Soft Spring 0.4mm

Adjust the stiffness of your pod with the Avant Slot Soft Spring 0.4 mm

When it comes to tuning in 1/32 slot racing, pod springs are one of those components that often go unnoticed until you decide to change them. The Soft Spring 0.4 mm (ref. av20568a) from Avant Slot is a specific replacement for the car's pod, designed for those who want to precisely control the stiffness and response of the rear end according to the track layout and driving style.

Function and performance

The pod is the assembly that houses the motor and rear axle, and its mechanical behaviour largely depends on the springs that hold it. A softer spring allows for greater movement and absorption of irregularities on the track, resulting in a smoother and more progressive traction transmission. This 0.4 mm model falls within the soft range, suitable for setups that prioritise the adaptability of the rear end over stiffness.

• Gauge: 0.4 mm (soft range)
• Application: pod for 1/32 scale slot cars
• Brand: Avant Slot
• Reference: av20568a

Compatibility

This spring is designed for Avant Slot pod assemblies in 1/32 scale. If you have doubts about whether it is compatible with your specific model, we recommend checking the pod reference of your car before placing the order.

Installation and preparation

Changing pod springs is one of the most common tuning operations in any preparer's workbench. It does not require special tools, but it does require a bit of patience and organisation to avoid losing parts during disassembly. It is advisable to clean the area before installing the new spring and ensure that the seat is well aligned to avoid asymmetrical tensions.

Common mistakes

• Confusing the gauge: a 0.4 mm spring is noticeably softer than a 0.5 mm or 0.6 mm spring. Ensure that the chosen gauge corresponds to the setup you are looking for.
• Installing without checking the condition of the pod: if the pod shows wear or excessive play, changing the spring will not resolve the underlying issue.
• Applying asymmetrical tension: when installing, check that the spring is centred and free of twist to avoid introducing lateral imbalances.

Frequently asked questions

What is the difference between a soft spring and a hard spring in the pod?

A soft spring allows for more vertical and lateral movement of the pod, which smooths out power transmission and improves the contact of the braids on uneven tracks. A hard spring limits that movement and offers a more direct response, preferred on very technical and well-leveled tracks.

Is this spring compatible with any Avant Slot 1/32 car?

It is designed for Avant Slot pod systems in 1/32 scale. We recommend verifying compatibility with your specific car model by consulting the corresponding pod reference.

What gauge of spring should I compare it with to make the right choice?

Avant Slot offers springs in different gauges. The 0.4 mm is the softest in the usual range; if you are looking for greater stiffness, there are options of 0.5 mm or higher. The choice depends on the track, the motor, and the driving style.

Is it necessary to change both springs at the same time?

To maintain symmetrical behaviour of the pod, it is advisable to replace both springs at the same time, especially if they have seen a lot of use.

How do I know if my pod needs new springs?

If you notice irregular loss of traction, metallic noise in the rear end, or erratic behaviour on track that cannot be corrected with usual tuning, checking the condition of the pod springs is one of the first steps.

The Avant Slot av20568a Soft Spring 0.4mm is a precision replacement part for 1/32 scale slot car rear axle pod setups. Designed to provide a softer suspension response, this spring is ideal for fine-tuning traction and handling on club and home racing tracks. A must-have spare for Avant Slot 1/32 chassis preparation and setup.