Cross screw DIN 7985 M2x5 (10pcs)

Small Screw, Big Star in the Workshop

In the world of slot and modelling, the tiniest details are often the most critical. The DIN 7985 M2x5 cross head screw is one of those elements that, when missing, halts the assembly of a chassis, the attachment of a body, or the construction of a static model. Having a pack of 10 spare units is simply working smart.

Features and Specifications

• Standard: DIN 7985 (low cylindrical head with Philips cross recess)
• Metric: M2
• Length: 5 mm
• Head: low cylindrical, cross slot (Pozidriv / Phillips)
• Pack Contents: 10 units

The DIN 7985 standard defines a low-profile cylindrical head with a cross drive, making it easier to tighten in confined spaces with precision screwdrivers, a common tool in any slot or modelling preparation workshop.

Applications in Slot and Modelling

The M2 metric with a length of 5 mm frequently appears in:

• Attachment of bodywork to chassis in slot cars of various scales.
• Securing motor mounts and axle supports.
• Assembly of 3D printed or machined parts in preparation workshops.
• Construction of static models, figures, and dioramas where small diameter screws are required.
• Repair and customization of small format controls and electronics.

Assembly and Preparation

To work with M2 screws without damaging the head or the base material, it is advisable to use a precision screwdriver of the appropriate size (PH0 or PH00 depending on the model). Applying minimal axial pressure while turning prevents the tool from slipping and damaging the cross recess. If the screw is threaded into plastic or resin, do not overtighten: the torque for M2 is very small and the material can suffer.

In installations that may experience vibrations — such as a slot car on track — it may be advisable to use a drop of low-strength thread locker to prevent the screw from loosening over time, without compromising future disassembly.

Why Have a Spare Pack?

M2 screws are the most common in the hobby and, precisely for that reason, they are the first to run out in the workshop drawer. Having 10 spare units in reference CXM370 ensures continuity in work without interruptions due to lack of material. They are easy to lose, easy to damage if overtightened… and very easy to keep on hand if stock is planned well.

Frequently Asked Questions

What is the difference between DIN 7985 and DIN 965?

The DIN 7985 standard defines a cylindrical head (flat on top) with a cross recess, while DIN 965 corresponds to a countersunk (conical) head also with a cross. They are different head profiles and not interchangeable in applications where the head must be flush with the surface.

What screwdriver is used to tighten a DIN 7985 M2 cross screw?

It is common to use a precision screwdriver PH0 or PH00 (Phillips). Some modelling tool manufacturers include tips of this size in their precision sets. Working with the correct tip prevents damage to the recess in the head.

Can I use them directly on plastic?

Yes, as long as the hole is correctly sized. In plastic, it is ideal to make a pilot hole of slightly smaller diameter than the screw metric and not to overtighten to avoid melting or fracturing the material. In slot applications, many chassis already incorporate inserts or the material itself is prepared for direct M2 threading.

Does this pack include nuts or washers?

No. The CXM370 pack contains only 10 DIN 7985 M2x5 cross screws. If you need nuts, washers, or other complementary fastening elements, they are available as independent references.

Are they suitable for use with thread locker?

Yes. They can be used with low-strength thread locker without issue. In applications subject to vibration, such as assemblies in competitive slot cars, this practice helps maintain tightness without hindering future disassembly.

The DIN 7985 M2x5 cross head screw pack (10 units) — reference CXM370 — is an essential workshop consumable for slot car builders, static model kit assemblers and diorama makers. Compliant with DIN 7985 standard, this M2 metric, 5 mm length Phillips head screw fits a wide range of chassis, bodywork and component assembly applications in 1:32 and 1:24 scale slot cars, as well as plastic model kits and miniature figure projects. Keep a spare pack on your workbench and never let a missing fastener stop a build.