Metric screws ERGAL 2.2x13mm large head x4

Slot.it ERGAL 2.2x13mm Large Head Bench Screws: Italian Precision for Your 1/32 Chassis

Slot.it is one of the absolute benchmark brands in the 1/32 slot racing world, and this demand extends even to the smallest elements of the assembly. These 2.2x13mm metric ERGAL screws with a large head (ref. SICH135) are the perfect example: bench pieces designed to ensure a firm, precise, and repeatable assembly on the brand's chassis.

Function and Features

• Size: 2.2 x 13 mm, metric.
• Head: large, for greater support surface and better pressure distribution on the chassis.
• Material: ERGAL, a high-strength aluminium alloy widely used in competition applications due to its excellent strength-to-weight ratio.
• Quantity: pack of 4 units.
• Category: bench screws for 1/32 scale.

Why Material Matters in a Bench Screw

In a slot car prepared for competition, every gram counts, and every joint point of the chassis must remain stable throughout the session. ERGAL, common in model car and motorsport components, offers superior stiffness compared to conventional steel relative to its weight, reducing vibrations and maintaining the chassis geometry unchanged race after race.

The large head of these screws adds another advantage: it distributes the load better across the bench, preventing deformation in the chassis plastic over time and facilitating tightening with the appropriate tool without the risk of slipping.

Installation and Preparation

These screws are designed for use with Slot.it chassis and pods within the Sport track system. Before installing them, ensure that the threaded housing is clean and free of lubricant or dirt residues. Apply the correct torque: ERGAL is strong, but like any small metric screw in precision applications, excessive tightening can damage the thread of the plastic or the metal insert of the chassis.

If you frequently disassemble during preparation sessions or competition, it is good practice to always have a spare pack like this to replace any screw that shows wear on the head or thread.

Compatibility

Bench screws specifically for Slot.it chassis in 1/32 scale. To confirm the exact compatibility with your chassis or pod model, consult the parts diagram of your set on the official Slot.it website or contact us.

Frequently Asked Questions

What is ERGAL and why is it used in slot screws?

ERGAL is a high-strength aluminium alloy (usually the 7075 series) widely used in aerospace and motorsport. In slot racing, it is used for its excellent strength-to-weight ratio: the screw is lightweight but withstands tightening forces and track vibrations well.

Are these screws suitable for any Slot.it chassis?

They are designed for the range of Slot.it 1/32 pods and chassis. We recommend consulting the specific parts breakdown of your chassis to confirm that the size 2.2x13mm and the large head type are correct for your specific application.

How many units are included in the pack?

The SICH135 pack includes 4 metric ERGAL 2.2x13mm large head screws.

What tool is needed for installation?

As these are metric screws with a large head, you will need the appropriate wrench or screwdriver for this specific screw head. Consult the technical documentation from Slot.it for the exact recommended size.

Is it necessary to use any thread locker?

In competition applications where the car experiences constant vibrations, some preparers opt to apply a minimal amount of low-strength thread locker to prevent the screw from loosening. It is not mandatory, but it can be useful in intensive use.

Slot.it SICH135 — set of 4 ERGAL metric screws 2.2x13mm large head, designed as chassis mounting hardware for 1/32 scale slot cars. Lightweight high-strength aluminium alloy construction for reliable assembly on Slot.it chassis and pod systems. Essential spare part for club racers and slot car enthusiasts running Slot.it setups on Sport track.