Lamborghini GT2 Two-Component Chassis (Slot.it Base) (NFS Line)

The NFS line from 3DSRP takes the Scaleauto Lamborghini GT2 to another level of preparation

The SRP-NFS04 is the bi-component chassis that 3DSRP has developed within its NFS line for those who want to get the most out of the Scaleauto Lamborghini GT2. 3D printed with a combination of materials of different densities, this chassis seeks to balance a rigid mechanical support with an outer frame that has just the right flex to adapt to track irregularities without losing stability or traction.

Function and performance of the bi-component system

The bi-component concept consists of using two distinct materials in a single piece: one more rigid for the areas that support the mechanics —mounting, rear axle, guide— and another more flexible for the structural perimeter of the chassis. The result is a more controlled dynamic behaviour in corners, with less tendency to bounce and a smoother rocking motion over the rails.

This design, characteristic of the NFS line from 3DSRP, also allows for optimising the total weight of the assembly, contributing to a lower centre of gravity without sacrificing strength against the stresses of competition.

Compatibility and mechanical configuration

The SRP-NFS04 chassis is designed to accommodate Slot.it motor pods, which opens up a wide range of mechanical configurations:

• Sidewinder: motor positioned parallel to the rear axle (transverse), common in setups aimed at traction and stability.
• Anglewinder: motor angled relative to the rear axle, a solution that combines a low centre of gravity with efficient transmission.
• Inline: motor perpendicular to the rear axle, in line with the car, which significantly lowers the centre of gravity.

The choice of configuration is left to the preparer according to the club regulations or the type of track —wood or plastic— on which they will compete.

As for the body, the chassis is compatible with the Scaleauto Lamborghini GT2 body, respecting its original mounting points and body lines.

Assembly and preparation

The front axle incorporates a regulation system using Allen screws that allows for precise adjustment of the support on the rail. This detail is particularly relevant on tracks with elevation changes or joints, as a well-calibrated front support reduces electrical contact loss and improves the vehicle's steering.

The mounting of the Slot.it pod is direct onto the designated anchors in the chassis, with no need for additional modifications. 3DSRP recommends checking the motor clearance and braid tension before the first running session.

Ideal for…

• Club competitors looking for a solid base on which to work on setup.
• Preparers already using Slot.it mechanics who want an optimised platform for the Scaleauto GT2.
• Enthusiasts who want to improve the track performance of their Lamborghini GT2 without resorting to irreversible modifications to the original body.

Aspects to consider

• This chassis does not include pod, motor, axle, wheels or body. Only the printed chassis is sold.
• The Slot.it pod and the rest of the mechanics must be purchased separately.
• As it is a 3D printed piece, it may have small manufacturing marks typical of the process, without affecting its functionality.

Frequently asked questions

Which body is this chassis compatible with?

The SRP-NFS04 is specifically designed for the Scaleauto Lamborghini GT2 body. Its compatibility with other bodies of the same scale has not been verified.

Which motor pod should I use?

The chassis is prepared to accommodate Slot.it motor pods. It supports Sidewinder, Anglewinder, and Inline configurations depending on the specific pod you choose.

Does the chassis include the pod or the motor?

No. The SRP-NFS04 includes only the printed chassis. The Slot.it pod, motor, rear axle, tyres, and guide must be purchased separately.

What does the bi-component system consist of?

The chassis combines two materials of different densities in a single piece: one rigid for the mechanical support areas and another more flexible for the structural perimeter. This improves the car's adaptation to track irregularities and reduces bounce in corners.

Is it suitable for wood and plastic tracks?

Yes. The geometry of the chassis and its front axle regulation system make it suitable for both types of surfaces. Fine adjustment of the front axle height is particularly useful on plastic tracks with more pronounced joints.

What is the NFS line within the 3DSRP catalogue?

The NFS (Need For Speed) line from 3DSRP groups together chassis developed with optimised geometries to reduce weight without compromising structural strength, especially designed for club competition.

3DSRP SRP-NFS04 bi-component chassis for Scaleauto Lamborghini GT2, compatible with Slot.it motor pods. Part of the NFS line, this 3D printed slot car chassis offers superior torsional control, adjustable front axle, and support for Sidewinder, Anglewinder and Inline configurations. Designed for 1/32 scale slot car racing on wood and plastic tracks.