F1 motor mount for Flat motors

The F1 motor mount from Policar: precision fitting for Flat motors

When preparing a Formula 1 slot car, every detail in the motor installation makes a difference. The Policar F1 motor mount PO-PCH10 is specifically designed to accommodate Flat type motors, ensuring a firm hold, correct alignment, and efficient power transmission to the rear axle.

Function and performance

The motor mount is the component that anchors the motor to the chassis, determining its exact position relative to the rear axle and, therefore, the transmission geometry. A well-designed mount prevents vibrations, reduces wear on the crown gear and pinion, and contributes to a more predictable response on track. The Policar PO-PCH10 is developed to precisely fit Flat motors, whose elongated shape and low profile make them particularly popular in single-seater setups, where space is more limited and the centre of gravity must be kept as low as possible.

Compatibility

This mount is designed for Flat type motors, commonly used in preparations for Formula 1 slot cars and single-seaters in general. If you are working with a Policar chassis from the F1 range, the PO-PCH10 is the corresponding motor mount reference for this type of motorisation. Before purchasing any mount, it is advisable to verify that the motor you are using is compatible with the dimensions specified by the manufacturer.

Installation and preparation

The installation of this mount requires the usual care in any slot preparation work:

• Check the correct alignment of the motor before permanently securing the mount.
• Ensure that the pinion and crown gear are properly aligned, with no excessive lateral play or tightness that could cause unnecessary friction.
• Verify that the mount is perfectly seated on the chassis without any play that could be transmitted to the motor during operation.

A careful installation of this component directly translates into better car response, especially on circuits with many curves where transmission stability is critical.

Frequently asked questions

What type of motor is the PO-PCH10 designed for?

The Policar PO-PCH10 motor mount is specifically designed for Flat type motors, characterised by their low profile and elongated shape, widely used in Formula 1 slot car setups.

Is it compatible with chassis from other brands?

This mount is designed for Policar's F1 range chassis. Compatibility with chassis from other brands will depend on the specific dimensions of each, so we recommend verifying this before installation.

Is it a replacement or an upgrade part?

It can be used both as a direct replacement if the original mount has been damaged, and in a preparation or construction of a chassis from scratch, where it is necessary to position the Flat motor correctly.

Does the choice of motor mount affect track performance?

Yes. A mount that does not fit precisely can cause vibrations, misalignment of the transmission, and premature wear of the crown gear and pinion. Using the correct part for the corresponding motor and chassis is essential for optimal and lasting performance.

The Policar PO-PCH10 is a dedicated F1 motor mount designed for Flat motors, offering precise fitment and solid motor positioning for slot car enthusiasts building or restoring Formula 1 chassis. A key preparation part for competitive and club-level slot racing with monoposto models.