Ultra Mirror Cup Level 1/3 OZ

Gravity Cup with Mirror Finish for Precision Airbrushing

The Gaahleri Ultra Mirror Level 1/3 OZ (ref. GA-41000) is an airbrush accessory designed for those who need to change colours quickly without sacrificing precision. Its gravity feed system channels paint directly into the mixing chamber, utilising the natural descent of the liquid, allowing for very low air pressure operation: a critical advantage when painting soft gradients, fine lines, or small parts in static models, figures, and dioramas.

Main Features

• Capacity 1/3 OZ: a volume designed for sessions with frequent colour changes. It fills just enough, empties just enough, and leaves minimal residue.
• Ultra Mirror Finish: the interior is polished to achieve an ultra-smooth mirror level that prevents paint adhesion to the walls. The practical result is a rinse in seconds, without the need for prolonged soaking or aggressive solvents.
• Gravity Feed: the pigment continuously descends towards the nozzle, ensuring a consistent flow even at reduced pressures and avoiding bubbles or interruptions in the stroke.
• Full Compatibility with Gaahleri Airbrushes: fits directly into the entire brand range without additional adapters.

Function and Performance

The mirror finish is not just an aesthetic issue: it reduces the actual contact surface between the paint and the cup wall, resulting in less dry residue between uses. In water-based paints such as those from Vallejo or Kaleido, this is particularly noticeable because acrylics tend to form a thin film in rougher finished containers. With the Ultra Mirror, that film simply does not form.

Moreover, the quicker cleaning between colours not only saves time: it extends the lifespan of the needle and nozzle by preventing dry residues from acting as abrasives during cleaning.

Recommended Applications

This cup is particularly suitable for disciplines that require frequent colour changes or meticulous detail work:

• Painting figures and miniatures with many base tones and shading.
• Lighting and zenithal highlights in static models where various greys or light colours are alternated.
• Application of filters and diluted washes in dioramas.
• Preshading and postshading work on competition model car bodies where control of paint volume is crucial.

Assembly and Maintenance

The cup attaches directly to the slot of the Gaahleri airbrush without tools. To get the most out of the mirror finish, a rinse with the appropriate solvent for the paint used immediately after each session is sufficient. It is not necessary to disassemble the entire set for each colour change: a quick rinse on-site is adequate in most cases.

Frequently Asked Questions

Is this cup compatible with airbrushes from other brands?

Gaahleri designs it for its own ecosystem of airbrushes. Before using it with another brand, it is advisable to check that the coupling system and thread diameter match, as not all brands share the same standard.

What real advantage does the mirror finish offer over a standard cup?

The ultra-smooth surface reduces paint adhesion, especially for water-based acrylics. The result is quicker cleaning, lower risk of clogs from dry residues, and a more consistent pigment flow during application.

Is the 1/3 OZ capacity sufficient for painting large parts?

It depends on the job. For large parts or backgrounds that require a lot of paint volume, it may be necessary to refill the cup several times. Its strength lies in detail sessions or jobs where multiple colours are alternated, where a smaller capacity facilitates managing the surplus.

Can I use this cup with solvent-based paints or lacquers?

The cup is manufactured for generic airbrush use. However, with solvent-based paints or aggressive lacquers, it is advisable to check the chemical resistance of the cup material. Refer to Gaahleri's specifications to confirm compatibility with each type of product.

Does the level indicated in the name ("Level") have any practical function?

The integrated level system allows you to check that the cup is correctly levelled during work, contributing to stable gravity flow and avoiding incorrect readings of the remaining paint volume.

The Gaahleri Ultra Mirror Level 1/3 OZ gravity cup (ref. GA-41000) is a precision airbrush accessory featuring an ultra-polished mirror interior finish that minimises paint adhesion for fast colour changes and consistent pigment flow. Ideal for scale modelling, static model kits, figures and dioramas, it pairs seamlessly with the full Gaahleri airbrush range. A practical upgrade for hobbyists seeking cleaner sessions and tighter control over fine detail work.