Best sellers

Todos los productos

Muelle blando para guia desplazamiento vertical

Springs

4 x Soft spring for vertical displacement guide

Fabricante: Tectime

Ref: TT900

€2.80

Four soft hardness springs designed by Tectime for vertical displacement guides. They allow for smooth movement and precise return to the resting position when the car runs on the track. Blister pack of 4 units.

Springs

4 x Soft guide spring + vertical displacement spiral

Fabricante: Tectime

Ref: TT901

€2.80

Four soft Tectime TT901 springs, slightly longer than the TT900 and with more coils, designed to achieve an extraordinarily smooth extension and compression of the guide, preventing that movement from being transmitted to the chassis and keeping the guide in constant contact with the track.

Bronze

8-tooth pinion 5mm diameter LONG 1

Fabricante: Tectime

Ref: M-PC001

€2.40

8-tooth pinion with a 5 mm diameter shaft in LONG 1 version, designed for motors in anglewinder configuration. Its greater length facilitates adjustment with the crown gear regardless of its protrusion, ideal for competition setups in the rally category.

M-CR001S - 24 Separadores para eje de 0,5 / 1 /1,5 / 2 / 2,5 / 3,0 mm - de Mustang Slot

Spacers

24 x axle spacers of 0.5 / 1 / 1.5 / 2 / 2.5 and 3mm

Fabricante: Tectime

Ref: M-CR001S

€2.33

Set of 24 Mustang spacers (ref. M-CR001S) in six different thicknesses —0.5 / 1 / 1.5 / 2 / 2.5 and 3 mm— to precisely fine-tune the lateral position of the rear axle and achieve a clean and balanced track performance.

Lexan Toyota Yaris Rally (comp. Scalextric)

Lexan Interior

Lexan Toyota Yaris rally compatible Avant

Fabricante: Tectime

Ref: M-L0072R

€2.40

Lexan body of the Toyota Yaris in rally version, designed to fit on Avant Slot chassis in 1/32 scale. Lightweight, durable and ready to be customised with your own racing decorations.

Cable

Cable 1mm x 1 mtr. JP Replica Oxygen Free

Fabricante: Tectime

Ref: M-105

€1.85

JP replica cable made of oxygen-free copper, with over 70 strands and high flexibility. One metre in length with a 1 mm section, ready for competition installations where every detail matters.

TT050 - Rollo trencilla Extreme de tectime

Braids

Extreme braid roll

Fabricante: Tectime

Ref: TT050

€4.26

The Extreme braid from Tectime combines a multiple mesh braid that enhances both the car's front-end behaviour and current entry. A finer and more flexible solution than conventional braids.

M-CR003 - 4 Cojinetes esféricos - de Mustang Slot

Bearings

Spherical bearings x4

Fabricante: Tectime

Ref: M-CR003

€3.52

Four spherical bearings for Mustang (ref. M-CR003) designed to work with the motor mounts of Slot.it, Scaleauto, and Black Arrow. A small spare part with a direct impact on the smoothness and accuracy of your drivetrain.

TT400 - 4 x Goma extrafina traccion media de tectime

Belts

Extra fine medium traction tyre 1/32

Fabricante: Tectime

Ref: TT400

€1.78

Extra-fine medium grip Tectime tyre for 1/32 slot cars with a wheelbase between 76 and 82 mm. A technical and specific option for those seeking the correct setup from the very beginning.

Vista superior del interior Lexan genérico para rally 1/32.

Lexan Interior

Generic rally Lexan interior 1/32

Fabricante: Tectime

Ref: TT3094

€2.91

Generic Lexan interior from Tectime for rally bodies in 1/32 scale. Reduces weight in the upper part of the model, improves the centre of gravity, and meets the most demanding technical checks. Includes driver and co-driver busts, with an adaptability that makes it suitable for a wide variety of bodies.

TT402 - 4 x Goma extrafina traccion baja de tectime

Belts

Extra fine low grip tyre 1/32

Fabricante: Tectime

Ref: TT402

€1.78

Extra-fine transmission rubber and low traction from Tectime for 1/32 slot cars with a wheelbase between 79 and 90 mm. A small part with a direct impact on the car's behaviour on the track.

Lexan velocidad P.9x8 LMH (comp. Scaleauto)

Lexan Interior

NSR compatible C8R speed Lexan

Fabricante: Tectime

Ref: M-L14V

€2.40

Competition lexan interior manufactured by Tectime for NSR Corvette C8R bodies. Designed for speed disciplines, its ultra-lightweight design reduces weight and lowers the centre of gravity, improving stability in the fastest corners.

Lexan Skoda Fabia Rally2 compatible Scaleauto

Lexan Interior

Lexan rally Sierra compatible with Avant Slot

Fabricante: Tectime

Ref: M-L0077R

€2.40

Vacuum-formed lexan interior (cockpit) for Ford Sierra rally, compatible with Avant Slot models. It drastically reduces weight compared to the original injected plastic, decreases the inertia of the body and improves the car's response in direction changes. Reference Tectime M-L0077R.

Muelle suspension blando- corto ø mediano

For bench

Soft suspension spring - short ø medium

Fabricante: Tectime

Ref: TT905

€2.02

The TT905 from Tectime is a soft suspension spring, short in length and medium in diameter, designed to fine-tune the response of the slot chassis according to the type of track and racing conditions.

Allen and Torx screw

10 X M2x6 Stud

Fabricante: Tectime

Ref: TT082

€1.90

Pack of 10 M2 metric studs, 6 mm in length, reference TT082 from Tectime. A workshop essential that is always useful to have on hand when preparing or replacing fastening elements in your setups.

Lexan velocidad Cadillac V-LMdH (comp. Scaleauto)

Lexan Interior

Lexan speed Cadillac V-LMdH (comp. Scaleauto)

Fabricante: Tectime

Ref: M-L13V

€2.40

High-speed Lexan body of the Cadillac V-LMdH, compatible with Scaleauto chassis. Made from fine and flexible polycarbonate, it offers the exact profile of the LMdH prototype for those seeking performance and visual fidelity on track.

TT401 - 4 x Goma extrafina traccion alta de tectime

Belts

Extra fine high grip tyre 1/32

Fabricante: Tectime

Ref: TT401

€1.78

High-traction ultra-fine rubber for 1/32 slot cars from Tectime, designed for wheelbases of 73 to 78 mm. A specific replacement that takes care of every detail of the transmission to maintain track performance.

M-T159SP3W - Tapacubos Type Impreza 15,9mm White de Mustang Slot

Wheel covers

Subaru Type Wheel Covers 15.9mm

Fabricante: Tectime

Ref: M-T159SP3W

€3.68

Four Type Subaru hubcaps printed in 3D, in white, designed for universal wheels of 15.9 mm compatible with Sloting Plus. A finishing detail that makes a difference in any setup.

M-L0043R - Lexán rally Subaru compatible Avant Slot - de Mustang Slot

Lexan Interior

Avant Slot compatible Lexan rally Subaru

Fabricante: Tectime

Ref: M-L0043R

€2.40

Lexan rally body for Subaru compatible with Avant Slot, reference M-L0043R. A lightweight and flexible piece, designed for those who want to customise their car with the colours of their favourite livery or recreate the aesthetics of the great rallies.

Broca de bricolaje slot y modelismo 2,5mm

Herramientas

Drill for reworking crowns, wheels and bearings. Pitch 2.38 (3/32 mm)

Fabricante: Tectime

Ref: TT060

€3.02

Tectime workshop drill (ref. TT060) with a pitch of 2.38 mm (3/32) designed for precisely reworking crowns, wheels, and bearings in slot car preparation and modelling tasks. A specific tool for a specific job: clean and damage-free adjustment on each piece.

Springs

Hard short suspension spring ø medium

Fabricante: Tectime

Ref: TT950

€2.09

Hard, short and medium diameter suspension spring from Tectime (ref. TT950), designed for fine-tuning the suspension in 1/32 slot cars. A key component for those seeking precision in setup and consistent response on track.

Tapacubos Integrale 15,8mm White (comp. Scaleauto)

Wheel covers

Enkeir 16.2 White wheel covers compatible with Sloting Plus

Fabricante: Tectime

Ref: M-T162SP11W

€3.33

Four Enkeir 16.2 hubcaps in white, compatible with Sloting Plus wheels. An aesthetic detail that makes a difference in your 1/32 slot cars, with a clean fit and uniform finish.

Allen and Torx screw

10 X M2x4 Stud

Fabricante: Tectime

Ref: TT087

€1.90

Pack of 10 M2x4 studs from Tectime, reference TT087. Precision screws designed for the assembly and tuning of slot cars, with the reliability demanded by the most demanding preparation workshops.

Tornillos basculación carroceria M2 cortos x10

bench-mounted

Short M2 body tilt screws x10

Fabricante: Tectime

Ref: TT181

€2.00

Pack of 10 short M2 body mounting screws (TT181) from Tectime. With a thread diameter slightly smaller than the standard M2.1, they protect the pins of more delicate bodies without stressing the plastic.

Showing 1-24 of 85 item(s)