Offset Motor Mount 0.5mm Angewinder Carbon EVO6 Bearing

The Slot.it Carbon EVO6 Anglewinder Mount: Workshop Precision in Every Assembly

The SICH118c1 is the Anglewinder Carbon EVO6 motor mount from Slot.it with an offset of 0.5 mm and includes bearings. Within Slot.it's anglewinder spare parts catalogue, this carbon mount represents the most refined option for those who adjust their drivetrain geometry to the millimetre.

Function and Performance

In an anglewinder configuration, the motor is positioned at an angle relative to the rear axle, allowing for a low centre of gravity combined with efficient transmission. The mount is the component that secures and orients the motor in that position, and any variation in its geometry directly affects the alignment of the pinion and crown gear, the play in the transmission, and ultimately the consistency of lap times on track.

The 0.5 mm offset laterally displaces the motor shaft from the neutral position, allowing for precise adjustment of the drivetrain centring according to the chassis and the pinion-crown gear combination being used. Having bearings integrated into the mount reduces friction and improves the stability of the assembly under load.

Material: Carbon EVO6

The carbon fibre construction of the EVO6 series offers two clear advantages over conventional plastic mounts: greater rigidity against motor vibrations and reduced weight. In competition, both properties translate into a cleaner transmission and less variability between laps, especially in high-speed sections or when the car is operating at the limit of traction.

Compatibility and Assembly

This mount is part of Slot.it's anglewinder spare parts system and is designed to fit the brand's chassis compatible with the EVO6 family. Before installation, it is advisable to verify that the 0.5 mm offset is suitable for your pinion, crown gear, and chassis combination, as Slot.it offers different offset values within its range to fine-tune each configuration to the maximum.

• Carbon motor mount, EVO6 series.
• Configuration: anglewinder.
• Offset: 0.5 mm.
• Includes bearings.
• Scale 1/32.
• Reference: SICH118c1.

Common Errors When Installing an Anglewinder Mount

The most common mistake is not checking the play between the pinion and crown gear after installing the mount. An incorrect offset or an installation with excessive play generates noise, premature wear, and loss of power. It is also advisable to check that the bearings rotate freely and without noise before closing the chassis, to avoid unnecessary disassemblies during the session.

Frequently Asked Questions

What is the difference between the different offset values in Slot.it mounts?

The offset indicates the lateral displacement of the motor shaft. Different values allow for correct alignment of the transmission according to the diameter of the pinion, crown gear, and chassis dimensions. Using the appropriate offset is essential for achieving smooth engagement without vibrations.

Do the bearings come pre-installed in the mount?

Yes, the SICH118c1 includes integrated bearings, so there is no need to purchase them separately for this mount.

Is it compatible with chassis other than Slot.it?

The mount is designed for the Slot.it EVO6 chassis system. Compatibility with chassis from other brands depends on whether they share the same mounting dimensions; it is recommended to verify this before installation.

Why choose carbon over a plastic mount?

Carbon offers greater rigidity, which minimises micro-flexing during operation and maintains constant alignment of the transmission. Additionally, its lower weight helps reduce the unsprung mass of the motor-transmission assembly.

Do I need special tools to install it?

The installation follows the standard procedure for Slot.it mounts. It does not require special tools, although it is advisable to use a gauge to check the play of the transmission once installed.

The Slot.it SICH118c1 is a Carbon EVO6 Anglewinder motor mount with a 0.5 mm offset and integrated bearings, designed for 1/32 scale slot car racing. Part of Slot.it's precision anglewinder spare parts range, it delivers exceptional rigidity and low weight for competitive setups. Compatible with Slot.it EVO6 chassis systems and ideal for club racers and hobbyists seeking fine-tuned drivetrain geometry in anglewinder configurations.