M2 X 3 Allen screws 0.95 front axle F 1

The right screw for each point of the NSR F1 chassis

When working with the precision required by an NSR F1 chassis, every component matters, including the screws. The M2x3 0.95 Allen Screws for F1 front axle (ref. NSR4863) are designed to fit exactly where they should: on the front axle of NSR F1 chassis, ensuring a secure tightening without compromising the geometry of the assembly.

Function and features

These M2 metric Allen screws with a length of 3 mm and a thread pitch of 0.95 are the original NSR replacement for the front axle of their Formula 1 chassis. Their Allen head allows for controlled tightening with a hex key, reducing the risk of damaging the part when handling it on the bench.

• Metric: M2
• Length: 3 mm
• Thread pitch: 0.95
• Head type: Allen (internal hex)
• Application: front axle of NSR F1 chassis

Compatibility

Specific to NSR Formula 1 chassis. If you have doubts about whether they fit your specific model, consult the assembly manual for your chassis or compare them with the original screws before proceeding.

Assembly and recommendations

Always use the correct size Allen key to avoid rounding the head. For screws of this scale, the right tightening is crucial: too much adjustment can deform the plastic or metal housing; too loose compromises the stability of the axle. If using thread lock, apply a minimal amount to avoid obstructing future disassembly.

Having a small stock of these screws in your workshop drawer is a smart decision: they are wear parts that should be replaced before they fail at the most inconvenient time.

Frequently asked questions

How many screws are included in the NSR4863 pack?

The information provided by the manufacturer does not specify the exact number of units per pack. We recommend checking the product listing or contacting our team to confirm before placing your order.

Are they valid for other NSR chassis besides F1?

They are specifically designed for the front axle of NSR F1 chassis. They may fit other applications with the same M2 metric and 0.95 pitch, but it is always advisable to verify with the chassis in hand before forcing the assembly.

What Allen key do I need for these screws?

As they are M2 screws, the corresponding Allen key is generally 1.5 mm. Check with your set of keys before intervening to avoid damaging the head.

Can I replace them with generic M2x3 screws?

In principle, any M2x3 screw with a 0.95 pitch and Allen head should be dimensionally compatible. However, the original NSR screws are designed to work with the housings and tolerances of their own parts, so the original replacement is always the safest option.

NSR Allen screws M2x3 0.95 for F1 front axle, reference NSR4863. Original spare part for NSR F1 chassis, these hex socket screws ensure a precise and reliable fit for slot car builders and club racers who demand accurate setup on every single component. Available at Ministry of Hobby, your reference store for slot car parts and accessories.