Neodymium magnet 25x8x4 oxigen x2

Slot.it Neodymium Magnets for Oxigen Chassis: Precise Grip, Controlled Run

Neodymium magnets are one of those components that make the difference between a car that slides in corners and one that sticks to the track with precision. This pack includes 2 neodymium magnets measuring 25x8x4 mm, reference SICN11b, manufactured by Slot.it and designed for use in Oxigen chassis.

Function and Performance

The magnet in a slot car serves a critical function: generating the electromagnetic grip force that keeps the car glued to the track, especially in tight corners and sharp direction changes. A well-sized magnet for the chassis prevents both grip loss and excessive stiffness that penalises track performance.

Slot.it neodymium magnets offer a very efficient force-to-size ratio, with a stable magnetic force that does not degrade with the heat typically generated during prolonged running sessions. The dimensions 25x8x4 mm are tailored to fit the housing space of the Oxigen chassis, ensuring that the magnetic field acts at the exact point of the distance from the track.

Compatibility

These magnets are designed for Oxigen chassis compatible with Sport track (Scaleauto, Slot.it). Their specific geometry ensures a correct fit in the designated housings for this reference. Always check that the dimensions match those of your specific model's housing before replacing the original magnets in your chassis.

Installation and Preparation

• Carefully remove the used magnet: neodymium magnets are fragile to impacts and can chip if forced sideways.
• Clean the housing before installing the new magnet to ensure a flat and even contact.
• Respect the polarity: place the magnet with the correct face towards the track. If the car loses grip after replacement, try turning it 180°.
• Do not expose the magnets to high temperatures outside the track or bring them close to other sensitive electronic components.

Ideal for…

Whether you compete in a club and need to replace worn magnets to maintain optimal grip, or you are building an Oxigen chassis from scratch, this pack of 2 units allows you to always have a spare ready. Having magnets in good condition is one of the easiest variables to control in the setup of a slot car.

Frequently Asked Questions

Do these magnets work for any Slot.it chassis?

Not necessarily. The dimensions 25x8x4 mm correspond to a specific reference for Oxigen chassis. Other Slot.it chassis may require magnets of different dimensions. Always check your chassis specifications before ordering.

How many units are included in the pack?

The pack includes 2 neodymium magnets measuring 25x8x4 mm.

Can I use these magnets on Scalextric or Ninco track (universal track)?

The magnet itself is not limited by the type of track, but these magnets are sized for Oxigen chassis, which is optimised for Sport track. If you use the Oxigen chassis on universal track, the performance may vary from the intended use.

Do neodymium magnets lose strength over time?

Neodymium magnets are very magnetically stable under normal usage conditions. Their main risk is physical: an impact can chip or fracture them, which does reduce their performance. Replace them if you notice cracks or if the car's grip has decreased without any apparent cause.

Does the magnet affect the car's motor or electronics?

When installed correctly in its housing, the magnet does not interfere with the motor or other components. Avoid bringing loose magnets close to digital chips or decoders during handling.

Slot.it SICN11b neodymium magnets 25x8x4 mm for Oxigen chassis — pack of 2 units. High-performance slot car magnets engineered for Sport track systems, offering consistent downforce and reliable grip for club racing and competitive slot car setups. A must-have spare part for any Oxigen chassis build or maintenance.