Complete suspension kit 006

The Thunderslot 006 Suspension Kit: all-in-one to keep your chassis in top condition

When it comes to serious tuning, the details make the difference. The Thunderslot Complete Suspension Kit 006 (ref. TH-SUSK006) brings together in a single pack all the necessary elements to assemble or replace the suspension system of the motor pod: 4 suspension stops, 5 foam washers, and 5 torx screws of 1.8×12 mm.

Kit Contents

• 4 suspension stops: define the travel of the assembly and prevent unwanted movement under load.
• 5 foam washers: absorb vibrations and provide the compliance needed for the motor to operate smoothly on the rear axle.
• 5 torx screws 1.8×12 mm: specific size for mounting on Thunderslot chassis, with a torx head for precise tightening without the risk of damaging the head.

Function and Performance

A well-adjusted suspension system allows the motor pod to have some controlled freedom of movement, resulting in better cornering traction, increased contact of the rear tyres with the track, and a more progressive response to acceleration changes. The foam washers are the key element: their hardness determines the behaviour of the suspension, and having original Thunderslot spares ensures that the factory specifications are exactly reproduced.

Assembly and Preparation

The assembly does not require special tools beyond a torx screwdriver of the appropriate size. It is advisable to regularly check the condition of the foam washers: with use, they become compressed and lose effectiveness, which is noticeable in a more erratic behaviour of the car on track. Replacing them with this original kit is the quickest way to restore the reference setup.

Compatibility

This kit is specifically designed for Thunderslot chassis that incorporate a motor pod with a suspension system. If you have doubts about whether your specific model is compatible, check the reference of your chassis in the official Thunderslot documentation or contact our team.

Common Mistakes

• Over-tightening the torx screws: this locks the suspension movement and nullifies its effect. The tightening should be firm but allow for some controlled freedom.
• Mixing foam washers of different hardnesses without criteria: this can create asymmetric behaviour of the motor pod.
• Not replacing all elements at once: if the foam is worn in several places, the most efficient approach is to renew the complete set, which is exactly what this kit offers.

Frequently Asked Questions

What are the foam washers for in the motor pod suspension?

They act as an elastic element that allows the motor pod to move slightly in a controlled manner. This improves traction by absorbing track irregularities and softens the response to sudden accelerations.

How often should I renew the foam washers?

It depends on usage. In intense competition sessions, it may be advisable to check them after each season or when you notice that the car has lost traction or stability without any apparent cause. For recreational use, periodic visual inspection is sufficient.

Can I use screws from another brand or size?

It is not recommended. The included torx screws 1.8×12 mm are calibrated for original Thunderslot mounting. Using screws of different length or pitch may damage the chassis fittings or not provide the correct tightening.

Does this kit include all the elements to assemble the suspension from scratch?

It includes the stops, foam washers, and screws. If the motor pod itself is damaged, you will need to purchase it separately. For a complete renewal of the suspension system, this kit covers all consumables.

Is it compatible with chassis from other brands?

This kit is specifically developed for Thunderslot chassis. Compatibility with chassis from other brands is not guaranteed, as measurements and tolerances may vary.

The Thunderslot Complete Suspension Kit 006 (ref. TH-SUSK006) is a full replacement set for motor pod suspension systems, including 4 suspension stops, 5 foam washers, and 5 torx 1.8×12 mm screws. Designed for Thunderslot chassis, it ensures precise motor pod movement for improved traction and consistent lap times. Essential spare part for slot car tuning and setup.