Masking tape 6mm

Precision to the millimetre: the 6 mm Tamiya masking tape that makes a difference in the final finish

When detail is everything, the quality of masking determines whether a separation line is flawless or ruins hours of work. The 6mm masking tape from Tamiya (ref. TA87030) is an essential tool on any modelling table, designed for those seeking sharp edges, no paint bleed, and no damage to previously applied layers upon removal.

Main features

• Width of 6 mm: a narrow format ideal for masking fine lines, tight two-colour separations, or small details on bodies, figures, and dioramas.
• Included tape dispenser: facilitates the storage of the roll and allows cutting the tape with one hand, streamlining the workflow in the workshop.
• Low aggressiveness adhesive: adheres firmly during painting and removes without pulling off paint layers or leaving adhesive residue.
• Tamiya manufacturing: one of the most valued references in the static modelling sector, with decades of trust among hobbyists and professionals.

Recommended applications

Its width of 6 mm makes it the preferred choice for work requiring fine masking:

• Colour separation on static scale model bodies.
• Delimitation of areas on figures and miniatures painted with airbrush or brush.
• Creation of geometric patterns or camouflage in dioramas.
• Protection of already painted areas during touch-ups with Tamiya, Vallejo, Kaleido, or Ammo paints.

Usage tips

To achieve the best results with this tape, consider these points:

1. Apply the tape on completely dry surfaces. If the previous paint has not fully cured, the risk of it lifting when removing the tape increases.
2. Press the edges of the tape firmly with your nail or a burnishing tool to prevent paint from seeping underneath.
3. Remove the tape at a 45° angle while the paint is still slightly wet, to achieve a cleaner edge.
4. Use the included tape dispenser to keep the roll clean and dust-free between sessions.

Frequently asked questions

What exactly is a 6 mm masking tape used for?

Its reduced width makes it perfect for masking narrow lines, very tight colour separations, or small areas of figures and bodies where a wider tape would be difficult to handle precisely.

Can it be used on dry acrylic or enamel paint?

Yes. The Tamiya tape is formulated not to damage cured paint layers, both acrylic and enamel. Still, we recommend ensuring that the paint has completely dried before applying it.

Does the tape dispenser come assembled or does it need to be put together?

It comes ready to use along with the roll of tape. Its design allows you to hold the dispenser with one hand and cut the tape easily, without the need for scissors.

Can it be used with an airbrush?

Perfectly. In fact, masking with Tamiya tape is especially effective when airbrushing, as the air pressure does not lift the edges if the tape is well adhered.

Are there other widths available for this same Tamiya tape?

Yes, Tamiya offers its masking tape in different widths. The 6 mm is the narrowest and most detailed in the range, perfectly complementing the 10, 18, or 40 mm versions depending on the area to be masked.

The Tamiya 6mm masking tape (TA87030) is a must-have tool for scale modelers, miniature painters and diorama builders seeking clean paint separation lines. Compatible with acrylic and enamel paints from leading brands, it delivers sharp edges without adhesive residue. Includes a handy tape dispenser for easy storage and single-handed cutting. A reliable choice for fine masking work in static models, figures and slot car bodywork painting.