Neodymium magnet for magnetic suspension 4x1.0mm

The magnet that works where it matters most: at the heart of magnetic suspension

The Slot.it SICN08 is a 4×1.0 mm neodymium magnet designed to integrate into magnetic suspension systems in competitive slot cars. Its compact geometry and controlled magnetic power make it a reference piece when tuning chassis that incorporate this type of suspension.

Function and performance

Neodymium magnets are the standard in precision applications within slot preparation: they offer a much higher force-to-size ratio than conventional ferrite magnets, allowing for the use of components with minimal dimensions without sacrificing effectiveness. In the context of magnetic suspension, their role is to provide the necessary holding force or damping effect for the system to operate coherently and repeatedly during the race.

• Material: neodymium (NdFeB)
• Dimensions: 4×1.0 mm
• Application: magnetic suspension in slot chassis
• Slot.it Reference: SICN08

Compatibility and installation

This magnet is specifically designed for the magnetic suspension systems developed by Slot.it. If you are working with a chassis from the brand that incorporates this type of suspension, the SICN08 is the correct replacement or spare part. Before replacing it, check the polarity orientation: a magnet mounted the wrong way can negate the suspension effect or cause erratic chassis behaviour.

Given its reduced width (1.0 mm), it is recommended to handle it with non-magnetic fine-tipped tweezers to avoid unintentional displacements during installation.

Ideal for…

This component is aimed at experienced tuners and enthusiasts working on the fine-tuning of their slot cars. If you participate in club championships or seek to extract the maximum dynamic performance from your car on the Sport track, having stock parts like this makes the difference between finishing the day with a well-tuned car or wasting time searching for a replacement.

Considerations

• Handle with care: small neodymium magnets are fragile against impacts between metal parts.
• Keep away from magnetic cards, sensitive electronic devices, and other loose magnets.
• Respect the original polarity of the system during installation.

Frequently asked questions

Which Slot.it chassis or cars is this magnet compatible with?

The SICN08 is designed for the magnetic suspension systems of Slot.it. Check your chassis documentation or the exploded diagram of your car to confirm that it uses magnets of this reference before proceeding with the installation.

Can I use this magnet in other brands or suspension systems?

In principle, it is a specific component for Slot.it, but its dimensions (4×1.0 mm) could match those of other systems. We recommend always checking the specifications from the chassis manufacturer before attempting to adapt it.

What is the difference between a neodymium magnet and a ferrite one?

Neodymium magnets offer significantly greater magnetic force for the same size compared to ferrite ones. In precision applications like slot magnetic suspension, this allows for the use of very small components while maintaining system effectiveness.

How do I know if the magnet is mounted with the correct polarity?

If after installation the suspension does not respond as it should or the chassis behaviour is inconsistent, it is likely that the magnet is inverted. Remove it with tweezers, rotate it 180°, and reinsert it. Consult the Slot.it installation diagram if you have any doubts.

Is it sold individually or in a pack?

Check the updated product sheet at Ministry of Hobby to know the exact contents of the packaging, as it may vary depending on the available batch.

The Slot.it SICN08 is a 4×1.0 mm neodymium magnet specifically designed for magnetic suspension systems in slot car chassis. A go-to spare part for experienced slot car builders and club racers looking to maintain or fine-tune their Slot.it setups. Available at Ministry of Hobby, your specialist in slot cars, scale models, and high-end collectibles.