AW EVO2 Hard White motor cradle

The NSR AW EVO2 Hard White Pod: Rigidity and Precision for Anglewinder Setups

When it comes to serious slot preparation, the small details make the difference between a car that runs well and one that runs perfectly. The AW EVO2 Hard White motor pod from NSR, reference NSR1226, is one of those components that, once installed, is immediately noticeable: firm motor support, impeccable alignment, and a power transmission that is not compromised by play or unnecessary vibrations.

Main Features

• Specifically designed for anglewinder configuration: the motor is mounted at an angle to the rear axle, allowing for optimised weight distribution and a lower centre of gravity compared to other configurations.
• Hard version: made from a stiffer material that reduces flex in the pod during driving, improving consistency in transmission and car response.
• Finished in white, easily identifiable within the NSR pod catalogue to avoid confusion during assembly or in the box.
• Compatible with the range of NSR motors and the brand's chassis that support this configuration.
• EVO2 design: evolution of NSR's original mounting system, with improvements in the fit and stability of the motor-pod assembly.

Recommended Applications

This pod is designed for drivers looking to maximise the performance of their NSR cars in anglewinder configuration, whether in club competition or in a more recreational setup aimed at consistency. The Hard version is especially recommended when working with higher torque motors or on high-speed tracks where the rigidity of the assembly is crucial to maintain line and avoid power loss due to flex.

Behaviour and Performance

A well-chosen pod is the foundation of the entire transmission system. The Hard version of the EVO2 offers a more direct behaviour: the motor does not "work" against the pod, resulting in a cleaner response when accelerating and a noticeable reduction in mechanical noise. For those seeking a more docile setup or greater absorption of track imperfections, the softer material version may be an alternative to consider; but if the goal is pure performance, the Hard is the natural choice.

Assembly and Preparation

Assembly is straightforward and follows the standard process for NSR pods. It is advisable to check the alignment of the motor with the crown gear and pinion before permanently securing the pod, as a slight deviation in angle can generate noise and premature wear on the gear. It is recommended to perform an initial run with the car raised to detect any play or rubbing before putting it on the track.

Frequently Asked Questions

What is the difference between the Hard version and other versions of the EVO2 pod?

The main difference is the rigidity of the material. The Hard version reduces flex in the pod under load, improving transmission consistency and is especially useful with high-performance motors or in competition. Other softer versions better absorb track irregularities but may introduce slightly more variability in response.

Is it compatible with all NSR chassis?

It is designed for NSR chassis that support anglewinder configuration. It is advisable to check compatibility with the specific chassis you are using by consulting the NSR catalogue or contacting us before placing your order.

What is anglewinder configuration and what advantages does it offer?

In anglewinder configuration, the motor is positioned at an angle to the rear axle of the car. This allows for a more favourable weight distribution and a lower centre of gravity, improving cornering stability compared to sidewinder configuration (motor parallel to the axle) and inline configuration (motor in line, perpendicular to the axle).

Do I need special tools to install this pod?

No special tools are needed beyond the usual ones for slot preparation: precision screwdrivers and, optionally, a mounting bench to check the alignment of the motor-transmission assembly before final adjustment.

Is the pod ready to use or does it require any prior adjustment?

The pod comes ready for direct installation. However, as with any preparation component, we recommend checking the alignment of the motor with the transmission before first use on the track to ensure maximum performance and durability.

The NSR1226 AW EVO2 Hard White motor pod is a precision anglewinder motor mount designed for NSR slot car chassis. Its hard compound construction minimises flex and ensures consistent power transfer, making it a top choice for club racers and performance-oriented hobbyists. Compatible with NSR anglewinder setups, this motor pod is an essential upgrade for those seeking reliable transmission and improved lap consistency on any track layout.