M2x8 conical Philips screws (x20)

The M2x8 Countersunk Phillips Screws Every Slot Racer Needs to Have on Hand

Small in size, big in importance. The M2x8 countersunk Phillips screws are one of those consumables that make a difference when it comes time to assemble, disassemble, or adjust with precision. Made from stainless steel, they offer corrosion resistance and durability that makes them reliable for continuous use in the workshop.

Main Features

• Metric: M2
• Length: 8 mm
• Head Type: countersunk Phillips
• Material: stainless steel
• Contents: bag of 20 units
• Reference: SP153208

Function and Performance

The countersunk head allows the screw to sit flush or slightly recessed in the surface, which is especially useful when working in areas where the protrusion of the head could interfere with the movement of parts or the fitting of bodies. The Phillips drive facilitates tightening with a PH0 or PH1 screwdriver, common in any slot car workshop toolbox.

Compatibility and Applications

The M2 metric is one of the most commonly used for assembling chassis, mounts, motor supports, and a multitude of slot car components in 1:32 and 1:24 scale. Its length of 8 mm makes them suitable for securing parts of certain thickness or for situations where a bit more grip is needed than what a shorter screw can provide. They are compatible with standard M2 nuts and threaded inserts of the same pitch.

Assembly and Preparation

To get the most out of these screws, it is advisable to use a precision screwdriver with a Phillips tip appropriate for the size of the head, thus avoiding damage to the drive. Being made of stainless steel, there is no need to apply anti-corrosion products, although a light touch of assembly grease can facilitate tightening and subsequent disassembly without damaging the thread.

Frequently Asked Questions

What screwdriver do I need for these screws?

As they have a Phillips head, you need a PH0 or PH1 screwdriver, depending on the exact size of the head. A precision screwdriver is highly recommended for working with small slot model components.

Are they compatible with standard M2 nuts?

Yes. Being standard M2 metric screws, they are compatible with any standard pitch M2 nut (0.4 mm), as well as with nylon inserts and nuts of the same gauge.

Why choose stainless steel over carbon steel?

Stainless steel does not rust with the ambient humidity of the workshop or with contact with greases or lubricants. For small screws that are frequently handled, it is the most practical long-term option.

For what types of assembly is the countersunk head most suitable?

The countersunk head is designed to sit flush with the surface or slightly recessed into it. It is ideal for applications where a protruding head could interfere with other parts or compromise the fitting of the assembly.

Can I reuse these screws multiple times?

Yes, as long as the drive of the head shows no wear and the thread is in good condition. Stainless steel tolerates repeated cycles of assembly and disassembly well, especially if the correct tool is used.

M2x8 countersunk Phillips screws in stainless steel, pack of 20 units. Essential fasteners for slot car chassis assembly, motor mounts and body fixings in 1:32 and 1:24 scale. Compatible with standard M2 nuts and threaded inserts. Ref. SP153208, available at Ministry of Hobby.