AIRBRUSH CLEANER 85 ml

The maintenance of the airbrush starts with the right product: Vallejo Cleaner (71099) in 85 ml format.

A well-maintained airbrush is as important as the paint it uses. Over time, acrylic residues accumulate in the nozzle, valve, and internal passages, hindering flow, altering the air-paint mixture, and in extreme cases, rendering the instrument unusable. The Vallejo 71099 Airbrush Cleaner has been designed to prevent exactly that.

What it is for and how it works

This cleaner works by dissolving the pigments and binders of water-based acrylic paints — such as the entire Vallejo Model Air, Model Color range and similar — without harming the rubber seals, gaskets, or metal parts of the airbrush. The result is clean equipment, with a constant flow and ready for the next colour without interference or chromatic contamination.

Its use is intended for two key moments:

• Quick cleaning between colours: simply run the cleaner through the cup and spray until it comes out clear. In a few seconds, the airbrush is ready to load the next shade.
• Deep cleaning: when paint has dried inside the nozzle or valve, it is recommended to soak these disassembled parts in the cleaner for a few hours to dislodge the most stubborn sediments. Always avoid submerging the entire body of the airbrush.

Compatibility and safety

The Vallejo 71099 Cleaner is compatible with all types of airbrushes, regardless of brand or action system (single or double). Its non-corrosive formula makes it safe for the most delicate components, and being water-based, it is much less aggressive than traditional solvents, both for the operator and the working environment.

It is especially recommended if you regularly work with Vallejo, Kaleido, Tamiya, or Ammo paints in modelling projects, dioramas, figures, or slot car bodies, where cleaning between sessions makes a difference in the final result.

Usage tips

• After each session, run the cleaner through the airbrush before storing the equipment; it will prevent residues from drying inside.
• For deep cleaning, disassemble the nozzle and needle before immersion.
• Shake the container well before use if it has been stored for a while.
• Keep the bottle tightly closed in a cool place away from heat sources.

Frequently asked questions

Is it suitable for acrylic paints from other brands, not just Vallejo?

Yes. Although it is optimized for the Vallejo range, its formula works on water-based acrylics in general, so it works correctly with paints from Tamiya, Kaleido, Ammo, and other water-based brands.

Can I use this cleaner with a double-action airbrush?

No problem. It is compatible with any airbrush, regardless of whether it is single or double action, and of the brand of the equipment.

How long should I soak the nozzle for a deep cleaning?

About two to three hours is usually sufficient to dissolve the most hardened deposits. In cases of very severe accumulation, you can leave it overnight.

Is it necessary to dilute the product before use?

No. It is used directly as it comes in the container, without the need for dilution.

Can the cleaner damage the rubber seals of the airbrush?

No. The non-corrosive formula of Vallejo 71099 has been developed precisely to respect the seals, gaskets, and plastic components of the airbrush. This is one of its strong points compared to more aggressive solvents.

Are 85 ml sufficient for regular use?

For quick cleanings between colours, the consumption is low, so an 85 ml bottle lasts through many sessions. If you frequently perform deep cleanings by immersion, the consumption increases slightly.

Keep your airbrush in perfect working condition with the Vallejo Airbrush Cleaner 71099 (85 ml). Specially formulated to remove acrylic paint residues without damaging seals or internal components, it's the go-to maintenance product for scale modellers, miniature painters, and slot car enthusiasts who demand consistent, clog-free performance from their tools. Compatible with all airbrush brands and acrylic paint ranges.