Heavy aluminium wheels 19x10 mm (raid)

PKS417 Wheels: Heavy Aluminium 19x10 mm for Raid Slot Applications

The PKS417 wheels from the PKS brand are made of aluminium with a 19x10 mm profile and a deliberately increased weight, designed for raid type setups in slot racing. This type of wheel meets the needs of those preparing cars aimed at regularity and stability on demanding sections, where cornering behaviour and constant traction make a difference.

Main Features

• Material: machined aluminium.
• Dimensions: 19 mm diameter × 10 mm width.
• Heavy design: increased rotational mass for added inertia and stability.
• Specific application: raid in slot racing.
• Reference: PKS417.

Function and Performance

In the world of slot raid, mass balance and directional stability are critical factors. A heavier wheel favours the inertia of the rolling assembly, resulting in a more predictable response on low-grip sections or uneven surfaces, common in raid circuits. Aluminium, compared to other materials, offers a combination of rigidity and specific weight that is highly valued in competition setups.

Installation and Preparation

Before installation, it is advisable to check the centring of the wheel on the axle to avoid vibrations. Proper balancing of the wheel-tyre assembly will directly enhance the car's stability on track. If you are using these wheels in a competition setup, be mindful of your club's regulations regarding weight limits per axle.

Ideal for…

Slot raid preparers and competitors looking to provide their setups with greater stability and inertia. They are also interesting for those experimenting with weight setups on the rear or front axle, aiming to adjust the car's behaviour to the characteristics of the circuit.

Considerations

The increased weight of these wheels raises the total mass of the car. Depending on the competition regulations or the desired balance, it may be advisable to compensate for this increase by adjusting other chassis elements. Always consult your championship rules before homologating the setup.

Frequently Asked Questions

What is the difference between a heavy wheel and a standard one?

A heavy wheel has greater mass, which increases the inertia of the rolling assembly. This can improve stability on uneven surfaces or in raid cars that require a smoother and more predictable behaviour.

Which tyres are compatible with these 19x10 mm wheels?

They are compatible with tyres designed for 19 mm diameter and 10 mm width wheels. Check the PKS catalogue or other slot raid tyre manufacturers to find the correct fit.

Does the increased weight of the wheel affect motor consumption?

Yes, greater rotational mass may demand slightly more from the motor, especially during accelerations. It is a factor to consider when choosing the motor and gear ratio to optimise the car's overall performance.

Can these aluminium wheels be balanced?

Yes, machined aluminium allows for precise balancing. It is recommended to check the centring and, if necessary, lightly turn the wheel mounted on the axle to ensure perfect concentricity.

Are they valid for official slot raid competition?

It depends on the regulations of each championship or club. Before using them in competition, consult the specific rules regarding weight, dimensions, and materials allowed in your category.

PKS417 heavy aluminium wheels 19x10 mm for raid slot cars. Designed to increase rotational mass and improve stability on demanding raid circuits. Compatible with 19 mm diameter tyres. Ideal for slot raid racing builders and competitors looking for a more planted and consistent setup on mixed or abrasive surfaces.