White Putty

Surface Preparation Without Compromise: Tamiya White Putty

When we seek a flawless finish in our models, the pre-painting work makes all the difference. The Tamiya White Putty TA87095 is the go-to resource for filling joints, correcting imperfections in plastic or resin, and preparing the surface for priming and painting with complete assurance.

Main Features

• Format: 32 g jar, manageable and with a good shelf life if kept well sealed.
• White colour, which facilitates visual detection of treated areas before sanding and painting.
• Dense and malleable texture, suitable for application with a spatula or modelling stick.
• Dries in the air, without the need for catalysts or special tools.
• Once cured, it sands easily with fine water sandpaper (from 400) without crumbling.
• Compatible with acrylic primers and paints, enamels, and lacquers commonly used in modelling.

Applications

This type of putty is particularly useful in the following situations:

• Sealing joint lines in injected plastic models.
• Filling bubbles or pores in resin parts.
• Correcting small defects or visible ejector marks.
• Preparing bases and stands in dioramas and miniatures.
• Small sculptures or detail modifications on existing parts.

Application Tips

Apply the putty with a spatula or modelling stick in thin layers, allowing it to dry completely between layers. It is not advisable to apply large volumes at once: better to do two or three thin passes than one thick one, as the putty tends to slightly contract when drying. Once sanded with damp water paper, clean the area well before priming. If we are going to paint directly on it, we recommend a layer of grey or white primer to ensure adhesion and detect any potential irregularities.

Ideal for…

Whether you are taking your first steps in static modelling or have been building high-demand figures or dioramas for years, Tamiya White Putty offers a reliable and predictable response. Its formulation is designed for comfortable use, without the prolonged curing times of other two-component compounds, making it a very practical daily tool on the modelling bench.

Frequently Asked Questions

How long does Tamiya White Putty take to dry?

Under normal temperature and humidity conditions, a thin layer can be ready to sand in a few hours. For thicker layers or in humid environments, it is advisable to wait longer or leave it to dry overnight before working on it.

Can it be thinned to refine the texture?

Yes, it can be thinned with lacquer thinner or with Tamiya's own lacquer thinner, allowing it to be applied in thinner layers or even with a brush for hard-to-reach areas.

Is it compatible with Tamiya, Vallejo, or Kaleido acrylic paints?

Generally yes, although we always recommend applying a primer layer before painting directly on the putty, regardless of the type of paint we are going to use. This ensures adhesion and avoids surprises.

Can it be used on resin as well as on plastic?

Yes, it works well on both materials. On resin, it is especially useful for filling pores or surface bubbles. Make sure to lightly sand the area to be treated to improve adhesion.

How do I keep the jar in good condition?

The most important thing is to close the lid tightly after each use. If the putty begins to harden inside the jar, it can be partially recovered by adding a few drops of lacquer thinner and carefully mixing.

Tamiya White Putty TA87095 (32 g) is a modelling compound designed to fill seams, sand marks and surface imperfections on plastic and resin kits. Easy to sand once cured and compatible with acrylic, enamel and lacquer paints, it is a reliable choice for scale model builders, figure painters and diorama creators looking for clean, professional results.