Flexible Rubber Wing for P911 GT3R (model 992)

The rear wing your P911 GT3R 992 needs, signed by Scaleauto

When a track hit or an intense preparation session leaves the rear wing of your P911 GT3R (model 992) out of action, the cleanest solution is always to resort to the original spare part from the brand itself. This flexible rubber wing from Scaleauto (reference SC-3630A19) accurately reproduces the geometry of the stock component, ensuring a perfect fit without modifications or additional adjustments.

Function and performance

The wing is one of the most exposed body elements on any slot car. It protrudes above the assembly, receives scrapes from track barriers, and in competition, it can suffer direct impacts. The choice of flexible rubber as a material is not coincidental: it absorbs shocks and recovers its shape without breaking or chipping, something that rigid resin or hard plastic wings cannot always guarantee.

• Flexible material that reduces breakage from impact.
• Identical geometry to the original component of the P911 GT3R model 992.
• Official Scaleauto spare part: fit without adaptations.
• Category 1/32, standard competition scale for sport track.

Compatibility

This wing is specifically designed for the P911 GT3R (model 992) from Scaleauto in 1/32 scale. If your car is from this family and reference, installation is direct. For other models from the brand or earlier generations of the P911 GT3R, consult the corresponding reference in the Scaleauto body spare parts catalogue.

Installation and preparation

The replacement process is straightforward: remove the damaged wing from its anchor points on the body and fit the new one, ensuring it fits correctly at all intended attachment points. Being made of flexible rubber, it does not require special tools or adhesives unless the body has suffered additional damage in the fitting area. A detail that makes a difference on the track and in your collection display.

Common mistakes

The most common mistake is attempting to replace this wing with parts from other generations of the P911 GT3R or from other Scaleauto models. Although they may visually appear similar, the dimensions and anchor points vary between generations. Always verify that the reference of the car you have on hand corresponds to the model 992 before placing your order.

Frequently asked questions

Is this wing compatible with earlier versions of the P911 GT3R from Scaleauto?

Not necessarily. Each generation of the P911 GT3R may have different dimensions and anchor points. This spare part is validated for the model 992. For other versions, consult the Scaleauto spare parts catalogue.

Does the flexible rubber affect the aerodynamic behaviour of the car on track?

In 1/32 scale, the actual aerodynamic effect of the wings is minimal. The choice of flexible material is primarily based on durability and impact resistance criteria, not aerodynamic performance.

Do I need glue to install it?

Under normal conditions, the wing fits into the original anchor points of the body without the need for adhesive. If the anchor area is damaged, it may be necessary to apply a small amount of specific glue for plastic or rubber.

Can I paint it to customise my car?

Yes, although since it is made of flexible rubber, it is advisable to use paints with some elasticity to prevent the finish from cracking with use. Brands like Vallejo or Tamiya offer suitable references for this type of surface.

Is this spare part suitable for club competition use?

Yes. As the official spare part from Scaleauto, it keeps the car within the original specifications, which is especially relevant in competition categories that require stock parts.

The Scaleauto SC-3630A19 is a flexible rubber rear wing designed as an original spare part for the Scaleauto P911 GT3R model 992 in 1/32 scale. Its flexible material ensures durability against track impacts while maintaining a perfect fit to the original bodywork. An essential replacement part for slot car racing enthusiasts and collectors looking to keep their car in top condition.