2 basic R5 Classic wheels 16.7x5.7

R5 Classic Basic Wheels 16.7x5.7: essential replacement for your rolling chassis

Sometimes the most discreet details are what make the difference between a car that runs with precision and one that vibrates or loses traction. These R5 Classic Basic wheels in size 16.7x5.7 mm (reference CXM025) offer exactly what you need: a solid and well-dimensioned base on which to mount your tyres and keep the rolling chassis in perfect condition.

The pack includes 2 wheels, sufficient to renew the rear or front axle of your car depending on the application.

Features and function

• Dimensions: 16.7 mm diameter x 5.7 mm width.
• R5 Classic Basic format: standard design aimed at compatibility and use in club or recreational setups.
• Pack of 2 units, ready to mount.

Mounting and preparation

Before mounting the tyres, it is advisable to check that the axle diameter is compatible with the wheel hub. A correct fit avoids play and ensures that the assembly runs without eccentricities. If you use glue to secure the tyre, apply a minimal amount and allow it to cure well before turning or adjusting on track.

To achieve the best performance, we recommend turning the tyre once mounted on the wheel, so that the diameter is perfectly concentric with respect to the axle.

Common mistakes when changing wheels

• Not verifying that the wheel sits correctly on the axle before gluing the tyre.
• Using too much adhesive, which can unbalance the assembly due to excess material.
• Not turning after mounting, resulting in a slight eccentricity that translates into vibration at high speeds.

Frequently asked questions

How many wheels does the pack include?

The CXM025 pack includes 2 R5 Classic Basic wheels measuring 16.7x5.7 mm.

Which axle are they intended for, front or rear?

The dimensions 16.7x5.7 mm are typical for applications on the rear axle in many slot car setups, although specific compatibility always depends on the car and the preparation. Check the diameter of your axle before installing them.

Do I need to turn the tyre after mounting it?

For competition or when maximum rolling precision is sought, yes. Turning eliminates any residual eccentricity and improves the tyre's contact with the track.

What adhesive do you recommend for securing the tyre to the wheel?

A low-viscosity cyanoacrylate adhesive applied in small amounts usually yields good results. Avoid excesses that could unbalance the assembly.

The CXM025 pack contains 2 R5 Classic Basic slot car wheels measuring 16.7x5.7 mm, ideal for replacing or upgrading the wheel set on your slot car. A straightforward yet precise spare part for club racers and hobby enthusiasts looking to keep their rolling chassis in top condition.