Masking tape 10mm

Precision to the millimetre with Tamiya 10mm masking tape

When the final result depends on a perfect straight line or an impeccable colour transition, masking tape makes all the difference. The TA87034 reference from Tamiya offers a width of 10mm, one of the most versatile in the catalogue, ideal for masking large areas with parallel strips as well as for tracing smooth curves on bodies and complex surfaces.

Main features

• Width: 10mm, the perfect balance between control and coverage.
• Low residue adhesive: adheres firmly during the painting process and removes cleanly without damaging previous layers or leaving glue.
• Flexible material: adapts to curves and irregular surfaces without wrinkling or peeling at the edges.
• No dispenser: the roll comes without a dispenser. Suitable for use with the Tamiya tape dispenser (sold separately).
• Reference: TA87034.

Recommended applications and uses

This tape is particularly useful in a wide variety of situations within static modelling, figures, and dioramas, as well as in the preparation of slot car bodies:

• Delimiting two-tone stripes on car or motorcycle bodies.
• Masking glass areas, headlights, or window frames before applying primer or paint.
• Creating hard-edge camouflage on military vehicles or aircraft.
• Protecting already painted areas while working on adjacent zones.
• Combining with tapes of other widths from the same Tamiya catalogue for complex multi-layer masking.

Application tips

For the best results, apply the tape to a clean, dry, and dust-free surface. If the previous paint layer is less than 24 hours old, allow it to cure completely before applying the tape to avoid lifting. When removing it, do so at a 45° angle and slowly and continuously, especially over glossy finishes or recent varnishes. On sharp curves, cut small overlapping segments instead of trying to bend the roll in one go.

Compatible with leading paint brands

This tape is compatible with acrylics, enamels, and lacquers from leading brands in the industry: Tamiya, Vallejo, Kaleido, and Ammo, among others. It does not react with common solvents nor alters the painted surface when used correctly.

Frequently asked questions

Does this tape include a dispenser?

No. The TA87034 reference is sold as an individual roll, without a dispenser. The Tamiya tape dispenser is sold separately and is compatible with this format.

Can it be used on surfaces painted with Vallejo or Ammo acrylics?

Yes, as long as the paint has cured properly. If the layer is recent or very thin, it is advisable to wait at least 24 hours before applying the tape to avoid the adhesive lifting the colour upon removal.

Is the 10mm width suitable for masking slot car bodies?

Yes, it is one of the most commonly used widths for 1/32 and 1/24 slot car bodies due to its versatility: it allows for covering colour stripes, frames, and separations with a single strip and adapts well to the typical curves of these vehicles.

Can the tape be cut to obtain thinner widths?

Absolutely. With a cutter and a metal ruler or cutting mat, narrower strips can be obtained from the 10mm width, which is common for detail masking in figures or dioramas.

How long can the tape be left on without leaving residue?

Tamiya recommends not leaving the tape adhered for prolonged periods (more than 24-48 hours under normal conditions). The longer the exposure time or the higher the temperature, the greater the risk of the adhesive leaving a mark. Always remove the tape while the paint is still fresh, once applied, and before it is completely dry if working with acrylics.

The Tamiya 10mm masking tape (ref. TA87034) is a staple tool for scale modellers, diorama builders, and slot car enthusiasts seeking clean paint lines and flawless colour transitions. Compatible with acrylic, enamel, and lacquer paints from leading brands, this flexible low-tack tape delivers residue-free removal and precise edge definition on curved and flat surfaces alike. A must-have in any modelling workbench.