FERRARI RED 18ml

The Ferrari Red 71085 from Acrylicos Vallejo: chromatic precision for modelling and slot cars

Within the Model Air range from Vallejo, the 71085 Ferrari Red is one of those colours that needs no introduction among modelling and slot enthusiasts. Specifically formulated for airbrush use, it faithfully reproduces the characteristic red of Scuderia Ferrari, a shade that any motorsport follower instantly recognises. Its water-based acrylic base, with ultra-fine pigment and matte finish, makes it a solid reference for both static models and slot car bodies or figures and dioramas.

Applications

The Ferrari Red 71085 is optimised for airbrush application, but its fluidity also allows for fine brush work for touch-ups and specific details. It can be applied directly or thinned with Airbrush Thinner or Flow Improver from Vallejo according to the needs of each technique. It is particularly useful for:

• Slot car bodies inspired by Ferrari single-seaters or GTs.
• Static models of racing cars in any scale.
• Figures and dioramas where vibrant red requires clean, streak-free coverage.
• Touching up parts or correcting dents on already painted models.

Compatibility

As a water-based acrylic paint, the 71085 is compatible with other references in the Model Air range and integrates seamlessly with varnishes, primers, and auxiliary products from Vallejo. It can also be combined with paints from other leading brands such as Tamiya or Ammo, always respecting the acrylic base and conducting a prior adhesion test. For best results, it is recommended to apply it over a previously primed surface.

Finishes

The finish is matte, which facilitates the subsequent application of satin or gloss varnishes depending on the desired effect. The film formed after curing is resistant to handling, without the colour losing saturation or the surface detail being compromised. The resulting red is vibrant, well-covered, and has the necessary chromatic depth to represent racing lacquers.

Application Tips

• For airbrush, it is recommended to work with a pressure of between 15 and 20 PSI (0.5 to 1 kg) and to apply several thin layers instead of one thick layer.
• If the paint is too thick, dilute it with Airbrush Thinner or Flow Improver from Vallejo in small proportions.
• The 18 ml dropper bottle allows for dosing minimal amounts, avoiding waste and premature drying of the product.
• After each session, clean the airbrush with Vallejo Airbrush Cleaner to prolong the lifespan of the equipment.
• Store the bottle tightly closed, away from direct heat sources, to maintain the product's consistency for a long time.
• The product contains substances that may cause allergic reactions; always consult the label instructions and work in a ventilated space.

Frequently Asked Questions

Do I need to dilute Vallejo Model Air 71085 before using it with the airbrush?

It is not strictly necessary: the Model Air range is formulated to be used directly with an airbrush without dilution. If at any point you find the consistency too thick for your equipment, you can add a few drops of Airbrush Thinner or Flow Improver from Vallejo until you achieve the desired fluidity.

Can it be applied with a brush or only with an airbrush?

Although it is optimised for airbrush use, its fluidity allows for fine brush work for specific touch-ups or small details. For large surfaces, the airbrush remains the best option for achieving uniform coverage without brush marks.

On what surfaces does it work best?

It works on any properly primed surface: plastic, resin, white metal, or polyurethane. Applying a prior primer significantly improves adhesion and the uniformity of the final colour.

Is the finish glossy or matte?

The finish is matte. If you are looking for the typical glossy lacquer effect of racing cars, apply a glossy acrylic varnish on top once the paint has fully cured.

Is it compatible with other acrylic paints on the market?

Generally, yes, as long as they are water-based acrylics. Direct mixing with paints from other brands is possible, although we recommend always conducting a prior test on a waste surface to verify adhesion and the resulting tone.

How long does it take to dry?

Touch dry is quick, within a few minutes under normal conditions. For complete and resistant curing before handling the piece or applying additional layers, it is advisable to wait several hours.

Vallejo Model Air 71085 Ferrari Red acrylic paint, 18ml dropper bottle, airbrush-ready matte finish, fine pigment formula for slot car bodies, scale models, figures and dioramas. Water-based acrylic, fast drying, high coverage, compatible with Vallejo auxiliaries. Ideal for competition car modelling and slot racing hobby painters seeking accurate Ferrari livery colours.