Offset line crown 26Z brass insert

The Slot.it Inline Offset Crown Gear that Makes a Difference in the Drivetrain

When gear precision defines tenths on track, choosing the right crown gear is no minor detail. The Offset Line 26Z Crown Gear with Bronze Insert (reference SIGO26-BZ) from Slot.it is specifically designed for Inline motors mounted on Offset pods, combining a 26-tooth gear with a bronze insert that ensures a firm and durable fit on the rear axle.

Technical Features

• Number of Teeth: 26Z
• Insert Type: Bronze
• Compatible Axle Diameter: 2.38 mm
• Motor System: Inline (longitudinal motor, in line with the car)
• Pod Compatibility: Exclusively Offset pod

Function and Performance

The bronze insert is one of the strong points of this crown gear. Unlike plastic inserts, bronze offers greater wear resistance at the contact point with the axle, reduces mechanical play with continued use, and helps maintain concentricity during rotation. The result is a cleaner transmission, with less vibration and a more direct response to the throttle.

With 26 teeth, this crown gear is positioned in a balanced gear ratio range, suitable for both technical circuits with tight corners and faster layouts, always depending on the pinion it is paired with.

Compatibility and Installation

This crown gear is designed exclusively for use with Offset pods in Inline motor configuration. It is not interchangeable with Sidewinder or Anglewinder pods, as the geometry of the drivetrain differs in each case. Before purchasing, verify that your chassis or pod uses this specific system.

The compatible axle is 2.38 mm, the most common standard in Slot.it cars and kits. Installation is done by pressing the crown gear onto the axle until the bronze insert is properly seated; it is recommended to check the perpendicularity to the pinion to avoid premature wear.

Common Mistakes to Avoid

• Installing this crown gear on a non-Offset pod: the geometry will not match and the engagement will be incorrect.
• Forcing installation on axles with a diameter different from 2.38 mm, which may damage the bronze insert.
• Not checking the pinion-crown alignment after installation, especially if the drivetrain group has been disassembled.

Frequently Asked Questions

Can I use this crown gear on a Sidewinder pod?

No. This crown gear belongs to the Inline Offset line and is designed to work exclusively with Offset pods. In a Sidewinder configuration, the geometry of the drivetrain is different and would not be compatible.

What advantage does the bronze insert have over plastic?

Bronze is more wear-resistant at the contact with the steel axle, maintains better concentricity over time, and reduces mechanical play. For intensive running sessions or club racing, it makes a real difference in the car's consistency.

Which pinions is it compatible with?

The available information does not specify the specific pinions recommended by Slot.it for this crown gear. We recommend consulting the Slot.it gear ratio chart or contacting us for guidance based on your motor and track configuration.

Is it suitable for Sport track?

This crown gear is an internal transmission component of the car and does not depend on the type of track. It can be used on any circuit, whether Sport track (Scaleauto, Slot.it) or Universal track (Scalextric, Ninco), as long as the chassis has an Offset pod with an Inline motor.

Do I need special tools to install it?

For a clean and precise installation, it is recommended to use a pressing tool or crown extractor that allows controlled force to be applied to the insert, avoiding damage to the teeth or deformation of the axle. We have specific tools for this type of operation.

The Slot.it SIGO26-BZ is a 26-tooth inline offset crown gear with a bronze insert, designed for 2.38 mm axles and exclusive use with Offset motor pods. A precise, durable slot car transmission component ideal for club racing and serious hobbyists looking to optimize their drivetrain setup.